[PATCH 1/4] phy: qcom-qmp-combo: correct sm8550 PHY programming

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed Sep 6 00:58:20 PDT 2023


Move PCS_USB3_POWER_STATE_CONFIG1 register programming from pcs_tbl to
the pcs_usb_tbl, where it belongs. Also, while we are at it, correct the
offset of this register to point to 0x00, as expected.

Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Fixes: 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets")
Cc: Abel Vesa <abel.vesa at linaro.org>
Cc: stable at vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c      | 2 +-
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index cbb28afce135..41b9be56eead 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -859,7 +859,6 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10),
-	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),
 };
 
 static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = {
@@ -867,6 +866,7 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
 	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68),
 };
 
 static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
index 9510e63ba9d8..5409ddcd3eb5 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
@@ -12,7 +12,6 @@
 #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3		0xcc
 #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6		0xd8
 #define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1		0xdc
-#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1	0x90
 #define QPHY_USB_V6_PCS_RX_SIGDET_LVL			0x188
 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L		0x190
 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H		0x194
@@ -23,6 +22,7 @@
 #define QPHY_USB_V6_PCS_EQ_CONFIG1			0x1dc
 #define QPHY_USB_V6_PCS_EQ_CONFIG5			0x1ec
 
+#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1	0x00
 #define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x18
 #define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x3c
 #define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x40
-- 
2.39.2




More information about the linux-phy mailing list