[PATCH 03/11] remove unused Kconfig variable HAS_CFI
Sascha Hauer
s.hauer at pengutronix.de
Wed Dec 7 07:52:59 EST 2011
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 8 --------
drivers/nor/Kconfig | 3 ---
2 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 726920f..27bf386 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -182,7 +182,6 @@ config MACH_MX1ADS
config MACH_SCB9328
bool "Synertronixx scb9328"
select HAS_DM9000
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using the Synertronixx scb9328 board
@@ -201,7 +200,6 @@ choice
config MACH_IMX21ADS
bool "Freescale i.MX21ADS"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select HAS_CS8900
help
@@ -229,7 +227,6 @@ config MACH_EUKREA_CPUIMX25
config MACH_FREESCALE_MX25_3STACK
bool "Freescale MX25 3stack"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select I2C
select I2C_MC34704
@@ -257,7 +254,6 @@ choice
config MACH_EUKREA_CPUIMX27
bool "EUKREA CPUIMX27"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using Eukrea's CPUIMX27 equipped
@@ -265,7 +261,6 @@ config MACH_EUKREA_CPUIMX27
config MACH_IMX27ADS
bool "Freescale i.MX27ADS"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using the Freescale i.MX27ads board equipped
@@ -280,7 +275,6 @@ config MACH_PCA100
config MACH_PCM038
bool "phyCORE-i.MX27"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select SPI
select DRIVER_SPI_IMX
@@ -339,7 +333,6 @@ config MACH_EUKREA_CPUIMX35
config MACH_FREESCALE_MX35_3STACK
bool "Freescale MX35 3stack"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select I2C
select I2C_IMX
@@ -351,7 +344,6 @@ config MACH_FREESCALE_MX35_3STACK
config MACH_PCM043
bool "phyCORE-i.MX35"
- select HAS_CFI
select MACH_HAS_LOWLEVEL_INIT
select ARCH_HAS_L2X0
help
diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig
index 84ce0d0..8652d27 100644
--- a/drivers/nor/Kconfig
+++ b/drivers/nor/Kconfig
@@ -8,9 +8,6 @@ menuconfig DRIVER_CFI
if DRIVER_CFI
-config HAS_CFI
- bool
-
config DRIVER_CFI_INTEL
default y
depends on DRIVER_CFI
--
1.7.7.3
More information about the barebox
mailing list