[PATCH 0/6] misc ethernet fixes and new driver

[Sascha Hauer]

On Mon, Jun 18, 2012 at 04:47:54PM +0200, Johannes Stezenbach wrote:
> Hi,
> 
> I ported the designware ethernet driver from u-boot, it
> only required minor changes and worked right away.
> Since my hw has 1G ethernet I added support for this,
> although speed is not so important in a boot loader it seemed
> easier than to reconfigure the PHY for 100Mbit.
> 
> Patches 4 and 5 may be a bit controversial.  The motivation
> for patch 4 is that took me some head scratching to get
> debug read/write on PHY regs correct since md and mw worked
> against my intuition on /dev/phy0.
> The string in eth_set_ethaddr() confused me to think a string
> would be passed to ->set_ethaddr().  Changing "unsigned char *adr"
> to "u8 adr[6]" does not change the generated code but is IMHO
> harder to misunderstand.

I applied this series up to 5/6 for now. Thanks, it's always nice to see code
cleanups.

Sascha

> 
> 
> Johannes
> 
>  drivers/net/Kconfig      |   11 ++
>  drivers/net/Makefile     |    1 +
>  drivers/net/designware.c |  433 ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/net/designware.h |  230 ++++++++++++++++++++++++
>  drivers/net/miidev.c     |   72 ++++++--
>  include/miidev.h         |    4 +
>  include/net.h            |    8 +-
>  include/net/designware.h |    9 +
>  net/eth.c                |    2 +-
>  net/net.c                |    4 +-
>  10 files changed, 752 insertions(+), 22 deletions(-)
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |