[PATCH v2] mmuinfo: add a command do display the result of virtual to physical translation
Sascha Hauer
s.hauer at pengutronix.de
Mon Jun 25 03:09:42 EDT 2012
On Fri, Jun 22, 2012 at 11:02:05AM +0200, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu at pengutronix.de>
> ---
> arch/arm/Kconfig | 10 ++++-
> arch/arm/cpu/Makefile | 1 +
> arch/arm/cpu/mmuinfo.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 121 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/cpu/mmuinfo.c
Applied, thanks
Sascha
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 8a4e1a2..2f35738 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -123,7 +123,15 @@ config CMD_ARM_CPUINFO
> default y
> help
> Say yes here to get a cpuinfo command to show some
> - information about the cp15 registers
> + CPU information using the cp15 registers
> +
> +config CMD_ARM_MMUINFO
> + bool "mmuinfo command"
> + depends on CPU_V7
> + default n
> + help
> + Say yes here to get a mmuinfo command to show some
> + MMU and cache information using the cp15 registers
>
> config CPU_V7_DCACHE_SKIP
> bool "Skip DCache Invalidate"
> diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> index e30ae1c..93a34a9 100644
> --- a/arch/arm/cpu/Makefile
> +++ b/arch/arm/cpu/Makefile
> @@ -7,6 +7,7 @@ obj-y += start.o
> # Any variants can be called as start-armxyz.S
> #
> obj-$(CONFIG_CMD_ARM_CPUINFO) += cpuinfo.o
> +obj-$(CONFIG_CMD_ARM_MMUINFO) += mmuinfo.o
> obj-$(CONFIG_MMU) += mmu.o
> obj-$(CONFIG_CPU_32v4T) += cache-armv4.o
> obj-$(CONFIG_CPU_32v5) += cache-armv5.o
> diff --git a/arch/arm/cpu/mmuinfo.c b/arch/arm/cpu/mmuinfo.c
> new file mode 100644
> index 0000000..6bea34e
> --- /dev/null
> +++ b/arch/arm/cpu/mmuinfo.c
> @@ -0,0 +1,111 @@
> +/*
> + * mmuinfo.c - Show MMU/cache information from cp15 registers
> + *
> + * Copyright (c) Jan Luebbe <j.luebbe at pengutronix.de>, Pengutronix
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +
> +static char *inner_attr[] = {
> + "0b000 Non-cacheable",
> + "0b001 Strongly-ordered",
> + "0b010 (reserved)",
> + "0b011 Device",
> + "0b100 (reserved)",
> + "0b101 Write-Back, Write-Allocate",
> + "0b110 Write-Through",
> + "0b111 Write-Back, no Write-Allocate",
> +};
> +
> +static char *outer_attr[] = {
> + "0b00 Non-cacheable",
> + "0b01 Write-Back, Write-Allocate",
> + "0b10 Write-Through, no Write-Allocate",
> + "0b11 Write-Back, no Write-Allocate",
> +};
> +
> +static void decode_par(unsigned long par)
> +{
> + printf(" Physical Address [31:12]: 0x%08lx\n", par & 0xFFFFF000);
> + printf(" Reserved [11]: 0x%lx\n", (par >> 11) & 0x1);
> + printf(" Not Outer Shareable [10]: 0x%lx\n", (par >> 10) & 0x1);
> + printf(" Non-Secure [9]: 0x%lx\n", (par >> 9) & 0x1);
> + printf(" Impl. def. [8]: 0x%lx\n", (par >> 8) & 0x1);
> + printf(" Shareable [7]: 0x%lx\n", (par >> 7) & 0x1);
> + printf(" Inner mem. attr. [6:4]: 0x%lx (%s)\n", (par >> 4) & 0x7,
> + inner_attr[(par >> 4) & 0x7]);
> + printf(" Outer mem. attr. [3:2]: 0x%lx (%s)\n", (par >> 2) & 0x3,
> + outer_attr[(par >> 2) & 0x3]);
> + printf(" SuperSection [1]: 0x%lx\n", (par >> 1) & 0x1);
> + printf(" Failure [0]: 0x%lx\n", (par >> 0) & 0x1);
> +}
> +
> +static int do_mmuinfo(int argc, char *argv[])
> +{
> + unsigned long addr = 0, priv_read, priv_write;
> +
> + if (argc < 2)
> + return COMMAND_ERROR_USAGE;
> +
> + addr = strtoul_suffix(argv[1], NULL, 0);
> +
> + __asm__ __volatile__(
> + "mcr p15, 0, %0, c7, c8, 0 @ write VA to PA translation (priv read)\n"
> + :
> + : "r" (addr)
> + : "memory");
> +
> + __asm__ __volatile__(
> + "mrc p15, 0, %0, c7, c4, 0 @ read PAR\n"
> + : "=r" (priv_read)
> + :
> + : "memory");
> +
> + __asm__ __volatile__(
> + "mcr p15, 0, %0, c7, c8, 1 @ write VA to PA translation (priv write)\n"
> + :
> + : "r" (addr)
> + : "memory");
> +
> + __asm__ __volatile__(
> + "mrc p15, 0, %0, c7, c4, 0 @ read PAR\n"
> + : "=r" (priv_write)
> + :
> + : "memory");
> +
> + printf("PAR result for 0x%08lx: \n", addr);
> + printf(" privileged read: 0x%08lx\n", priv_read);
> + decode_par(priv_read);
> + printf(" privileged write: 0x%08lx\n", priv_write);
> + decode_par(priv_write);
> +
> + return 0;
> +}
> +
> +BAREBOX_CMD_HELP_START(mmuinfo)
> +BAREBOX_CMD_HELP_USAGE("mmuinfo <address>\n")
> +BAREBOX_CMD_HELP_SHORT("Show MMU/cache information for an address.\n")
> +BAREBOX_CMD_HELP_END
> +
> +BAREBOX_CMD_START(mmuinfo)
> + .cmd = do_mmuinfo,
> + .usage = "mmuinfo <address>",
> + BAREBOX_CMD_HELP(cmd_mmuinfo_help)
> +BAREBOX_CMD_END
> --
> 1.7.10
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list