[PATCH] ARM: add board support for Phytec phyCARD-M aka pca101
Sascha Hauer
s.hauer at pengutronix.de
Wed Dec 21 06:36:13 EST 2011
From: Teresa Gámez <t.gamez at phytec.de>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Teresa Gamez <t.gamez at phytec.de>
---
arch/arm/Makefile | 1 +
arch/arm/boards/phyCARD-M/Makefile | 2 +
arch/arm/boards/phyCARD-M/config.h | 6 +
arch/arm/boards/phyCARD-M/env/config | 59 +++++++
arch/arm/boards/phyCARD-M/lowlevel.c | 248 ++++++++++++++++++++++++++++++
arch/arm/boards/phyCARD-M/pca101.c | 276 ++++++++++++++++++++++++++++++++++
arch/arm/configs/pca101_defconfig | 67 ++++++++
arch/arm/mach-imx/Kconfig | 14 ++
8 files changed, 673 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boards/phyCARD-M/Makefile
create mode 100644 arch/arm/boards/phyCARD-M/config.h
create mode 100644 arch/arm/boards/phyCARD-M/env/config
create mode 100644 arch/arm/boards/phyCARD-M/lowlevel.c
create mode 100644 arch/arm/boards/phyCARD-M/pca101.c
create mode 100644 arch/arm/configs/pca101_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a3e12e6..fcb2f1a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -97,6 +97,7 @@ board-$(CONFIG_MACH_PCM037) := pcm037
board-$(CONFIG_MACH_PCM038) := pcm038
board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
+board-$(CONFIG_MACH_PCA101) := phyCARD-M
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
board-$(CONFIG_MACH_SCB9328) := scb9328
diff --git a/arch/arm/boards/phyCARD-M/Makefile b/arch/arm/boards/phyCARD-M/Makefile
new file mode 100644
index 0000000..4b983e7
--- /dev/null
+++ b/arch/arm/boards/phyCARD-M/Makefile
@@ -0,0 +1,2 @@
+obj-y += lowlevel.o
+obj-y += pca101.o
diff --git a/arch/arm/boards/phyCARD-M/config.h b/arch/arm/boards/phyCARD-M/config.h
new file mode 100644
index 0000000..5ede823
--- /dev/null
+++ b/arch/arm/boards/phyCARD-M/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MX35_HCLK_FREQ 24000000
+
+#endif
diff --git a/arch/arm/boards/phyCARD-M/env/config b/arch/arm/boards/phyCARD-M/env/config
new file mode 100644
index 0000000..1f00347
--- /dev/null
+++ b/arch/arm/boards/phyCARD-M/env/config
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+machine=pca101
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=192.168.3.11
+#eth0.netmask=255.255.255.0
+#eth0.gateway=192.168.3.10
+#eth0.serverip=192.168.3.10
+
+# can be either 'net' or 'nand'
+kernel_loc=nand
+# can be either 'net' or 'nand'
+rootfs_loc=nand
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-$machine.$rootfs_type
+
+kernelimage=uImage-$machine
+
+if [ -n $user ]; then
+ kernelimage="$user"-"$kernelimage"
+ nfsroot="$eth0.serverip:/home/$user/nfsroot/$machine"
+ rootfsimage="$user"-"$rootfsimage"
+else
+ nfsroot="$eth0.serverip:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+bootargs="console=ttymxc0,115200"
+
+#Displays
+bootargs="$bootargs video=mx3fb:Primeview-PD050VL1"
+#bootargs="$bootargs video=mx3fb:Primeview-PD035VL1"
+#bootargs="$bootargs video=mx3fb:Primeview-PD104SLF"
+#bootargs="$bootargs video=mx3fb:Primeview-PM070WL4"
+
+# safetytest display
+#bootargs="$bootargs video=mx3fb:ETM070001DH6 quiet"
+
+#USB OTG - Comment this out if you want to use USB OTG as host
+#bootargs="$bootargs pca101_otg_mode=host"
+
+bootargs="$bootargs lpj=2654208 quiet"
+
+nand_parts="512k(barebox)ro,512k(bareboxenv),5M(kernel),-(root)"
+rootfs_mtdblock_nand=3
+
+nand_device=mxc_nand
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/phyCARD-M/lowlevel.c b/arch/arm/boards/phyCARD-M/lowlevel.c
new file mode 100644
index 0000000..1d2cd97
--- /dev/null
+++ b/arch/arm/boards/phyCARD-M/lowlevel.c
@@ -0,0 +1,248 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#include <asm/barebox-arm.h>
+#include <asm-generic/memory_layout.h>
+#include <asm/system.h>
+#include <asm/cache-l2x0.h>
+
+#include <mach/imx-nand.h>
+#include <mach/imx-regs.h>
+#include <mach/imx-pll.h>
+#include <mach/esdctl.h>
+
+/* Assuming 24MHz input clock */
+#define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5))
+#define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1))
+#define PPCTL_PARAM_300 (IMX_PLL_PD(0) | IMX_PLL_MFD(3) | IMX_PLL_MFI(6) | IMX_PLL_MFN(1))
+
+#define IMX35_CHIP_REVISION_2_1 0x11
+
+#define CCM_PDR0_399 0x00011000
+#define CCM_PDR0_532 0x00001000
+
+#ifdef CONFIG_NAND_IMX_BOOT
+static void __bare_init __naked insdram(void)
+{
+ uint32_t r;
+
+ /* Speed up NAND controller by adjusting the NFC divider */
+ r = readl(IMX_CCM_BASE + CCM_PDR4);
+ r &= ~(0xf << 28);
+ r |= 0x1 << 28;
+ writel(r, IMX_CCM_BASE + CCM_PDR4);
+
+ /* setup a stack to be able to call imx_nand_load_image() */
+ r = STACK_BASE + STACK_SIZE - 12;
+ __asm__ __volatile__("mov sp, %0" : : "r"(r));
+
+ imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
+
+ board_init_lowlevel_return();
+}
+#endif
+
+#define ESDCTLVAL (ESDCTL0_ROW13 | ESDCTL0_COL10 | ESDCTL0_DSIZ_31_0 | \
+ ESDCTL0_REF8 | ESDCTL0_BL)
+#define ESDCFGVAL (ESDCFGx_tXP_2 | ESDCFGx_tRP_2 | ESDCFGx_tMRD_2 | ESDCFGx_tRAS_6 | \
+ ESDCFGx_tRRD_2 | ESDCFGx_tRCD_2 | \
+ ESDCFGx_tRC_16)
+
+static inline void phycard_setup_sdram(uint32_t base, uint32_t esdctl,
+ uint32_t esdcfg)
+{
+ uint32_t esdctlreg = ESDCTL0;
+ uint32_t esdcfgreg = ESDCFG0;
+
+ if (base != IMX_SDRAM_CS0) {
+ esdctlreg += 8;
+ esdcfgreg += 8;
+ }
+
+ esdctl |= ESDCTL0_SDE;
+
+ /* set timing paramters */
+ writel(esdcfg, esdcfgreg);
+ /* select Prechare-All mode */
+ writel(ESDCTL0_SMODE_PRECHARGE | esdctl, esdctlreg);
+ /* Prechare-All */
+ writel(0x12345678, base + 0x400);
+
+ /* select Load-Mode-Register mode */
+ writel(ESDCTL0_SMODE_LOAD_MODE | esdctl, esdctlreg);
+ /* Load reg EMR2 */
+ writeb(0xda, base + 0x04000000);
+ /* Load reg EMR3 */
+ writeb(0xda, base + 0x06000000);
+ /* Load reg EMR1 -- enable DLL */
+ writeb(0xda, base + 0x02000400);
+ /* Load reg MR -- reset DLL */
+ writeb(0xda, base + 0x00000333);
+
+ /* select Prechare-All mode */
+ writel(ESDCTL0_SMODE_PRECHARGE | esdctl, esdctlreg);
+ /* Prechare-All */
+ writel(0x12345678, base + 0x400);
+
+ /* select Manual-Refresh mode */
+ writel(ESDCTL0_SMODE_AUTO_REFRESH | esdctl, esdctlreg);
+ /* Manual-Refresh 2 times */
+ writel(0x87654321, base);
+ writel(0x87654321, base);
+
+ /* select Load-Mode-Register mode */
+ writel(ESDCTL0_SMODE_LOAD_MODE | esdctl, esdctlreg);
+ /* Load reg MR -- CL3, BL8, end DLL reset */
+ writeb(0xda, base + 0x233);
+ /* Load reg EMR1 -- OCD default */
+ writeb(0xda, base + 0x02000780);
+ writeb(0xda, base + 0x020007C0);
+ /* Load reg EMR1 -- OCD exit */
+ writeb(0xda, base + 0x02000400);
+ writeb(0xda, base + 0x02000440);
+
+ writel(esdctl, esdctlreg);
+}
+
+void __bare_init __naked board_init_lowlevel(void)
+{
+ uint32_t r, s;
+ unsigned long ccm_base = IMX_CCM_BASE;
+ unsigned long iomuxc_base = IMX_IOMUXC_BASE;
+#ifdef CONFIG_NAND_IMX_BOOT
+ unsigned int *trg, *src;
+ int i;
+#endif
+ r = get_cr();
+ r |= CR_Z; /* Flow prediction (Z) */
+ r |= CR_U; /* unaligned accesses */
+ r |= CR_FI; /* Low Int Latency */
+
+ __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(s));
+ s |= 0x7;
+ __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1" : : "r"(s));
+
+ set_cr(r);
+
+ r = 0;
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
+
+ /*
+ * Branch predicition is now enabled. Flush the BTAC to ensure a valid
+ * starting point. Don't flush BTAC while it is disabled to avoid
+ * ARM1136 erratum 408023.
+ */
+ __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r));
+
+ /* invalidate I cache and D cache */
+ __asm__ __volatile__("mcr p15, 0, %0, c7, c7, 0" : : "r"(r));
+
+ /* invalidate TLBs */
+ __asm__ __volatile__("mcr p15, 0, %0, c8, c7, 0" : : "r"(r));
+
+ /* Drain the write buffer */
+ __asm__ __volatile__("mcr p15, 0, %0, c7, c10, 4" : : "r"(r));
+
+ /* Also setup the Peripheral Port Remap register inside the core */
+ r = 0x40000015; /* start from AIPS 2GB region */
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r));
+
+ /*
+ * End of ARM1136 init
+ */
+
+ writel(0x003F4208, ccm_base + CCM_CCMR);
+
+ /* Set MPLL , arm clock and ahb clock*/
+ writel(MPCTL_PARAM_532, ccm_base + CCM_MPCTL);
+
+ writel(PPCTL_PARAM_300, ccm_base + CCM_PPCTL);
+
+ /* Check silicon revision and use 532MHz if >=2.1 */
+ r = readl(IMX_IIM_BASE + 0x24);
+ if (r >= IMX35_CHIP_REVISION_2_1)
+ writel(CCM_PDR0_532, ccm_base + CCM_PDR0);
+ else
+ writel(CCM_PDR0_399, ccm_base + CCM_PDR0);
+
+ r = readl(ccm_base + CCM_CGR0);
+ r |= 0x00300000;
+ writel(r, ccm_base + CCM_CGR0);
+
+ r = readl(ccm_base + CCM_CGR1);
+ r |= 0x00000C00;
+ r |= 0x00000003;
+ writel(r, ccm_base + CCM_CGR1);
+
+ r = readl(IMX_L2CC_BASE + L2X0_AUX_CTRL);
+ r |= 0x1000;
+ writel(r, IMX_L2CC_BASE + L2X0_AUX_CTRL);
+
+ /* Skip SDRAM initialization if we run from RAM */
+ r = get_pc();
+ if (r > 0x80000000 && r < 0x90000000)
+ board_init_lowlevel_return();
+
+ /* Set DDR Type to SDRAM, drive strength workaround *
+ * 0x00000000 MDDR *
+ * 0x00000800 3,3V SDRAM */
+
+ r = 0x00000800;
+ writel(r, iomuxc_base + 0x794);
+ writel(r, iomuxc_base + 0x798);
+ writel(r, iomuxc_base + 0x79c);
+ writel(r, iomuxc_base + 0x7a0);
+ writel(r, iomuxc_base + 0x7a4);
+
+ /* MDDR init, enable mDDR*/
+ writel(0x00000304, ESDMISC);
+
+ phycard_setup_sdram(0x80000000, ESDCTLVAL, ESDCFGVAL);
+#ifdef CONFIG_PCA101_RAM_2BANKS
+ phycard_setup_sdram(0x90000000, ESDCTLVAL, ESDCFGVAL);
+#endif
+
+#ifdef CONFIG_NAND_IMX_BOOT
+ /* skip NAND boot if not running from NFC space */
+ r = get_pc();
+ if (r < IMX_NFC_BASE || r > IMX_NFC_BASE + 0x800)
+ board_init_lowlevel_return();
+
+ src = (unsigned int *)IMX_NFC_BASE;
+ trg = (unsigned int *)TEXT_BASE;
+
+ /* Move ourselves out of NFC SRAM */
+ for (i = 0; i < 0x800 / sizeof(int); i++)
+ *trg++ = *src++;
+
+ /* Jump to SDRAM */
+ r = (unsigned int)&insdram;
+ __asm__ __volatile__("mov pc, %0" : : "r"(r));
+#else
+ board_init_lowlevel_return();
+#endif
+}
+
diff --git a/arch/arm/boards/phyCARD-M/pca101.c b/arch/arm/boards/phyCARD-M/pca101.c
new file mode 100644
index 0000000..b4aeb10
--- /dev/null
+++ b/arch/arm/boards/phyCARD-M/pca101.c
@@ -0,0 +1,276 @@
+/*
+ * (C) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
+ * (C) 2009 Pengutronix, Juergen Beisert <kernel at pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Board support for Phytec's, i.MX35 based CPU card, called: PCA101
+ */
+
+#include <environment.h>
+#include <command.h>
+#include <driver.h>
+#include <partition.h>
+#include <common.h>
+#include <nand.h>
+#include <init.h>
+#include <fec.h>
+#include <io.h>
+#include <fs.h>
+
+#include <asm/mach-types.h>
+#include <asm/armlinux.h>
+#include <asm/mmu.h>
+
+#include <mach/iomux-mx35.h>
+#include <mach/imx-regs.h>
+#include <mach/devices-imx35.h>
+#include <mach/imx-nand.h>
+#include <mach/esdctl.h>
+#include <mach/imx-pll.h>
+
+static struct fec_platform_data fec_info = {
+ .xcv_type = MII100,
+};
+
+struct imx_nand_platform_data nand_info = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+static int pca101_mmu_init(void)
+{
+ l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
+
+ return 0;
+}
+postmmu_initcall(pca101_mmu_init);
+
+static int pca101_mem_init(void)
+{
+ arm_add_mem_device("ram0", IMX_SDRAM_CS0, 128 * 1024 * 1024);
+#ifdef CONFIG_PCA101_RAM_2BANKS
+ arm_add_mem_device("ram1", IMX_SDRAM_CS1, 128 * 1024 * 1024);
+#endif
+ return 0;
+}
+mem_initcall(pca101_mem_init);
+
+static int pca101_devices_init(void)
+{
+ uint32_t reg;
+
+ reg = readl(IMX_CCM_BASE + CCM_RCSR);
+ /* some fuses provide us vital information about connected hardware */
+ if (reg & 0x20000000)
+ nand_info.width = 2; /* 16 bit */
+ else
+ nand_info.width = 1; /* 8 bit */
+
+ imx35_add_fec(&fec_info);
+ imx35_add_nand(&nand_info);
+
+ if ((reg & 0xc00) == 0x800 && ( (reg >> 25) & 0x3) == 0x01 ) { /* reset mode: external boot */
+ devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", 0x80000, 0x80000, PARTITION_FIXED, "env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+ }
+
+ armlinux_set_bootparams((void *)0x80000100);
+ armlinux_set_architecture(2595);
+
+ return 0;
+}
+
+device_initcall(pca101_devices_init);
+
+static struct pad_desc pca101_pads[] = {
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA
+};
+
+static int pca101_console_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pca101_pads, ARRAY_SIZE(pca101_pads));
+
+ imx35_add_uart0();
+
+ return 0;
+}
+
+console_initcall(pca101_console_init);
+
+static int pca101_core_setup(void)
+{
+ u32 tmp;
+
+ /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
+ /*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+ writel(0x77777777, IMX_AIPS1_BASE);
+ writel(0x77777777, IMX_AIPS1_BASE + 0x4);
+ writel(0x77777777, IMX_AIPS2_BASE);
+ writel(0x77777777, IMX_AIPS2_BASE + 0x4);
+
+ /*
+ * Clear the on and off peripheral modules Supervisor Protect bit
+ * for SDMA to access them. Did not change the AIPS control registers
+ * (offset 0x20) access type
+ */
+ writel(0x0, IMX_AIPS1_BASE + 0x40);
+ writel(0x0, IMX_AIPS1_BASE + 0x44);
+ writel(0x0, IMX_AIPS1_BASE + 0x48);
+ writel(0x0, IMX_AIPS1_BASE + 0x4C);
+ tmp = readl(IMX_AIPS1_BASE + 0x50);
+ tmp &= 0x00FFFFFF;
+ writel(tmp, IMX_AIPS1_BASE + 0x50);
+
+ writel(0x0, IMX_AIPS2_BASE + 0x40);
+ writel(0x0, IMX_AIPS2_BASE + 0x44);
+ writel(0x0, IMX_AIPS2_BASE + 0x48);
+ writel(0x0, IMX_AIPS2_BASE + 0x4C);
+ tmp = readl(IMX_AIPS2_BASE + 0x50);
+ tmp &= 0x00FFFFFF;
+ writel(tmp, IMX_AIPS2_BASE + 0x50);
+
+ /* MAX (Multi-Layer AHB Crossbar Switch) setup */
+
+ /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
+#define MAX_PARAM1 0x00302154
+ writel(MAX_PARAM1, IMX_MAX_BASE + 0x0); /* for S0 */
+ writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */
+ writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */
+ writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */
+ writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */
+
+ /* SGPCR - always park on last master */
+ writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */
+ writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */
+ writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */
+ writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */
+ writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */
+
+ /* MGPCR - restore default values */
+ writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */
+ writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */
+ writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */
+ writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */
+ writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */
+ writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */
+
+ /*
+ * M3IF Control Register (M3IFCTL)
+ * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
+ * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000
+ * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000
+ * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
+ * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000
+ * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
+ * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
+ * ------------
+ * 0x00000040
+ */
+ writel(0x40, IMX_M3IF_BASE);
+
+ return 0;
+}
+
+core_initcall(pca101_core_setup);
+
+#define CCM_PDR0_PARAM_399 0x00011000
+#define CCM_PDR0_PARAM_532 0x00001000
+
+static int do_cpufreq(struct command *cmdtp, int argc, char *argv[])
+{
+ unsigned long freq;
+
+ if (argc != 2) {
+ barebox_cmd_usage(cmdtp);
+ return 1;
+ }
+
+ freq = simple_strtoul(argv[1], NULL, 0);
+
+ switch (freq) {
+ case 399:
+ writel(CCM_PDR0_PARAM_399, IMX_CCM_BASE + CCM_PDR0);
+ break;
+ case 532:
+ writel(CCM_PDR0_PARAM_532, IMX_CCM_BASE + CCM_PDR0);
+ break;
+ default:
+ barebox_cmd_usage(cmdtp);
+ return 1;
+ }
+
+ printf("Switched CPU frequency to %ldMHz\n", freq);
+
+ return 0;
+}
+
+static const __maybe_unused char cmd_cpufreq_help[] =
+"Usage: cpufreq 399|532\n"
+"\n"
+"Set CPU frequency to <freq> MHz\n";
+
+BAREBOX_CMD_START(cpufreq)
+ .cmd = do_cpufreq,
+ .usage = "adjust CPU frequency",
+ BAREBOX_CMD_HELP(cmd_cpufreq_help)
+BAREBOX_CMD_END
+
+#ifdef CONFIG_NAND_IMX_BOOT
+void __bare_init nand_boot(void)
+{
+ /*
+ * The driver is able to detect NAND's pagesize by CPU internal
+ * fuses or external pull ups. But not the blocksize...
+ */
+ imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
+}
+#endif
diff --git a/arch/arm/configs/pca101_defconfig b/arch/arm/configs/pca101_defconfig
new file mode 100644
index 0000000..67e3024
--- /dev/null
+++ b/arch/arm/configs/pca101_defconfig
@@ -0,0 +1,67 @@
+CONFIG_ARCH_IMX=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARCH_IMX_EXTERNAL_BOOT=y
+CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND=y
+CONFIG_NAND_IMX_BOOT_2K=y
+CONFIG_ARCH_IMX35=y
+CONFIG_MACH_PCA101=y
+CONFIG_IMX_CLKO=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x2000000
+CONFIG_KALLSYMS=y
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="defaultenv arch/arm/boards/phyCARD-M/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_I2C=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_SOFT is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+CONFIG_NAND_IMX=y
+CONFIG_UBI=y
+CONFIG_ZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 27bf386..817d0a2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -12,6 +12,7 @@ config ARCH_TEXT_BASE
default 0x83f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
default 0x87f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
default 0x87f00000 if MACH_FREESCALE_MX35_3STACK
+ default 0x87f00000 if MACH_PCA101
default 0xa7f00000 if MACH_PCA100
default 0xa0000000 if MACH_PCM038
default 0x87f00000 if MACH_PCM037
@@ -34,6 +35,7 @@ config BOARDINFO
default "Freescale MX35 3Stack" if MACH_FREESCALE_MX35_3STACK
default "Freescale MX25 3Stack" if MACH_FREESCALE_MX25_3STACK
default "Phytec phyCard-i.MX27" if MACH_PCA100
+ default "Phytec phyCARD-M" if MACH_PCA101
default "Phytec phyCORE-i.MX27" if MACH_PCM038
default "Phytec phyCORE-i.MX31" if MACH_PCM037
default "Phytec phyCORE-i.MX35" if MACH_PCM043
@@ -358,6 +360,14 @@ config MACH_GUF_CUPID
Say Y here if you are using the Garz+Fricke Neso board equipped
with a Freescale i.MX35 Processor
+config MACH_PCA101
+ bool "phyCARD-M"
+ select MACH_HAS_LOWLEVEL_INIT
+ select ARCH_HAS_L2X0
+ help
+ Say Y here if you are using Phytec's phyCARD-M (pca101) equipped
+ with a Freescale i.MX35 Processor
+
endchoice
endif
@@ -474,6 +484,10 @@ config FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
bool "128 MB (mDDR)"
endchoice
endif
+
+config PCA101_RAM_2BANKS
+ depends on MACH_PCA101
+ bool "two sdram banks equipped on phyCARD"
endmenu
menu "i.MX specific settings "
--
1.7.7.3
More information about the barebox
mailing list