Current status of barebox for OMAP3530/beagle

[Sascha Hauer]

Hi,

On Thu, Jan 21, 2010 at 11:55:00AM +0100, Luca Ceresoli wrote:
> Hi all,
> 
> after reading the docs and searching the list, it is still not clear
> to me how much barebox currently supports OMAP3530 (BeagleBoard in
> particular).
> 
> The omap3530_beagle_per_uart_defconfig is working great as a first
> stage UART loader, as well as adding a few commands. But I failed to
> go much further, i.e. to enable NAND support.

I would expect NAND to be working, though I haven't tested it. What's
going wrong on your board?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |