January 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jan 1 14:48:22 EST 2010
Ending: Fri Jan 29 06:51:16 EST 2010
Messages: 111

• confusion about relocation (ARM)   Matthias Kaehlcke
  • confusion about relocation (ARM)   Eric Bénard
    • confusion about relocation (ARM)   Matthias Kaehlcke
      • confusion about relocation (ARM)   Sascha Hauer
      • confusion about relocation (ARM)   Matthias Kaehlcke
      • confusion about relocation (ARM)   Robert Schwebel
      • confusion about relocation (ARM)   Matthias Kaehlcke
• [PATCH] remove tftp/nfs specific code to net/*   Sascha Hauer
• [PATCH 1/1] net: Exclude code based on selected protocol   Sascha Hauer
  • [PATCH 1/1] net: Exclude code based on selected protocol   Premi, Sanjeev
• [PATCH] fix path specs in arch/arm/mach-arm.dox   Sascha Hauer
• [PATCH] Fix typo in board.dox   Sascha Hauer
• [PATCH 0/2] CFI flash drivers: Fix misleading trace when unprotecting a sector   Matthias Kaehlcke
  • [PATCH 0/2] CFI flash drivers: Fix misleading trace when unprotecting a sector   Sascha Hauer
• [PATCH 1/2] CFI flash driver: Fix misleading trace when unprotecting a sector   Matthias Kaehlcke
• [PATCH 2/2] New CFI flash driver: Fix misleading trace when unprotecting a sector   Matthias Kaehlcke
• Query on default environment   Premi, Sanjeev
• [PATCH 0/5] Add support for EDB93xx boards   Matthias Kaehlcke
  • [PATCH 0/5] Add support for EDB93xx boards   Sascha Hauer
    • [PATCH 0/5] Add support for EDB93xx boards   Matthias Kaehlcke
      • [PATCH 0/5] Add support for EDB93xx boards   Sascha Hauer
      • [PATCH] Add support for EDB93xx boards [rev2]   Matthias Kaehlcke
      • [PATCH] Add support for EDB93xx boards [rev2]   Sascha Hauer
      • [PATCH] Add support for EDB93xx boards [rev2]   Matthias Kaehlcke
• [PATCH 1/5] ARM: Add support for EP93xx SoCs   Matthias Kaehlcke
• [PATCH 2/5] Add EP93xx ethernet driver   Matthias Kaehlcke
  • [PATCH 2/5] Add EP93xx ethernet driver   Sascha Hauer
    • [PATCH] Add EP93xx ethernet driver [rev2]   Matthias Kaehlcke
• [PATCH 3/5] Add support for EP9xx GPIOs   Matthias Kaehlcke
• [PATCH 4/5] Add PrimeCell PL010 serial driver   Matthias Kaehlcke
• [PATCH 5/5] Add support for EDB93xx boards   Matthias Kaehlcke
• [PATCH] Fix a data abort with fec_imx   Eric Benard
  • [PATCH] Fix a data abort with fec_imx   Sascha Hauer
• [PATCHv2 00/14] Bring in basic x86 support into 'barebox'   Juergen Beisert
  • [PATCHv2 01/14] Add a tool to activate barebox as a boot loader on x86 architectures   Juergen Beisert
  • [PATCHv2 02/14] Consider real and protected mode in the dump file   Juergen Beisert
  • [PATCHv2 03/14] Adding x86 usage documentation to the tree   Juergen Beisert
  • [PATCHv2 04/14] Adding required architecture header files   Juergen Beisert
  • [PATCHv2 05/14] Bring in the first x86 specific code   Juergen Beisert
  • [PATCHv2 06/14] Add some generic functions to make x86 work   Juergen Beisert
  • [PATCHv2 07/14] Add functions to be able to boot with BIOSs help   Juergen Beisert
  • [PATCHv2 08/14] Add a generic PC platform   Juergen Beisert
  • [PATCHv2 09/14] Bring in the time reference for the x86 platforms   Juergen Beisert
  • [PATCHv2 10/14] Start to add ATA support to barebox   Juergen Beisert
  • [PATCHv2 11/14] Add the main disk driver   Juergen Beisert
  • [PATCHv2 12/14] Add a low level disk drive access driver   Juergen Beisert
  • [PATCHv2 13/14] Add a special command to load and start a bzImage on x86   Juergen Beisert
  • [PATCHv2 14/14] Add the whole x86 architecture to the build system   Juergen Beisert
  • [PATCHv2 00/14] Bring in basic x86 support into 'barebox'   Sascha Hauer
• [PATCH 0/5] Add support for EDB93xx boards [rev2]   Matthias Kaehlcke
  • [PATCH 0/5] Add support for EDB93xx boards [rev2]   Sascha Hauer
• [PATCH 1/5] ARM: Add support for EP93xx SoCs   Matthias Kaehlcke
• [PATCH 2/5] Add EP93xx ethernet driver   Matthias Kaehlcke
• [PATCH 3/5] Add support for EP9xx GPIOs   Matthias Kaehlcke
• [PATCH 4/5] Add PrimeCell PL010 serial driver   Matthias Kaehlcke
• [PATCH 5/5] Add support for EDB93xx boards   Matthias Kaehlcke
• compiling barebox/u-boot-v2 for beagleboard   pgmspam20101 at verizon.net
  • compiling barebox/u-boot-v2 for beagleboard   Sascha Hauer
• [PATCH] armv7: use -march=armv6 to compile v7 code   Sascha Hauer
• [PATCH] documentation: It's U-Boot that doesn't have getopt, not Barebox   Peter Korsgaard
  • [PATCH] documentation: It's U-Boot that doesn't have getopt, not Barebox   Sascha Hauer
• [PATCH 1/4] eukrea_cpuimx27 : update timings   Eric Benard
  • [PATCH 1/4] eukrea_cpuimx27 : update timings   Sascha Hauer
• [PATCH 2/4] Add necessary clocks & defines to get I2C support for i.MX27   Eric Benard
  • [PATCH 3/4] I2C : add NS LP3972 PMIC support   Eric Benard
    • [PATCH 4/4] Eukrea CPUIMX27 : add I2C and LP3972 support   Eric Benard
• [PATCH] addpart: support @<offset>   Peter Korsgaard
• [PATCHV2] addpart: support @<offset>   Peter Korsgaard
  • [PATCHV2] addpart: support @<offset>   Peter Korsgaard
• [PATCHv3] addpart: support @<offset>   Peter Korsgaard
  • [PATCHv3] addpart: support @<offset>   Sascha Hauer
• [PATCH 0/8] update i.MX35 3stack and i2c drivers   Marc Kleine-Budde
  • [PATCH 1/8] mc9sdz60: clean up driver interface   Marc Kleine-Budde
    • [PATCH 2/8] mc13892: clean up driver interface   Marc Kleine-Budde
      • [PATCH 3/8] i.MX35 3stack: adopt board to new mc13892 and mc9sdz60 driver interface   Marc Kleine-Budde
  • [PATCH 0/8] update i.MX35 3stack and i2c drivers   Sascha Hauer
• [PATCH 4/8] i.MX35 3stack: clean up indention   Marc Kleine-Budde
  • [PATCH 5/8] i.MX35 3stack: clean up indention of lowlevel_init   Marc Kleine-Budde
    • [PATCH 6/8] i.MX35 3stack: increase env partition to hold splash image   Marc Kleine-Budde
      • [PATCH 7/8] i.MX35 3stack: update environemnt to support jffs and ubi/ubifs   Marc Kleine-Budde
      • [PATCH 8/8] i.MX35 3stack: update of defconfig   Marc Kleine-Budde
• [PATCH] mach-at91: reset_cpu: fix confusing reference to watchdog   Peter Korsgaard
  • [PATCH] mach-at91: reset_cpu: fix confusing reference to watchdog   Sascha Hauer
• Current status of barebox for OMAP3530/beagle   Luca Ceresoli
  • Current status of barebox for OMAP3530/beagle   Sascha Hauer
    • Current status of barebox for OMAP3530/beagle   Luca Ceresoli
• [PATCH] arm cache fixes   Uwe Kleine-König
  • [PATCH 1/2] give nice output when generating barebox.bin and barebox.S   Uwe Kleine-König
  • [PATCH 2/2] arm: make disabling the cache actually work   Uwe Kleine-König
• Barbox in OpenEmbedded   Eric Bénard
• Current status of barebox for OMAP3530/beagle   Luca Ceresoli
• Patches for -next   Sascha Hauer
  • [PATCH 01/12] remove unused cdp code   Sascha Hauer
  • Patches for -next   Sascha Hauer
• [PATCH 02/12] remove obsolete comment   Sascha Hauer
  • [PATCH 03/12] cache functions from kernel   Sascha Hauer
    • [PATCH 03/12] cache functions from kernel   Uwe Kleine-König
• [PATCH 04/12] remove unused NETCONSOLE stuff   Sascha Hauer
  • [PATCH 05/12] remove unused file common/flash.c   Sascha Hauer
    • [PATCH 06/12] Move tftp/nfs specific code to net/*   Sascha Hauer
      • [PATCH 07/12] remove typedef cmd_tbl_t and replace it with struct command   Sascha Hauer
• [PATCH 08/12] pcm043: initialize cpufreq to 532MHz   Sascha Hauer
  • [PATCH 09/12] replace ET_DEBUG with pr_debug   Sascha Hauer
• [PATCH 10/12] put only once used function inline   Sascha Hauer
  • [PATCH 11/12] add armv6 support to the konfig system   Sascha Hauer
• [PATCH 12/12] i.MX: select armv6 for i.MX31/35   Sascha Hauer
• [PATCH] Fix typo in board.dox   Sascha Hauer
  • [PATCH] Fix typo in board.dox   Sascha Hauer
• [PATCH 1/1] Fix nand_imx for i.MX21   Ivo Clarysse
  • [PATCH 1/1] Fix nand_imx for i.MX21   Sascha Hauer
• [PATCH] i.MX35: Fix pad control bit positions   Juergen Beisert

Last message date: Fri Jan 29 06:51:16 EST 2010
Archived on: Fri Jan 29 06:51:40 EST 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...