June 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jun 1 02:33:07 EDT 2012
Ending: Fri Jun 29 23:56:01 EDT 2012
Messages: 376

• [oselas] NOR boot support for barebox on the mini2440   Juergen Beisert
• [PATCH 0/2] Small fixes   Roberto Nibali
• [PATCH 0/2] Small fixes   Sascha Hauer
• [PATCH 0/4] MIPS: XBurst: fix the JZ4755's clocksource   Antony Pavlov
• [PATCH 0/5] minor SPI flash fixes   Johannes Stezenbach
• [PATCH 0/5] minor SPI flash fixes   Sascha Hauer
• [PATCH 0/6] fix dma memory allocations, add dma_alloc/dma_free   Marc Kleine-Budde
• [PATCH 0/6] fix dma memory allocations, add dma_alloc/dma_free   Marc Kleine-Budde
• [PATCH 0/6] misc ethernet fixes and new driver   Johannes Stezenbach
• [PATCH 0/6] misc ethernet fixes and new driver   Sascha Hauer
• [PATCH 0/6] Support cross-compiling on Mac OS X   Dirk Hörner
• [PATCH 0/6] Support cross-compiling on Mac OS X   Sascha Hauer
• [PATCH 01/10] mtd: fix arguments to bad block ioctls   Sascha Hauer
• [PATCH 01/12] mach-davinci: add platform and minimal board file for HMI10   Jan Luebbe
• [PATCH 01/12] MMC i.MX esdhc: Fix sparse warnings   Sascha Hauer
• [PATCH 02/10] nand-bb: bb->offset may become a 64bit type   Sascha Hauer
• [PATCH 02/12] mach-davinci: add GPIO support   Jan Luebbe
• [PATCH 02/12] tlsf: Use NULL instead of 0 for returning NULL pointers   Sascha Hauer
• [PATCH 03/10] use loff_t for file offsets   Sascha Hauer
• [PATCH 03/12] mach-davinci: add pin mux support   Jan Luebbe
• [PATCH 03/12] mach-davinci: add pin mux support   Sascha Hauer
• [PATCH 03/12] qsort: declare strcmp_compar publically   Sascha Hauer
• [PATCH 04/10] introduce strtoull_suffix function   Sascha Hauer
• [PATCH 04/12] Do not use iomem space for dev_get_mem_region   Sascha Hauer
• [PATCH 04/12] mach-davinci: setup pin mux for da850   Jan Luebbe
• [PATCH 04/12] mach-davinci: setup pin mux for da850   Sascha Hauer
• [PATCH 05/10] make parse_area_spec arguments loff_t   Sascha Hauer
• [PATCH 05/12] define __user empty   Sascha Hauer
• [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller)   Jan Luebbe
• [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller)   Sascha Hauer
• [PATCH 06/10] make memory display 64bit capable   Sascha Hauer
• [PATCH 06/12] ARM i.MX speed: sparse fixes   Sascha Hauer
• [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI)   Jan Luebbe
• [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI)   Sascha Hauer
• [PATCH 07/10] make st_size in struct stat 64 bit   Sascha Hauer
• [PATCH 07/12] mach-davinci: add support for AEMIF (NAND flash)   Jan Luebbe
• [PATCH 07/12] USB ohci: Fix sparse warnings   Sascha Hauer
• [PATCH 08/10] make cdev 64bit capable   Sascha Hauer
• [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller   Jan Luebbe
• [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller   Sascha Hauer
• [PATCH 08/12] net smc911x: Use __iomem for register base   Sascha Hauer
• [PATCH 09/10] memory commands: Make 64bit capable   Sascha Hauer
• [PATCH 09/12] ARM i.MX clocksource: put registers in iomem space   Sascha Hauer
• [PATCH 09/12] board hmi10: enable support for NAND   Jan Luebbe
• [PATCH 1/1] menu: export box state to menu_box_state when using a command   Sascha Hauer
• [PATCH 1/2] add 'poweroff' command   Antony Pavlov
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add a simple watchdog framework   Sascha Hauer
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add a simple watchdog framework   Sascha Hauer
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add a simple watchdog framework   Juergen Beisert
• [PATCH 1/2] Add basename command   Sascha Hauer
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Juergen Beisert
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Uwe Kleine-König
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Juergen Beisert
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Uwe Kleine-König
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Juergen Beisert
• [PATCH 1/2] ARM/MXS: add new way to reset the whole SoC   Juergen Beisert
• [PATCH 1/2] ARM defconfigs: Use TLSF malloc on defconfigs getting too big   Sascha Hauer
• [PATCH 1/2] ARM i.MX23 usb: move to SoC specific functions   Sascha Hauer
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Marc Kleine-Budde
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Uwe Kleine-König
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Uwe Kleine-König
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Uwe Kleine-König
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/2] i.MX51: Synchronize iomux header file from kernel   Alexander Shiyan
• [PATCH 1/2] i.MX51: Synchronize iomux header file from kernel   Sascha Hauer
• [PATCH 1/2] menu: add support to do not display the entry number   Sascha Hauer
• [PATCH 1/2] MIPS: make possible board-specific header files   Antony Pavlov
• [PATCH 1/2] MIPS: make possible board-specific header files   Sascha Hauer
• [PATCH 1/2] Move /dev/zero to separate unit   Alexander Shiyan
• [PATCH 1/2] Move /dev/zero to separate unit   Sascha Hauer
• [PATCH 1/2] Remove superfluous SYSCTL_RSTA   Roberto Nibali
• [PATCH 1/2] Setup UART-pads via iomux interface   Alexander Shiyan
• [PATCH 1/3] defaultenv-2 ifup: Always overwrite eth0.serverip   Sascha Hauer
• [PATCH 1/3] I.MX clko: Using strtol function instead strtoul for getting argument for clko source   Alexander Shiyan
• [PATCH 1/3] I.MX clko: Using strtol function instead strtoul for getting argument for clko source   Sascha Hauer
• [PATCH 1/3] I.MX clko: Using strtol function instead strtoul for getting argument for clko source   Alexander Shiyan
• [PATCH 1/3] I.MX clko: Using strtol function instead strtoul for getting argument for clko source   Sascha Hauer
• [PATCH 1/3] menu: factor out a function to print an entry   Sascha Hauer
• [PATCH 1/4] ARM mxs: Add mxs_reset_block function   Sascha Hauer
• [PATCH 1/4] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Antony Pavlov
• [PATCH 1/4] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Sascha Hauer
• [PATCH 1/5] blackfin: add __ashrdi3   Sascha Hauer
• [PATCH 1/5] m25p80: prevent endless loop in erase   Johannes Stezenbach
• [PATCH 1/6] ARM mmu: don't use CONFIG_MMU to disable mmu code, there are static inline versions   Marc Kleine-Budde
• [PATCH 1/6] kbuild: Use Elfnn_Half as replacement for Elfnn_Section   Dirk Hörner
• [PATCH 1/6] miidev: fix auto negotiation   Johannes Stezenbach
• [PATCH 1/6] miidev: fix auto negotiation   Roberto Nibali
• [PATCH 1/6] miidev: fix auto negotiation   Johannes Stezenbach
• [PATCH 1/9] USB core: allocate setup_packet using dma_alloc   Sascha Hauer
• [PATCH 10/10] partitions: Make 64bit capable   Sascha Hauer
• [PATCH 10/12] drivers/spi: add driver for the davinci SPI master   Jan Luebbe
• [PATCH 10/12] USB gadget fsl: Put registers into iomem space   Sascha Hauer
• [PATCH 11/12] board hmi10: enable support for SPI   Jan Luebbe
• [PATCH 11/12] fs FAT: fix warning: Using plain integer as NULL pointer   Sascha Hauer
• [PATCH 12/12] board hmi10: add default config   Jan Luebbe
• [PATCH 12/12] of: Fix usage of 0 as NULL pointer   Sascha Hauer
• [PATCH 2/2] Add dirname command   Sascha Hauer
• [PATCH 2/2] Added "/dev/full" and "/dev/null" devices   Alexander Shiyan
• [PATCH 2/2] Add two architectures which can detect the reset source   Juergen Beisert
• [PATCH 2/2] Add two architectures which can detect the reset source   Marc Kleine-Budde
• [PATCH 2/2] Add two architectures which can detect the reset source   Juergen Beisert
• [PATCH 2/2] Add two architectures which can detect the reset source   Marc Kleine-Budde
• [PATCH 2/2] Add two architectures which can detect the reset source   Juergen Beisert
• [PATCH 2/2] Add two architectures which can detect the reset source   Sascha Hauer
• [PATCH 2/2] Add two architectures which can detect the reset source   Juergen Beisert
• [PATCH 2/2] Add two architectures which can detect the reset source   Sascha Hauer
• [PATCH 2/2] Add two architectures which can detect the reset source   Roberto Nibali
• [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28   Juergen Beisert
• [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28   Juergen Beisert
• [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28   Juergen Beisert
• [PATCH 2/2] ARM/MXS: add a watchdog driver for i.MX28   Juergen Beisert
• [PATCH 2/2] ARM/MXS: remove the now obsolete mxs reset routine   Juergen Beisert
• [PATCH 2/2] ARM/MXS: remove the now obsolete mxs reset routine   Juergen Beisert
• [PATCH 2/2] ARM: initial ConnectCore® i.MX51 board support   Alexander Shiyan
• [PATCH 2/2] ARM at91sam9m10g45ek: Enable lzo decompression   Sascha Hauer
• [PATCH 2/2] ARM i.MX28 usb: Add USBPHY support   Sascha Hauer
• [PATCH 2/2] Deal properly with scripts/bareboxenv-target   Roberto Nibali
• [PATCH 2/2] MIPS: XBurst: suitable solution for per-board debug_ll   Antony Pavlov
• [PATCH 2/2] MIPS: XBurst: suitable solution for per-board debug_ll   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] MIPS: XBurst: suitable solution for per-board debug_ll   Antony Pavlov
• [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization   Alexander Shiyan
• [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization   Sascha Hauer
• Re[2]: [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization   Alexander Shiyan
• [PATCH 2/2] mx51-pdk: Move lowlevel_init before UART initialization   Sascha Hauer
• [PATCH 2/2] rzx50: add poweroff support   Antony Pavlov
• [PATCH 2/2] rzx50: add poweroff support   Sascha Hauer
• [PATCH 2/2] rzx50: add poweroff support   Antony Pavlov
• [PATCH 2/3] Add next generation default environment template   Juergen Beisert
• [PATCH 2/3] Add next generation default environment template   Sascha Hauer
• [PATCH 2/3] defaultenv-2: mount tftp server specified in $eth0.serverip   Sascha Hauer
• [PATCH 2/3] i.MX clko: Added support for more than one CLKO outputs   Alexander Shiyan
• [PATCH 2/3] i.MX clko: Added support for more than one CLKO outputs   Sascha Hauer
• [PATCH 2/3] net: Use dev_name directly   Sascha Hauer
• [PATCH 2/4] clocksource: move the NSEC_PER_SEC constant to common header   Antony Pavlov
• [PATCH 2/4] dma: add mxs-apbh-dma driver   Sascha Hauer
• [PATCH 2/5] m25p80: allow erase to be interrupted   Johannes Stezenbach
• [PATCH 2/5] openrisc: link to libgcc   Sascha Hauer
• [PATCH 2/5] openrisc: link to libgcc   Sascha Hauer
• [PATCH 2/6] ARM mmu: introduce dma_alloc, dma_free   Marc Kleine-Budde
• [PATCH 2/6] make: use wc -c instead of stat -c%s to get file sizes   Dirk Hörner
• [PATCH 2/6] make: use wc -c instead of stat -c%s to get file sizes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] make: use wc -c instead of stat -c%s to get file sizes   Sascha Hauer
• [PATCH 2/6] make: use wc -c instead of stat -c%s to get file sizes   Dirk Hörner
• [PATCH 2/6] miidev: actually probe the PHY   Johannes Stezenbach
• [PATCH 2/6] miidev: actually probe the PHY   Roberto Nibali
• [PATCH 2/6] miidev: actually probe the PHY   Johannes Stezenbach
• [PATCH 2/9] USB core: device descriptor using dma_alloc   Sascha Hauer
• [PATCH 3/3] defaultenv-2: remove global.tftp.path   Sascha Hauer
• [PATCH 3/3] dos partitions: enable disk size guessing only for bios disks   Sascha Hauer
• [PATCH 3/3] i.MX51: Added support for "clko" command   Alexander Shiyan
• [PATCH 3/4] MIPS: XBurst: fix the JZ4755's clocksource input frequency value   Antony Pavlov
• [PATCH 3/4] MIPS: XBurst: fix the JZ4755's clocksource input frequency value   Sascha Hauer
• [PATCH 3/4] mtd nand: add mxs-nand driver   Sascha Hauer
• [PATCH 3/4] mtd nand: add mxs-nand driver   Marek Vasut
• [PATCH 3/4] mtd nand: add mxs-nand driver   Sascha Hauer
• [PATCH 3/5] m25p80: progressbar tweak   Johannes Stezenbach
• [PATCH 3/5] mips: Add missing ffs include   Sascha Hauer
• [PATCH 3/6] make: check for greadlink first, fall back to readlink   Dirk Hörner
• [PATCH 3/6] make: check for greadlink first, fall back to readlink   Michael Olbrich
• [PATCH 3/6] miidev: add support for 1000Mbit   Johannes Stezenbach
• [PATCH 3/6] nios: add dma_alloc, dma_free and asm/dma.h   Marc Kleine-Budde
• [PATCH 3/9] USB core: Allocate tmpbuf using dma_alloc   Sascha Hauer
• [PATCH 4/4] ARM mxs: add bcb command to create 'boot control block' for NAND boot   Sascha Hauer
• [PATCH 4/4] MIPS: XBurst: use clocks_calc_mult_shift() for JZ4755's clocksource   Antony Pavlov
• [PATCH 4/5] devfs: don't erase past the end of the partition   Johannes Stezenbach
• [PATCH 4/5] nios2: Add missing ffs include   Sascha Hauer
• [PATCH 4/6] blackfin, mips, openrisc, ppc, sandbox, x86: add transparent dma_alloc, dma_free inlines   Marc Kleine-Budde
• [PATCH 4/6] hostcc tools: include "compiler.h", fix included headers   Dirk Hörner
• [PATCH 4/6] miidev: consistent md and mw on phy regs   Johannes Stezenbach
• [PATCH 4/6] miidev: consistent md and mw on phy regs   Sascha Hauer
• [PATCH 4/9] USB ehci: Use dma coherent buffers for qh/qtd   Sascha Hauer
• [PATCH 5/5] fs: limit flash erase and protect to the partiton boundary   Johannes Stezenbach
• [PATCH 5/5] x86: Add missing ffs include   Sascha Hauer
• [PATCH 5/6] eth: eth MAC addresses are six bytes   Johannes Stezenbach
• [PATCH 5/6] scripts/compiler.h: fixup endianess defines on OS X   Dirk Hörner
• [PATCH 5/6] USB gadget fsl: request cacheline aligned buffer   Marc Kleine-Budde
• [PATCH 5/8] arm: mxs: add functions to get/set vddio   Sascha Hauer
• [PATCH 5/9] USB ehci: put fields of struct qTD directly into struct QH   Sascha Hauer
• [PATCH 6/6] drivers/net: add designware driver   Johannes Stezenbach
• [PATCH 6/6] drivers/net: add designware driver   Sascha Hauer
• [PATCH 6/6] drivers/net: add designware driver   Johannes Stezenbach
• [PATCH 6/6] drivers/net: add designware driver   Sascha Hauer
• [PATCH 6/6] scripts/genenv: always pass template to mktemp   Dirk Hörner
• [PATCH 6/6] USB gadget: Fix dma memory allocations   Marc Kleine-Budde
• [PATCH 6/9] USB storage: use dma_alloc where appropriate   Sascha Hauer
• [PATCH 7/9] block: use dma_alloc to allocate buffers   Sascha Hauer
• [PATCH 8/8] arm: mxs: add write support for ocotp   Sascha Hauer
• [PATCH 8/9] partition: Use dma_alloc for allocating buffers   Sascha Hauer
• [PATCH 9/9] USB ehci: rework cache handling   Sascha Hauer
• [PATCH] 64bit file support   Sascha Hauer
• [PATCH] Add a simple watchdog 'framework' to Barebox   Juergen Beisert
• [PATCH] add basename/dirname commands   Sascha Hauer
• [PATCH] ARM/MXS: free the watchdog from acting as a system reset source on demand   Juergen Beisert
• [PATCH] ARM: initial ConnectCore® i.MX51 board support   Alexander Shiyan
• [PATCH] ARM: initial ConnectCore® i.MX51 board support   Sascha Hauer
• Re[2]: [PATCH] ARM: initial ConnectCore® i.MX51 board support   Alexander Shiyan
• [PATCH] ARM: initial ConnectCore® i.MX51 board support   Sascha Hauer
• [PATCH] arm defconfig binary size reduction   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: add mci1   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: add mci1   Robert Schwebel
• [PATCH] ARM i.MX51 babbage: add mci1   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: add mci1   Robert Schwebel
• [PATCH] ARM mxs: Clear USB boot mode during startup   Sascha Hauer
• [PATCH] ARM mxs: Clear USB boot mode during startup   Juergen Beisert
• [PATCH] ARM qil-a9260: Fix PARTITION_FIXED compilation   Sascha Hauer
• [PATCH] blackfin: Fix build due to missing __raw_* io accessors   Sascha Hauer
• [PATCH] commands/crc: add a trailing newline after output of checksum   Uwe Kleine-König
• [PATCH] commands/crc: add a trailing newline after output of checksum   Sascha Hauer
• [PATCH] commands/crc: assert newline after output with big offsets   Uwe Kleine-König
• [PATCH] commands: add msleep command   Steffen Trumtrar
• [PATCH] commands: add msleep command   Antony Pavlov
• [PATCH] commands: add msleep command   Sascha Hauer
• [PATCH] commands: add msleep command   Sascha Hauer
• [PATCH] commands: uncompress: fix description   Alexander Shiyan
• [PATCH] common: fix typo cammand_var_complete   Steffen Trumtrar
• [PATCH] common: fix typo cammand_var_complete   Sascha Hauer
• [PATCH] complete: fix parameter complete with multiple '.'   Sascha Hauer
• [PATCH] defaultenv-2 ifup: create network up state file for dhcp   Sascha Hauer
• [PATCH] defaultenv/bin/init: skip autoboot if $autoboot_timeout is unset   Jan Luebbe
• [PATCH] defaultenv/bin/init: skip autoboot if $autoboot_timeout is unset   Sascha Hauer
• [PATCH] drivers/base: bail out if request_iomem_region fails   Sascha Hauer
• [PATCH] drivers/nor/m25p80.c: fix erase loop for unaligned addresses   Jan Luebbe
• [PATCH] drivers/nor/m25p80.c: fix erase loop for unaligned addresses   Sascha Hauer
• [PATCH] drivers/video: support three ways to select default video mode   Jan Luebbe
• [PATCH] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH] Fix a panic in crypto hash calculations due to uninitialized variable.   Krzysztof Halasa
• [PATCH] Fix sha224sum panic by registering SHA224 hash name.   Krzysztof Halasa
• [PATCH] Fix sha224sum panic by registering SHA224 hash name.   Sascha Hauer
• [PATCH] Fix SHA224 to produce 28 bytes of hash (instead of 32).   Krzysztof Halasa
• [PATCH] fs/devfs.c: disallow write and erase if a partition is read-only   Jan Luebbe
• [PATCH] fs/devfs.c: disallow write and erase if a partition is read-only   Sascha Hauer
• [PATCH] fs: Fix file create bug when parent is not a directory   Sascha Hauer
• [PATCH] fs tftp: Fix short file transfers   Sascha Hauer
• [PATCH] i.MX clko: Checking for clko-line properly   Alexander Shiyan
• [PATCH] i.MX clko: Checking for clko-line properly   Sascha Hauer
• [PATCH] Initial BeagleBone support for second stage   Jan Luebbe
• [PATCH] Makefile: echo size check error to stderr   Sascha Hauer
• [PATCH] MIPS: XBurst: fix compiler warnings in reset-jz4750.c   Antony Pavlov
• [PATCH] MIPS: XBurst: fix compiler warnings in reset-jz4750.c   Sascha Hauer
• [PATCH] mmuinfo: add a command do display the result of virtual to physical translation   Jan Luebbe
• [PATCH] mmuinfo: add a command do display the result of virtual to physical translation   Sascha Hauer
• [PATCH] more dma fixes   Sascha Hauer
• [PATCH] mtd nand: mxs: add missing include for mxs_reset_block   Marc Kleine-Budde
• [PATCH] mtd nand: mxs: add missing include for mxs_reset_block   Sascha Hauer
• [PATCH] mxs NAND support   Sascha Hauer
• [PATCH] openrisc: fix build due to redefined phys_size_t   Sascha Hauer
• [PATCH] PCM038: Added support for boot from NOR-flash   Alexander Shiyan
• [PATCH] PCM038: Added support for boot from NOR-flash   Sascha Hauer
• [PATCH] poweroff: fix cmd_poweroff() arguments type   Antony Pavlov
• [PATCH] poweroff: fix cmd_poweroff() arguments type   Sascha Hauer
• [PATCH] print out resource_size_t correctly   Sascha Hauer
• [PATCH] provide ffs and __ashrdi3 for all architectures   Sascha Hauer
• [PATCH] remove dead rarpboot command   Sascha Hauer
• [PATCH] resource: store 'end' instead of 'size' in struct resource   Sascha Hauer
• [PATCH] sandbox: fix 64bit build   Sascha Hauer
• [PATCH] scripts/mkublheader: add program to produce an UBL image header   Jan Luebbe
• [PATCH] some small binary size improvement patches   Sascha Hauer
• [PATCH] sparse fixes   Sascha Hauer
• [PATCH] Unused files removed   Alexander Shiyan
• [PATCH] video/s3c24xx.c: fix doxygen comment for s3cfb_activate_var()   Antony Pavlov
• [PATCH] x86 linux16 command: Add missing include   Sascha Hauer
• [PATCH RFC] spi: add support for dual and quad IO modes   Johannes Stezenbach
• [PATCH RFC] spi: add support for dual and quad IO modes   Sascha Hauer
• [PATCH RFC] spi: add support for dual and quad IO modes   Johannes Stezenbach
• [PATCH v2 0/5] MIPS: XBurst: fix the JZ4755's clocksource   Antony Pavlov
• [PATCH v2 0/5] rewritten memtest command   Sascha Hauer
• [PATCH v2 0/6] fix dma memory allocations, add dma_alloc/dma_free   Marc Kleine-Budde
• [PATCH V2 0/8] arm: mxs: add ocotp write support   Wolfram Sang
• [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Antony Pavlov
• [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Sascha Hauer
• [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Sascha Hauer
• [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Antony Pavlov
• [PATCH v2 1/5] byteorder: fix {BIG,LITTLE}_ENDIAN defines   Sascha Hauer
• [PATCH v2 1/6] ARM mmu: don't use CONFIG_MMU to disable mmu code, there are static inline versions   Marc Kleine-Budde
• [PATCH V2 1/8] arm: mxs: make get_hclk result useable for upcoming set_hclk   Wolfram Sang
• [PATCH v2 2/5] byteorder: add sanity check   Antony Pavlov
• [PATCH v2 2/6] blackfin, mips, openrisc, ppc, sandbox, x86: add generic dma_alloc, dma_free inlines   Marc Kleine-Budde
• [PATCH V2 2/8] arm: mxs: add imx_set_hclk   Wolfram Sang
• [PATCH v2 3/5] clocksource: move the NSEC_PER_SEC constant to common header   Antony Pavlov
• [PATCH v2 3/5] clocksource: move the NSEC_PER_SEC constant to common header   Sascha Hauer
• [PATCH v2 3/6] nios: add dma_alloc, asm/dma.h   Marc Kleine-Budde
• [PATCH V2 3/8] arm: mxs: refactor access to power domain   Wolfram Sang
• [PATCH v2 4/5] MIPS: XBurst: fix the JZ4755's clocksource input frequency value   Antony Pavlov
• [PATCH v2 4/6] ARM mmu: add dma_alloc   Marc Kleine-Budde
• [PATCH V2 4/8] arm: mxs: add POWER_BASE for MX28, too   Wolfram Sang
• [PATCH v2 5/5] MIPS: XBurst: use clocks_calc_mult_shift() for JZ4755's clocksource   Antony Pavlov
• [PATCH v2 5/6] USB gadget fsl: request cacheline aligned buffer   Marc Kleine-Budde
• [PATCH V2 5/8] arm: mxs: add functions to get/set vddio   Wolfram Sang
• [PATCH v2 6/6] USB gadget: Fix dma memory allocations   Marc Kleine-Budde
• [PATCH V2 6/8] arm: mxs: refactor timeout routine for ocotp   Wolfram Sang
• [PATCH V2 7/8] arm: mxs: use consistent naming for #defines for ocotp   Wolfram Sang
• [PATCH V2 8/8] arm: mxs: add write support for ocotp   Wolfram Sang
• [PATCHv2] Add a simple watchdog 'framework' to Barebox   Juergen Beisert
• [PATCHv2] ARM/MXS: free the watchdog from acting as a system reset source on demand   Juergen Beisert
• [PATCHv2] ARM/MXS: free the watchdog from acting as a system reset source on demand   Sascha Hauer
• [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK   Wolfram Sang
• [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK   Sascha Hauer
• [PATCH V2] arm: mxs: get MAC from OCOTP for MX28EVK   Wolfram Sang
• [PATCH v2] drivers/net: add designware driver   Johannes Stezenbach
• [PATCH v2] drivers/net: add designware driver   Sascha Hauer
• [PATCHv2] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH v2] mmuinfo: add a command do display the result of virtual to physical translation   Jan Luebbe
• [PATCH v2] mmuinfo: add a command do display the result of virtual to physical translation   Sascha Hauer
• [PATCHv3] Add a simple watchdog 'framework' to Barebox   Juergen Beisert
• [PATCHv4] Add a simple watchdog 'framework' to Barebox   Juergen Beisert
• [RFC] README: fix the directory layout section   Antony Pavlov
• add 'poweroff' support   Antony Pavlov
• add 'poweroff' support   Sascha Hauer
• Add basic support for the OMAP-L138/DA850   Jan Luebbe
• Add basic support for the OMAP-L138/DA850   Yegor Yefremov
• Add basic support for the OMAP-L138/DA850   Jan Lübbe
• Add basic support for the OMAP-L138/DA850   Yegor Yefremov
• Booting mx25 based device from SD and NOR   Roberto Nibali
• Booting mx25 based device from SD and NOR   Sascha Hauer
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Peter Kuennemann at Crane-Soft
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Sascha Hauer
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Peter Kuennemann at Crane-Soft
• Booting PhyTec PCM043/IMX35 from USB/SD-Card   Sascha Hauer
• byteorder problem   Antony Pavlov
• defenv-2 updates   Sascha Hauer
• Enquiry   Yao yunjie
• How should a new internally developed board be handled?   Jerry Kirk
• How should a new internally developed board be handled?   Jerry Kirk
• How to start barebox on Freescale iMX28 EVK   Maxime Ripard
• How to start barebox on Freescale iMX28 EVK   Maxime Ripard
• How to start barebox on Freescale iMX28 EVK   Sascha Hauer
• How to start barebox on Freescale iMX28 EVK   Maxime Ripard
• i.MX23/i.MX28, software reset feature   Juergen Beisert
• i.MX23/i.MX28, software reset feature   Sascha Hauer
• inquire   knaqbgs
• is errno supposed to be positive or negative?   Uwe Kleine-König
• is errno supposed to be positive or negative?   Sascha Hauer
• is errno supposed to be positive or negative?   Uwe Kleine-König
• is errno supposed to be positive or negative?   Sascha Hauer
• Is Intel/Marvell PXA really ARMv4?   Krzysztof Halasa
• Is Intel/Marvell PXA really ARMv4?   Robert Jarzmik
• Loading Cpio (gz) image as rootfs   Benoit RAT
• Loading Cpio (gz) image as rootfs   Benoit RAT
• Loading Cpio (gz) image as rootfs   Jean-Christophe PLAGNIOL-VILLARD
• make fails with barebox   FQ | Joan Carles Abelaira
• make fails with barebox   Sascha Hauer
• make fails with barebox   FQ | Joan Carles Abelaira
• Re[2]: make fails with barebox   Alexander Shiyan
• make fails with barebox   FQ | Joan Carles Abelaira
• Re[2]: make fails with barebox   Alexander Shiyan
• make fails with barebox   FQ | Joan Carles Abelaira
• menu autodisplay does not work   Benoit RAT
• NOR boot support for barebox on the mini2440   André Lochotzke
• NOR boot support for barebox on the mini2440   André Lochotzke
• NOR boot support for barebox on the mini2440   Sascha Hauer
• Nowa wiadomość   DARIUSZ TRZASKA
• POE watchdog switch for IP cameras   PingBrother Networking
• Problem copying from NFS to SD card (crash & reboot)   gpontis at spamcop.net
• Problem with loadenv from /dev/env0   Benoit RAT
• Problem with loadenv from /dev/env0   Sascha Hauer
• Re: Problem with loadenv from /dev/env0   Alexander Shiyan
• Problem with loadenv from /dev/env0   Benoit RAT
• Problem with loadenv from /dev/env0   Benoit RAT
• Regression for the Beagle Board   Jan Luebbe
• Regression for the Beagle Board   Jan Luebbe
• SPI chip select problem   Antony Pavlov
• SPI chip select problem   Johannes Stezenbach
• SPI chip select problem   Antony Pavlov
• SPI chip select problem   Johannes Stezenbach
• UnCorrectable RS-ECC Error   Gabriel Tisan
• v2012.06.0   Sascha Hauer

Last message date: Fri Jun 29 23:56:01 EDT 2012
Archived on: Fri Jun 29 23:55:00 EDT 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...