[RFC PATCH v2 net-next 12/15] net: phylink: add the 25G link modes to phylink_c73_priority_resolution[]

[Vladimir Oltean]

Allow phylink_resolve_c73() to resolve backplane (KR) or SFP28 (CR)
link speeds of 25Gbps.

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
v1->v2: patch is new

 drivers/net/phy/phylink.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 157984dd81de..484db2a5b62b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -3382,6 +3382,10 @@ static struct {
 	/* 100GBASE-KP4 and 100GBASE-CR10 not supported */
 	{ ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 },
 	{ ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 },
+	{ ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, SPEED_25000 },
+	{ ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, SPEED_25000 },
+	{ ETHTOOL_LINK_MODE_25000baseKR_S_Full_BIT, SPEED_25000 },
+	{ ETHTOOL_LINK_MODE_25000baseCR_S_Full_BIT, SPEED_25000 },
 	{ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 },
 	{ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 },
 	/* 5GBASE-KR not supported */
-- 
2.34.1