[PATCH] ARM mxs: Clear USB boot mode during startup

Juergen Beisert jbe at pengutronix.de
Fri Jun 29 09:07:37 EDT 2012


Sascha Hauer wrote:
> When the i.MX28 boots from USB, the ROM code sets this bit. When
> after a reset the ROM code detects that this bit is set it will
> boot from USB again. This means that if we boot once from USB the
> chip will continue to boot from USB until the next power cycle.

And if the RTC has a battery it will boot from USB forever...

> [...]

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |



More information about the barebox mailing list