[PATCH 0/6] misc ethernet fixes and new driver

[Johannes Stezenbach]

Hi,

I ported the designware ethernet driver from u-boot, it
only required minor changes and worked right away.
Since my hw has 1G ethernet I added support for this,
although speed is not so important in a boot loader it seemed
easier than to reconfigure the PHY for 100Mbit.

Patches 4 and 5 may be a bit controversial.  The motivation
for patch 4 is that took me some head scratching to get
debug read/write on PHY regs correct since md and mw worked
against my intuition on /dev/phy0.
The string in eth_set_ethaddr() confused me to think a string
would be passed to ->set_ethaddr().  Changing "unsigned char *adr"
to "u8 adr[6]" does not change the generated code but is IMHO
harder to misunderstand.


Johannes

 drivers/net/Kconfig      |   11 ++
 drivers/net/Makefile     |    1 +
 drivers/net/designware.c |  433 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/designware.h |  230 ++++++++++++++++++++++++
 drivers/net/miidev.c     |   72 ++++++--
 include/miidev.h         |    4 +
 include/net.h            |    8 +-
 include/net/designware.h |    9 +
 net/eth.c                |    2 +-
 net/net.c                |    4 +-
 10 files changed, 752 insertions(+), 22 deletions(-)