Problem with loadenv from /dev/env0

[Benoit RAT]

@alexander:

wrs-02:0B:AD:C0:FF:EE# saveenv
saving environment
Skipping bad block at 0x00000000
Skipping bad block at 0x00020000
Skipping bad block at 0x00040000
Skipping bad block at 0x00060000
Skipping bad block at 0x00080000
Skipping bad block at 0x000a0000
Skipping bad block at 0x000c0000

then I reboot

read: No error

running /env/bin/init...

not found


--
 <http://www.sevensols.com/>  <http://www.sevensecurity.es>

*Benoit RAT LAMY*

Engineer (Sw) \ Ingeniero (Sw)

fix. *(+34) 958 285 024*

cel. *(+34) 617 989 123*

e-mail: benoit at sevensols.com

*www.sevensols.com / **www.sevensecurity.es*

_________________________________

*C/ Baza, parcela 19 Nave 3  \ Polígono Ind. Juncaril \*

*18210 - PELIGROS - GRANADA –SPAIN*



On Mon, Jun 11, 2012 at 1:59 PM, Benoit RAT <benoit at sevensols.com> wrote:

> Sorry I forgot,
>
> It is based on pm9g45 board
>
>
> --
>  <http://www.sevensols.com/>  <http://www.sevensecurity.es>
>
> *Benoit RAT LAMY*
>
> Engineer (Sw) \ Ingeniero (Sw)
>
> fix. *(+34) 958 285 024*
>
> cel. *(+34) 617 989 123*
>
> e-mail: benoit at sevensols.com
>
> *www.sevensols.com / **www.sevensecurity.es*
>
> _________________________________
>
> *C/ Baza, parcela 19 Nave 3  \ Polígono Ind. Juncaril \*
>
> *18210 - PELIGROS - GRANADA –SPAIN*
>
>
>
> On Mon, Jun 11, 2012 at 1:57 PM, Sascha Hauer <s.hauer at pengutronix.de>wrote:
>
>> On Mon, Jun 11, 2012 at 01:53:13PM +0200, Benoit RAT wrote:
>> > Hello,
>> >
>> > I want to recover some parameters from my NAND flash by using saveenv
>> and
>> > loadenv but It does not work:
>> >
>> > First I have used a big env0 partition to be sure bad blocks don't
>> bother
>> > me.
>> >
>> >  devfs_add_partition("nand0", 0x00000, 0xF0000, PARTITION_FIXED,
>> "env_raw");
>> > > dev_add_bb_dev("env_raw", "env0");
>> >
>> >
>> > Then I try to edit,save & load /env/config
>> >
>> > wrs-02:0B:AD:C0:FF:EE# edit /env/config
>> >
>> > Then I change the eth0.addr
>> >
>> > eth0.ethaddr=72:0B:AD:C0:FF:EE
>> > > PS1="wrs-$eth0.ethaddr# "
>> >
>> >
>> > Ctrl+D
>> >
>> > wrs-02:0B:AD:C0:FF:EE# . /env/config
>> > wrs-72:0B:AD:C0:FF:EE# saveenv
>> > saving environment
>> > wrs-72:0B:AD:C0:FF:EE# loadenv
>> > loading environment from /dev/env0
>> > err -74
>> > err -74
>> > wrong crc on env
>>
>> What hardware was this again?
>>
>> Sascha
>>
>> --
>> Pengutronix e.K.                           |                             |
>> Industrial Linux Solutions                 | http://www.pengutronix.de/ |
>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
>>  |
>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555|
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20120611/d1f73d48/attachment-0001.html>