[PATCH 3/7] at91sam9260_devices: properly set slot id
Michael Grzeschik
m.grzeschik at pengutronix.de
Fri Dec 9 06:28:21 EST 2011
Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
---
arch/arm/mach-at91/at91sam9260_devices.c | 34 +++++++++++++++++++++--------
1 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 9d1acda..177f770 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -261,18 +261,32 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
/* CLK */
at91_set_A_periph(AT91_PIN_PA8, 0);
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
+
+ if (mmc_id == 0) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA6, 1);
+ if (data->bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ } else if (mmc_id == 1) {
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ }
}
- dev = add_generic_device("atmel_mci", 0, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
+ dev = add_generic_device("atmel_mci", mmc_id, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
IORESOURCE_MEM, data);
}
#else
--
1.7.7.3
More information about the barebox
mailing list