December 2011 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Thu Dec 1 09:26:36 EST 2011
Ending: Sat Dec 31 23:46:19 EST 2011
Messages: 387

• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Sascha Hauer
• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Sascha Hauer
• *** PROBABLY SPAM *** [PATCH 01/12] oftree: add of_fix_tree()   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 06/12] reimplement uImage code   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 06/12] reimplement uImage code   Sascha Hauer
• *** PROBABLY SPAM *** [PATCH 06/12] reimplement uImage code   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 06/12] reimplement uImage code   Sascha Hauer
• *** PROBABLY SPAM *** [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth   Sascha Hauer
• *** PROBABLY SPAM *** [PATCH v2 6/7] platform: add support for aizo dSS11   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** [PATCH v2 6/7] platform: add support for aizo dSS11   Sascha Hauer
• *** PROBABLY SPAM *** reimplement bootm support   Jean-Christophe PLAGNIOL-VILLARD
• *** PROBABLY SPAM *** reimplement bootm support   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] drivers/mtd: add a core   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] drivers/mtd: add a core   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] drivers/mtd: add a core   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] drivers/mtd: add a core   Sascha Hauer
• [PATCH 0/2] drivers/mtd: add a core   Robert Jarzmik
• [PATCH 0/2] PPC multiple architecture preparation   Renaud Barbier
• [PATCH 0/3] drivers/mtd: add support for docg3 chips   Robert Jarzmik
• [PATCH 0/4] At91 fix + usb udc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] mci s3c: remove unused code   Sascha Hauer
• [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] oftree: add of_fix_tree()   Sascha Hauer
• [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future   Juergen Beisert
• [PATCH 02/11] memory: do not try to reserve iomem on sandbox   Sascha Hauer
• [PATCH 02/12] ARM: import memcpy_from/toio and memset_io from linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/12] filetype: Add oftree detection   Sascha Hauer
• [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally   Juergen Beisert
• [PATCH 03/11] remove unused Kconfig variable HAS_CFI   Sascha Hauer
• [PATCH 03/12] mtd: atmel_nand: optimize read/write buffer functions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] uncompress: implement uncompress_fd_to_buf   Sascha Hauer
• [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates   Juergen Beisert
• [PATCH 04/11] fix underscore count in bss_start/bss_stop   Sascha Hauer
• [PATCH 04/12] atmel_nand: drop dead code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] libbb: add read_full/write_full functions   Sascha Hauer
• [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect NAND driver's usage   Juergen Beisert
• [PATCH 05/11] console_simple: fix compiler warning   Sascha Hauer
• [PATCH 05/12] ARM: call start_linux directly with initrd start/size and oftree   Sascha Hauer
• [PATCH 05/12] at91: add sram memory devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] MACH SAMSUNG/S3C: Parts of the SDHC driver can be shared in the S3C CPU family   Juergen Beisert
• [PATCH 06/11] net macb: remove unused variable   Sascha Hauer
• [PATCH 06/11] net macb: remove unused variable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/12] at91sam9263ek: add nor partition   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/12] reimplement uImage code   Sascha Hauer
• [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for   Juergen Beisert
• [PATCH 07/11] pxa: add type to Kconfig choice   Sascha Hauer
• [PATCH 07/12] at91sam9x: switch lowlevel init to c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] bootm: use new uimage code   Sascha Hauer
• [PATCH 07/14] bootm: handle initrds inline   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] bootm: handle initrds inline   Sascha Hauer
• [PATCH 07/14] bootm: handle initrds inline   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management   Juergen Beisert
• [PATCH 07/16] remove old zlib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] ft_build: temporarily disable bootm oftree support   Sascha Hauer
• [PATCH 08/12] add uimage command   Sascha Hauer
• [PATCH 08/12] at91/gpio: simplify resources   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family   Juergen Beisert
• [PATCH 09/11] arm eukrea boards: fix breakage after mach-types update   Sascha Hauer
• [PATCH 09/12] remove now obsolete iminfo command   Sascha Hauer
• [PATCH 09/12] usb-a926x: add led support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for   Juergen Beisert
• [PATCH 1/1] at91: fix reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv: use a compressed version when embedded in barebox   Sascha Hauer
• [PATCH 1/1] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] lib: remove re-introduce sum in commit 9135dd5f672e: initial libfdt support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mci: add the probe parameter if any error happened during the probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] poller_call: move from getc to is_timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] poller_call: move from getc to is_timeout   Sascha Hauer
• [PATCH 1/1] poller_call: move from getc to is_timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] add armlinux specific magicvar descriptions   Sascha Hauer
• [PATCH 1/2] Add OpenRISC arch   franck.jullien at gmail.com
• [PATCH 1/2] Add support for more recent Davicom DM9k devices   Juergen Beisert
• [PATCH 1/2] Add support for more recent Davicom DM9k devices   Sascha Hauer
• [PATCH 1/2] Add support for more recent Davicom DM9k devices   Juergen Beisert
• [PATCH 1/2] Add support for more recent Davicom DM9k devices   Juergen Beisert
• [PATCH 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).   Juergen Kilb
• [PATCH 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).   Sascha Hauer
• [PATCH 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).   Jürgen Kilb
• [PATCH 1/2] drivers/mtd: introduce {add,del}_nand_device   Robert Jarzmik
• [PATCH 1/2] imxfb: Add support for multiple video modes   Christian Hemp
• [PATCH 1/2] imxfb: Add support for multiple video modes   Sascha Hauer
• [PATCH 1/2] iomux-mx25: update SD1 settings   Eric Bénard
• [PATCH 1/2] Preparation stage to support multiple PPC architectures.   Renaud Barbier
• [PATCH 1/2] scripts/Makefile.lib: update compress cmd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] stringlist-functions: add sorted insert   Sascha Hauer
• [PATCH 1/2] uncompress: fix uncompress_buf usage   Sascha Hauer
• [PATCH 1/2] use format(__printf__, a, b) instead of formart(printf, a, b)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] use format(__printf__, a, b) instead of formart(printf, a, b)   Sascha Hauer
• [PATCH 1/2] use format(__printf__, a, b) instead of formart(printf, a, b)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] arm/mach-pxa: add MMC clock   Robert Jarzmik
• [PATCH 1/3] lib: add BCH encoding/decoding   Robert Jarzmik
• [PATCH 1/3] mci imx esdhc: enable i.MX53 fix for i.MX51 aswell   Sascha Hauer
• [PATCH 1/3] stringlist-functions: add sorted insert   Sascha Hauer
• [PATCH 1/3] usb-a926x: fix mem init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] usb-a926x: fix mem init   Sascha Hauer
• [PATCH 1/3] usb-a926x: fix mem init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] at91sam9263: fix mci clock   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] mx53: fix devid for imx53_add_mmc1/2   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] fix malloc space sizes   Sascha Hauer
• [PATCH 1/5] ppc pcm030: Fix device resource sizes   Sascha Hauer
• [PATCH 1/6] i.MX25: fix LD16 & LD17 iomux   Eric Bénard
• [PATCH 1/6] i.MX25: fix LD16 & LD17 iomux   Sascha Hauer
• [PATCH 1/7] remove unused watchdog header   Sascha Hauer
• [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init   Sascha Hauer
• [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init   Eric Bénard
• [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init   Sascha Hauer
• [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define   Sascha Hauer
• [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define   Sascha Hauer
• [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] remove now unused uImage code   Sascha Hauer
• [PATCH 10/12] usb-a926x: add dfu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver   Juergen Beisert
• [PATCH 11/11] x86: Fix linker script for magic vars   Sascha Hauer
• [PATCH 11/12] at91_udc: update vbus param only if updated   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/12] move code now only used in mkimage to mkimage   Sascha Hauer
• [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family   Juergen Beisert
• [PATCH 12/12] defaultenv: simplify boot   Sascha Hauer
• [PATCH 12/12] usb-a926x: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs   Juergen Beisert
• [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling   Juergen Beisert
• [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs   Juergen Beisert
• [PATCH 2/2] Add a generic board   franck.jullien at gmail.com
• [PATCH 2/2] auto-completion: add auto-completion for path files   Sascha Hauer
• [PATCH 2/2] Change the machine id/name to follow the phyCARD naming convention. This patch can be dropped if the phyCARD-A-L1 is updated in the official machine registry.   Juergen Kilb
• [PATCH 2/2] drivers/mtd: add a core mtd handler   Robert Jarzmik
• [PATCH 2/2] eukrea_cpuimx25: update defconfig   Eric Bénard
• [PATCH 2/2] eukrea_cpuimx25: update defconfig   Eric Bénard
• [PATCH 2/2] Make clock shift and mask configurable based on the processor type.   Renaud Barbier
• [PATCH 2/2] pca100: Add displays and framebuffer support.   Christian Hemp
• [PATCH 2/2] ramfs: increase chunk size to 8192 bytes   Sascha Hauer
• [PATCH 2/2] Remove the obsolet driver for the DM9000E ethernet device   Juergen Beisert
• [PATCH 2/2] Remove the obsolet driver for the DM9000E ethernet device   Juergen Beisert
• [PATCH 2/2] Remove the obsolet driver for the DM9000E ethernet device   Juergen Beisert
• [PATCH 2/2] stdio: convert __attribute__ ((format(printf, a, b))) to __printf(a, b)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] time command: Fix needed string length   Sascha Hauer
• [PATCH 2/2 v3] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm/mach-pxa: add mci_pxa2xx file   Robert Jarzmik
• [PATCH 2/3] ARM i.MX53: Adjust MMC clock frequencies to 200MHz   Sascha Hauer
• [PATCH 2/3] at91sam9260/9g20-ek: update nand support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] lib: add bitrev utility   Robert Jarzmik
• [PATCH 2/3] nandtest: add nandtest command   Sascha Hauer
• [PATCH 2/4] at91: add udc usb device controller support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] at91: add udc usb device controller support   Sascha Hauer
• [PATCH 2/4] imx-esdhc: add support of card detect   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] twl-core: add support for twl6030   Sascha Hauer
• [PATCH 2/4 V2] at91: add udc usb device controller support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] add resource management functions   Sascha Hauer
• [PATCH 2/5] pcm030: update defconfig   Sascha Hauer
• [PATCH 2/5] twlcore: rename twl4030 to twlcore driver   Sascha Hauer
• [PATCH 2/6] CPUIMX35: enable the watchdog clock asap   Eric Bénard
• [PATCH 2/7] remove unused keyboard.h file   Sascha Hauer
• [PATCH 2/9] ARM i.MX51: implement a imx51_lowlevel_init   Sascha Hauer
• [PATCH 3/3] at91sam9260/9g20-ek: add usb host, device and mci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] drivers/mci: add PXA host controller   Robert Jarzmik
• [PATCH 3/3] drivers/mci: add PXA host controller   Sascha Hauer
• [PATCH 3/3] drivers/mci: add PXA host controller   Robert Jarzmik
• [PATCH 3/3] drivers/mci: add PXA host controller   Sascha Hauer
• [PATCH 3/3] drivers/mtd: add docg3 chip   Robert Jarzmik
• [PATCH 3/3] mci imx-esdhc: do not overwrite probed host caps   Sascha Hauer
• [PATCH 3/4] at91: add at91_udc resource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91: add at91_udc resource   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] mx53 loco: update sd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] omap_hsmmc: setup mmc voltage on twl6030   Sascha Hauer
• [PATCH 3/5] add iomem command to show iomem usage   Sascha Hauer
• [PATCH 3/5] ppc pcm030: Move memory registration to mem_initcall   Sascha Hauer
• [PATCH 3/6] CPUIMX51: add ARM errata and enable L2 cache   Eric Bénard
• [PATCH 3/6] CPUIMX51: add ARM errata and enable L2 cache   Sascha Hauer
• [PATCH 3/7] ARM cpuinfo: decode more bits, use ARRAY_SIZE   Sascha Hauer
• [PATCH 3/7] at91sam9260_devices: properly set slot id   Michael Grzeschik
• [PATCH 3/9] ARM i.MX51 babbage: use generic lowlevel init function   Sascha Hauer
• [PATCH 4/4] imx: add mx53 SMD board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] usb-a926x: add usb device support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ppc: switch to libfdt based oftree implementation   Sascha Hauer
• [PATCH 4/5] ppc: switch to libfdt based oftree implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ppc: switch to libfdt based oftree implementation   Sascha Hauer
• [PATCH 4/5] register sdram as resources   Sascha Hauer
• [PATCH 4/6] CPUIMX51: fix environement   Eric Bénard
• [PATCH 4/7] ARM: remove unused icache command   Sascha Hauer
• [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth   Michael Grzeschik
• [PATCH 4/9] ARM eukrea i.MX51: use generic lowlevel init   Sascha Hauer
• [PATCH 5/5] implement resource management for platform devices   Sascha Hauer
• [PATCH 5/5] remove old ft_build support   Sascha Hauer
• [PATCH 5/6] CPUIMX51: configure SD1 iomux when ESDHC is enabled   Eric Bénard
• [PATCH 5/7] common.h: remove unused function declarations   Sascha Hauer
• [PATCH 5/9] ARM: update string functions from Linux Kernel   Sascha Hauer
• [PATCH 6/6] CPUIMX51: update defconfig   Eric Bénard
• [PATCH 6/7] cdev: pass flags to open function   Sascha Hauer
• [PATCH 6/9] ARM cache-armv7: use thumb-2 instructions where necessary   Sascha Hauer
• [PATCH 7/7] nand-bb: implement lseek in readonly mode   Sascha Hauer
• [PATCH 7/7] nand-bb: implement lseek in readonly mode   Robert Jarzmik
• [PATCH 7/7] nand-bb: implement lseek in readonly mode   Sascha Hauer
• [PATCH 7/7] nand-bb: implement lseek in readonly mode   Robert Jarzmik
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Peter Korsgaard
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Sascha Hauer
• [PATCH 7/9] ARM: move exception vectors away from start of binary   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] ARM: get runtime offset of board_init_lowlevel_return by using separate section   Sascha Hauer
• [PATCH 9/9] ARM: Allow to compile in thumb-2 mode   Sascha Hauer
• [PATCH] Add support for the more recent Davicom DM9000A and DM9000B   Juergen Beisert
• [PATCH] arch/arm: mmu: add map_io_range()   Robert Jarzmik
• [PATCH] ARM: add board support for Phytec phyCARD-M aka pca101   Sascha Hauer
• [PATCH] ARM: add board support for Phytec phyCARD-M aka pca101   Teresa Gamez
• [PATCH] ARM: add board support for Phytec phyCARD-M aka pca101   Sascha Hauer
• [PATCH] ARM: add board support for Phytec phyCARD-M aka pca101   Teresa Gamez
• [PATCH] ARM: pass -msoft-float   Sascha Hauer
• [PATCH] ARM i.MX27: initialize MAX   Sascha Hauer
• [PATCH] ARM i.MX27: initialize MAX   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM i.MX27: initialize MAX   Sascha Hauer
• [PATCH] ARM i.MX27: initialize MAX   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM i.MX27: initialize MAX   Sascha Hauer
• [PATCH] atmel_spi: add mesg->actual_length, so devices can use it for read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] command: flash: remove broken filename check   Wolfram Sang
• [PATCH] commands: add hexdump command   Robert Jarzmik
• [PATCH] commands: add hexdump command   Antony Pavlov
• [PATCH] commands: add hexdump command   Robert Jarzmik
• [PATCH] commands: really print BAREBOX_CMD_HELP_TEXT   Wolfram Sang
• [PATCH] compile (and warning) fixes for -next   Sascha Hauer
• [PATCH] crc exit with COMMAND_ERROR_USAGE   Jan Weitzel
• [PATCH] decompress_inflate.c: fix "no previous prototype for 'gunzip'" warning   Antony Pavlov
• [PATCH] drivers/mci: pxa fix clockrate   Robert Jarzmik
• [PATCH] drivers/mci: pxa read data performance boost   Robert Jarzmik
• [PATCH] drivers/mci: pxa writedata timeout   Robert Jarzmik
• [PATCH] eukrea_cpuimx35: update defconfig   Eric Bénard
• [PATCH] fix "no previous prototype for 'sbrk'" warning   Antony Pavlov
• [PATCH] fix cramfs support broken since zlib update   Sascha Hauer
• [PATCH] i.MX53 sdhc   Sascha Hauer
• [PATCH] make dos partition support default yes if we have disk partition support   Sascha Hauer
• [PATCH] make dos partition support default yes if we have disk partition support   Juergen Beisert
• [PATCH] MIPS: provide __bss_stop in linker script   Antony Pavlov
• [PATCH] mtd/core.c: fix MTDPGALG   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mtd/core.c: fix MTDPGALG   Robert Jarzmik
• [PATCH] mx53 update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mxs: add support for mx28-evk   Wolfram Sang
• [PATCH] mxs: add support for mx28-evk   Jürgen Kilb
• [PATCH] nand: drop some cruft   Wolfram Sang
• [PATCH] nand: drop some cruft   Robert Jarzmik
• [PATCH] nand: drop some cruft   Wolfram Sang
• [PATCH] nand_omap_bch_decoder: Fix up error detection   Teresa Gámez
• [PATCH] nand_omap_bch_decoder: Fix up error detection   Teresa Gamez
• [PATCH] nios2: remove one "_" from etext an stext   franck.jullien at gmail.com
• [PATCH] omap3: add register definitions for chip die ID   Daniel Mack
• [PATCH] pcm038: Updated NOR-Flash CS values   Teresa Gámez
• [PATCH] pcm038: Updated NOR-Flash CS values   Sascha Hauer
• [PATCH] Prepare to add more Samsung S3C CPUs to barebox   Juergen Beisert
• [PATCH] resources   Sascha Hauer
• [PATCH] Some trivial grammar/spelling fixes for main README file.   Robert P. J. Day
• [PATCH] uart drivers: use xzalloc instead of xmalloc   Sascha Hauer
• [PATCH] Update README to refer to newer location of example environment   Robert P. J. Day
• [PATCH] Update README to refer to newer location of example environment   Sascha Hauer
• [PATCH] usb/gadget: add special treatment for PXA cpus   Robert Jarzmik
• [PATCH V2 0/3] Add MSystems Disk-On-Chip G3 support   Robert Jarzmik
• [PATCH v2 0/7] platformsupport for aizo dSS11   Michael Grzeschik
• [PATCH V2 0/8] mtd framework rework   Robert Jarzmik
• [PATCH V2 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).   Juergen Kilb
• [PATCH V2 1/3] arm/mach-pxa: add MMC clock   Robert Jarzmik
• [PATCH V2 1/3] lib: add BCH encoding/decoding   Robert Jarzmik
• [PATCH v2 1/7] storage/usb.c: fix test_unit_ready   Michael Grzeschik
• [PATCH V2 1/8] drivers/mtd: move nand.c into core.c   Robert Jarzmik
• [PATCH v2 2/2] eukrea_cpuimx25: update defconfig   Eric Bénard
• [PATCH V2 2/3] arm/mach-pxa: add mci_pxa2xx file   Robert Jarzmik
• [PATCH V2 2/3] lib: add bitrev utility   Robert Jarzmik
• [PATCH v2 2/7] atmel_mci: check for device id we use to address the right slot   Michael Grzeschik
• [PATCH V2 2/8] drivers/mtd: cosmetic changes   Robert Jarzmik
• [PATCH V2 3/3] drivers/mci: add PXA host controller   Robert Jarzmik
• [PATCH V2 3/3] drivers/mtd: add docg3 chip   Robert Jarzmik
• [PATCH V2 3/8] drivers/mtd: transfer NAND notions to MTD core   Robert Jarzmik
• [PATCH V2 3/8] drivers/mtd: transfer NAND notions to MTD core   Sascha Hauer
• [PATCH V2 3/8] drivers/mtd: transfer NAND notions to MTD core   Robert Jarzmik
• [PATCH V2 3/8] drivers/mtd: transfer NAND notions to MTD core   Sascha Hauer
• [PATCH V2 4/8] drivers/mtd: recover NAND default device name "nand"   Robert Jarzmik
• [PATCH v2 5/7] arm: update mach-types   Michael Grzeschik
• [PATCH V2 5/8] drivers/mtd: fix core multiple MTD registrations   Robert Jarzmik
• [PATCH v2 6/7] platform: add support for aizo dSS11   Michael Grzeschik
• [PATCH V2 6/8] drivers/mtd: add mtd core hooks   Robert Jarzmik
• [PATCH v2 7/7] dss11: add defconfig   Michael Grzeschik
• [PATCH V2 7/8] mtd/drivers: split mtd mtdoob devices   Robert Jarzmik
• [PATCH V2 7/8] mtd/drivers: split mtd mtdoob devices   Sascha Hauer
• [PATCH V2 7/8] mtd/drivers: split mtd mtdoob devices   Robert Jarzmik
• [PATCH V2 8/8] drivers/mtd: add the mtdraw device (data+oob)   Robert Jarzmik
• [PATCH v2] Add support for the more recent Davicom DM9000A and DM9000   Juergen Beisert
• [PATCH v2] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth   Michael Grzeschik
• [PATCH v2] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth   Michael Grzeschik
• [PATCH v2] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] defaultenv: use a compressed version when embedded in barebox   Eric Bénard
• [PATCH v2] defaultenv: use a compressed version when embedded in barebox   Sascha Hauer
• [PATCH v2] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] omap3: add register definitions for chip die ID   Daniel Mack
• [PATCH v2] sanbox: add linux_execve and linux_exec command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V3 0/8] mtd framework rework   Robert Jarzmik
• [PATCH V3 0/8] mtd framework rework   Sascha Hauer
• [PATCH V3 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support   Robert Jarzmik
• [PATCH V3 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support   Sascha Hauer
• [PATCH V3 1/8] drivers/mtd: move nand.c into core.c   Robert Jarzmik
• [PATCH V3 2/3] drivers/video: add PXA framebuffer support   Robert Jarzmik
• [PATCH V3 2/3] drivers/video: add PXA framebuffer support   Sascha Hauer
• [PATCH V3 2/3] drivers/video: add PXA framebuffer support   Robert Jarzmik
• [PATCH V3 2/8] drivers/mtd: cosmetic changes   Robert Jarzmik
• [PATCH V3 2/8] drivers/mtd: cosmetic changes   Sascha Hauer
• [PATCH V3 2/8] drivers/mtd: cosmetic changes   Robert Jarzmik
• [PATCH V3 3/3] arm/mach-pxa: add mioa701 board   Robert Jarzmik
• [PATCH V3 3/3] arm/mach-pxa: add mioa701 board   Sascha Hauer
• [PATCH V3 3/3] arm/mach-pxa: add mioa701 board   robert.jarzmik at free.fr
• [PATCH V3 3/3] arm/mach-pxa: add mioa701 board   Sascha Hauer
• [PATCH V3 3/3] arm/mach-pxa: add mioa701 board   robert.jarzmik at free.fr
• [PATCH V3 3/8] drivers/mtd: transfer NAND notions to MTD core   Robert Jarzmik
• [PATCH V3 3/8] drivers/mtd: transfer NAND notions to MTD core   Sascha Hauer
• [PATCH V3 4/8] drivers/mtd: recover NAND default device name "nand"   Robert Jarzmik
• [PATCH V3 5/8] drivers/mtd: fix core multiple MTD registrations   Robert Jarzmik
• [PATCH V3 6/8] drivers/mtd: add mtd core hooks   Robert Jarzmik
• [PATCH V3 7/8] drivers/mtd: split mtd mtdoob devices   Robert Jarzmik
• [PATCH V3 7/8] drivers/mtd: split mtd mtdoob devices   Sascha Hauer
• [PATCH V3 7/8] drivers/mtd: split mtd mtdoob devices   Robert Jarzmik
• [PATCH V3 8/8] drivers/mtd: add the mtdraw device (data+oob)   Robert Jarzmik
• [PATCH v3] Add support for the more recent Davicom DM9000A and DM9000   Juergen Beisert
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Robert Jarzmik
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Sascha Hauer
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Robert Jarzmik
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Robert Jarzmik
• [PATCH V4 1/7] drivers/mtd: move nand.c into core.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4 2/7] drivers/mtd: cosmetic changes   Robert Jarzmik
• [PATCH V4 3/7] drivers/mtd: transfer NAND notions to MTD core   Robert Jarzmik
• [PATCH V4 4/7] drivers/mtd: fix core multiple MTD registrations   Robert Jarzmik
• [PATCH V4 5/7] drivers/mtd: add mtd core hooks   Robert Jarzmik
• [PATCH V4 6/7] drivers/mtd: split mtd mtdoob devices   Robert Jarzmik
• [PATCH V4 7/7] drivers/mtd: add the mtdraw device (data+oob)   Robert Jarzmik
• [re-PATCH 1/1] sanbox: add linux_execve and linux_exec command   Jean-Christophe PLAGNIOL-VILLARD
• [re-PATCH 1/1] sanbox: add linux_execve and linux_exec command   Sascha Hauer
• [RESEND PATCH 1/2] scripts/Makefile.lib: update compress cmd support   Jean-Christophe PLAGNIOL-VILLARD
• [RESEND PATCH 2/2] defaultenv: use a compressed version when embedded in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] net: dhcp: make serverip a magicvar   Wolfram Sang
• [RFC PATCH 0/3] add tlsf memory allocator   Antony Pavlov
• [RFC PATCH 0/3] add tlsf memory allocator   Sascha Hauer
• [RFC PATCH 0/3] add tlsf memory allocator   Sascha Hauer
• [RFC PATCH 0/3] add tlsf memory allocator   Antony Pavlov
• [RFC PATCH 1/3] import TLSF 2.0 from http://tlsf.baisoku.org/tlsf-2.0.zip   Antony Pavlov
• [RFC PATCH 1/3] import TLSF 2.0 from http://tlsf.baisoku.org/tlsf-2.0.zip   Sascha Hauer
• [RFC PATCH 2/3] adapt tlsf for barebox   Antony Pavlov
• [RFC PATCH 3/3] add tlsf-based malloc implementation   Antony Pavlov
• [RFC PATCH 3/3] add tlsf-based malloc implementation   Sascha Hauer
• Adding New comand   G Rajender
• ARM, MMU and IO space mapping   Sascha Hauer
• ARM, MMU and IO space mapping   Marc Kleine-Budde
• ARM, MMU and IO space mapping   Robert Jarzmik
• AT91: Pull   Jean-Christophe PLAGNIOL-VILLARD
• barebox build error : WATCHDOG_RESET   Robert Jarzmik
• barebox build error : WATCHDOG_RESET   Sascha Hauer
• barebox support for 4460-based pandaboard ES?   Robert P. J. Day
• cramfs broken on -next   Sascha Hauer
• FAT filesystem write and long names stability   Robert Jarzmik
• FAT filesystem write and long names stability   Franck JULLIEN
• FAT filesystem write and long names stability   Robert Jarzmik
• FAT filesystem write and long names stability   Franck JULLIEN
• FAT filesystem write and long names stability   Robert Jarzmik
• FAT filesystem write and long names stability   Sascha Hauer
• FAT filesystem write and long names stability   Robert Jarzmik
• FAT filesystem write and long names stability   Robert Jarzmik
• FAT filesystem write and long names stability   Sascha Hauer
• FAT filesystem write and long names stability   Sascha Hauer
• Linker question   Franck JULLIEN
• Linker question   Sascha Hauer
• Linker question   Franck JULLIEN
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Sascha Hauer
• magicvar breaks tftp (or ramfs)   Eric Bénard
• magicvar breaks tftp (or ramfs)   Sascha Hauer
• misc patches   Sascha Hauer
• O seu site a um clique com o Joomla   tdkdigital
• ppc work   Sascha Hauer
• reimplement bootm support   Sascha Hauer
• Thumb-2 support   Sascha Hauer
• v2011.12.0   Sascha Hauer

Last message date: Sat Dec 31 23:46:19 EST 2011
Archived on: Sat Jan 14 09:46:10 EST 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...