Add basic support for the OMAP-L138/DA850

[Yegor Yefremov]

On Tue, Jun 26, 2012 at 2:06 PM, Jan Lübbe <jlu at pengutronix.de> wrote:
> On Tue, 2012-06-26 at 13:59 +0200, Yegor Yefremov wrote:
>> > this series introduces a new ARM machine 'davinci' and adds support
>> > for UART, pin mux, power/clock, USB 1.1, NAND and SPI. Included is
>> > support for the HMI10 system which was used to develop and test this
>> > series.
>> >
>> > A second series adding ethernet (EMAC) and display (LCDC) support
>> > will be submitted when this is accepted.
>>
>> do you also have am335x system? AFAIK they both share same IP blocks.
>
> I have a BeagleBone, which uses an AM3359. So far it seems that it is
> closer to the OMAP3530 (beagleboard) than to the L138. The AM3505 shares
> the EMAC core with the L138 and the AM1808 should be nearly identical to
> the L138.
>
> I've got a simple hack which allows loading barebox on a BeagleBone from
> U-Boot's SPL (MUX and clocking is missing). You can use it to load a
> kernel from SD and boot it.

Could you share the hack? I would really like to see at least one of
our systems using barebox instead of u-boot.

Yegor