[PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node

[Praveenkumar I]

Add USB Super-Speed UNIPHY node and populate the phandle on
gcc node for the parent clock map.

Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3fef2f80a81..b08ffd8c094e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -158,6 +158,29 @@ usbphy0: phy at 7b000 {
 			status = "disabled";
 		};
 
+		usbphy1: phy at 4b0000 {
+			compatible = "qcom,ipq5332-usb-uniphy";
+			reg = <0x4b0000 0x800>;
+
+			clocks = <&gcc GCC_PCIE3X1_PHY_AHB_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "ahb",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets =  <&gcc GCC_USB0_PHY_BCR>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk_src";
+
+			qcom,phy-usb-mux-sel = <&tcsr 0x10540>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom: efuse at a4000 {
 			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x721>;
@@ -200,7 +223,7 @@ gcc: clock-controller at 1800000 {
 				 <&sleep_clk>,
 				 <0>,
 				 <0>,
-				 <0>;
+				 <&usbphy1>;
 		};
 
 		tcsr_mutex: hwlock at 1905000 {
-- 
2.34.1