Problem with loadenv from /dev/env0

[Benoit RAT]

Sorry I forgot,

It is based on pm9g45 board

--
 <http://www.sevensols.com/>  <http://www.sevensecurity.es>

*Benoit RAT LAMY*

Engineer (Sw) \ Ingeniero (Sw)

fix. *(+34) 958 285 024*

cel. *(+34) 617 989 123*

e-mail: benoit at sevensols.com

*www.sevensols.com / **www.sevensecurity.es*

_________________________________

*C/ Baza, parcela 19 Nave 3  \ Polígono Ind. Juncaril \*

*18210 - PELIGROS - GRANADA –SPAIN*



On Mon, Jun 11, 2012 at 1:57 PM, Sascha Hauer <s.hauer at pengutronix.de>wrote:

> On Mon, Jun 11, 2012 at 01:53:13PM +0200, Benoit RAT wrote:
> > Hello,
> >
> > I want to recover some parameters from my NAND flash by using saveenv and
> > loadenv but It does not work:
> >
> > First I have used a big env0 partition to be sure bad blocks don't bother
> > me.
> >
> >  devfs_add_partition("nand0", 0x00000, 0xF0000, PARTITION_FIXED,
> "env_raw");
> > > dev_add_bb_dev("env_raw", "env0");
> >
> >
> > Then I try to edit,save & load /env/config
> >
> > wrs-02:0B:AD:C0:FF:EE# edit /env/config
> >
> > Then I change the eth0.addr
> >
> > eth0.ethaddr=72:0B:AD:C0:FF:EE
> > > PS1="wrs-$eth0.ethaddr# "
> >
> >
> > Ctrl+D
> >
> > wrs-02:0B:AD:C0:FF:EE# . /env/config
> > wrs-72:0B:AD:C0:FF:EE# saveenv
> > saving environment
> > wrs-72:0B:AD:C0:FF:EE# loadenv
> > loading environment from /dev/env0
> > err -74
> > err -74
> > wrong crc on env
>
> What hardware was this again?
>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20120611/25eaa03a/attachment.html>