[PATCH V3 3/3] arm/mach-pxa: add mioa701 board

[Sascha Hauer]

On Mon, Dec 05, 2011 at 11:49:23AM +0100, robert.jarzmik at free.fr wrote:
> ----- Mail original -----
> De: "Sascha Hauer" <s.hauer at pengutronix.de>
> On Sat, Dec 03, 2011 at 06:02:02PM +0100, Robert Jarzmik wrote:
> > Add Mitac MioA701 board initial support.
> > The support only provides basic boot and a console over USB
> > (serial gadget).
> 
> > This currently does not compile because mach/udc_pxa2xx.h is missing.
> > We could either remove the udc support or wait with your board support
> > until the udc driver is in the tree.
> I think we can safely wait for the UDC to reach the tree. The board support
> is still a new born, and there's no hurry in getting it merged.
> 
> > I'm fine with your udc driver, I was just waiting for the cache issues
> > to be resolved before applying it.
> Which cache issues ? I think I missed a mail in there ... I only have
> in mind the discussion about page 0 mapping for the MTD driver ... I
> must have missed something.

I thought the udc driver currently does not work with mmu enabled
because it does not have any dma operations.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |