[PATCH 4/5] Add PrimeCell PL010 serial driver
Matthias Kaehlcke
matthias at kaehlcke.net
Sat Jan 9 18:29:07 EST 2010
Added driver for ARM PrimeCell PL010 UART
Signed-off-by: Matthias Kaehlcke <matthias at kaehlcke.net>
---
drivers/serial/Kconfig | 7 ++
drivers/serial/Makefile | 2 +-
drivers/serial/serial_pl010.c | 172 +++++++++++++++++++++++++++++++++++++++++
drivers/serial/serial_pl010.h | 100 ++++++++++++++++++++++++
4 files changed, 280 insertions(+), 1 deletions(-)
create mode 100644 drivers/serial/serial_pl010.c
create mode 100644 drivers/serial/serial_pl010.h
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b0ff5fa..8a5056b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -47,6 +47,13 @@ config DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
help
Say Y here if you are using OMAP extensions to NS16550
+config DRIVER_SERIAL_PL010
+ depends on ARCH_EP93XX
+ default y
+ bool "ARM AMBA PL010 support"
+ help
+ Enable this to get support for AMBA PL010 based serial devices
+
config DRIVER_SERIAL_S3C24X0
bool "Samsung S3C24X0 serial driver"
depends on ARCH_S3C24xx
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 8ab680d..9f203bb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -3,7 +3,6 @@
# s3c4510b_uart.o
# serial_max3100.o
# serial_pl010.o
-# serial_pl011.o
# serial_xuartlite.o
obj-$(CONFIG_DRIVER_SERIAL_ARM_DCC) += arm_dcc.o
obj-$(CONFIG_DRIVER_SERIAL_IMX) += serial_imx.o
@@ -13,4 +12,5 @@ obj-$(CONFIG_DRIVER_SERIAL_LINUX_COMSOLE) += linux_console.o
obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX) += serial_mpc5xxx.o
obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN) += serial_blackfin.o
obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o
+obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o
obj-$(CONFIG_DRIVER_SERIAL_S3C24X0) += serial_s3c24x0.o
diff --git a/drivers/serial/serial_pl010.c b/drivers/serial/serial_pl010.c
new file mode 100644
index 0000000..1a6366f
--- /dev/null
+++ b/drivers/serial/serial_pl010.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2010 Matthias Kaehlcke <matthias at kaehlcke.net>
+ *
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt at flyingpig.com.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin at arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "serial_pl010.h"
+
+static int pl010_setbaudrate(struct console_device *cdev, int baudrate)
+{
+ struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+ unsigned int divisor;
+
+ switch (baudrate) {
+ case 9600:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+
+ case 19200:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+
+ case 38400:
+ divisor = UART_PL010_BAUD_38400;
+ break;
+
+ case 57600:
+ divisor = UART_PL010_BAUD_57600;
+ break;
+
+ case 115200:
+ divisor = UART_PL010_BAUD_115200;
+ break;
+
+ default:
+ divisor = UART_PL010_BAUD_38400;
+ }
+
+ writel((divisor & 0xf00) >> 8, &pl010->linctrlmid);
+ writel(divisor & 0xff, &pl010->linctrllow);
+
+ /* high register must always be written */
+ writel(readl(&pl010->linctrlhigh), &pl010->linctrlhigh);
+
+ return 0;
+}
+
+static int pl010_init_port(struct console_device *cdev)
+{
+ struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+ /*
+ * First, disable everything.
+ */
+ writel(0x00, &pl010->ctrl);
+
+ /*
+ * Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
+ */
+ writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN,
+ &pl010->linctrlhigh);
+
+ /*
+ * Finally, enable the UART
+ */
+ writel(UART_PL010_CR_UARTEN, &pl010->ctrl);
+
+ return 0;
+}
+
+static void pl010_putc(struct console_device *cdev, char c)
+{
+ struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+ /* Wait until there is space in the FIFO */
+ while (readl(&pl010->flag) & UART_PL010_FR_TXFF)
+ ; /* noop */
+
+ /* Send the character */
+ writel(c, &pl010->data);
+}
+
+static int pl010_getc(struct console_device *cdev)
+{
+ struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+ unsigned int data;
+
+ /* Wait until there is data in the FIFO */
+ while (readl(&pl010->flag) & UART_PL010_FR_RXFE)
+ ; /* noop */
+
+ data = readl(&pl010->data);
+
+ /* Check for an error flag */
+ if (data & 0xFFFFFF00) {
+ /* Clear the error */
+ writel(0xFFFFFFFF, &pl010->errclr);
+ return -1;
+ }
+
+ return (int)data;
+}
+
+static int pl010_tstc(struct console_device *cdev)
+{
+ struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+ return !(readl(&pl010->flag) & UART_PL010_FR_RXFE);
+}
+
+static int pl010_probe(struct device_d *dev)
+{
+ struct console_device *cdev;
+
+ cdev = malloc(sizeof(struct console_device));
+ dev->type_data = cdev;
+ cdev->dev = dev;
+ cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+ cdev->tstc = pl010_tstc;
+ cdev->putc = pl010_putc;
+ cdev->getc = pl010_getc;
+ cdev->setbrg = pl010_setbaudrate;
+
+ pl010_init_port(cdev);
+
+ console_register(cdev);
+
+ return 0;
+}
+
+static struct driver_d pl010_driver = {
+ .name = "pl010_serial",
+ .probe = pl010_probe,
+};
+
+static int pl010_init(void)
+{
+ register_driver(&pl010_driver);
+
+ return 0;
+}
+
+console_initcall(pl010_init);
diff --git a/drivers/serial/serial_pl010.h b/drivers/serial/serial_pl010.h
new file mode 100644
index 0000000..6124e0e
--- /dev/null
+++ b/drivers/serial/serial_pl010.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2010 Matthias Kaehlcke <matthias at kaehlcke.net>
+ *
+ * (C) Copyright 2003, 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin at arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct hldc_struct {
+ uint32_t ctrl;
+ uint32_t addmtchval;
+ uint32_t addmask;
+ uint32_t rxinfobuf;
+ uint32_t sts;
+};
+
+struct pl010_struct {
+ uint32_t data;
+ union {
+ uint32_t rxsts;
+ uint32_t errclr;
+ };
+ uint32_t linctrlhigh;
+ uint32_t linctrlmid;
+ uint32_t linctrllow;
+ uint32_t ctrl;
+ uint32_t flag;
+ union {
+ uint32_t intid;
+ uint32_t intclr;
+ };
+ uint32_t not_used0[2];
+ uint32_t dmactrl;
+ uint32_t not_used1[53];
+ uint32_t modemctrl;
+ uint32_t modemsts;
+ uint32_t not_used2[65];
+ struct hldc_struct hldc;
+};
+
+#define UART_PL010_RSR_OE (1 << 3)
+#define UART_PL010_RSR_BE (1 << 2)
+#define UART_PL010_RSR_PE (1 << 1)
+#define UART_PL010_RSR_FE (1 << 0)
+
+#define UART_PL010_FR_TXFE (1 << 7)
+#define UART_PL010_FR_RXFF (1 << 6)
+#define UART_PL010_FR_TXFF (1 << 5)
+#define UART_PL010_FR_RXFE (1 << 4)
+#define UART_PL010_FR_BUSY (1 << 3)
+#define UART_PL010_FR_TMSK (UART_PL010_FR_TXFF + UART_PL010_FR_BUSY)
+
+#define UART_PL010_CR_LPE (1 << 7)
+#define UART_PL010_CR_RTIE (1 << 6)
+#define UART_PL010_CR_TIE (1 << 5)
+#define UART_PL010_CR_RIE (1 << 4)
+#define UART_PL010_CR_MSIE (1 << 3)
+#define UART_PL010_CR_IIRLP (1 << 2)
+#define UART_PL010_CR_SIREN (1 << 1)
+#define UART_PL010_CR_UARTEN (1 << 0)
+
+#define UART_PL010_LCRH_WLEN_8 (3 << 5)
+#define UART_PL010_LCRH_WLEN_7 (2 << 5)
+#define UART_PL010_LCRH_WLEN_6 (1 << 5)
+#define UART_PL010_LCRH_WLEN_5 (0 << 5)
+#define UART_PL010_LCRH_FEN (1 << 4)
+#define UART_PL010_LCRH_STP2 (1 << 3)
+#define UART_PL010_LCRH_EPS (1 << 2)
+#define UART_PL010_LCRH_PEN (1 << 1)
+#define UART_PL010_LCRH_BRK (1 << 0)
+
+#define UART_PL010_BAUD_460800 1
+#define UART_PL010_BAUD_230400 3
+#define UART_PL010_BAUD_115200 7
+#define UART_PL010_BAUD_57600 15
+#define UART_PL010_BAUD_38400 23
+#define UART_PL010_BAUD_19200 47
+#define UART_PL010_BAUD_14400 63
+#define UART_PL010_BAUD_9600 95
+#define UART_PL010_BAUD_4800 191
+#define UART_PL010_BAUD_2400 383
+#define UART_PL010_BAUD_1200 767
--
1.6.3.1
More information about the barebox
mailing list