May 2024 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed May 1 03:14:20 PDT 2024
Ending: Fri May 31 22:59:30 PDT 2024
Messages: 377

• [buildbot] Bump buildbot to v3.11.3 release   LEDE Commits
• [buildbot] Revert "Bump buildbot to v3.11.3 release"   LEDE Commits
• [openwrt/openwrt] ag71xx: Slightly simplify 'ag71xx_rx_packets()'   LEDE Commits
• [openwrt/openwrt] airoha: set KERNEL_TESTING_PATCHVER:=6.6   LEDE Commits
• [openwrt/openwrt] apk: add missing PROVIDES   LEDE Commits
• [openwrt/openwrt] apk: disable helptext for host build   LEDE Commits
• [openwrt/openwrt] apk: disable rootfs repositories during build   LEDE Commits
• [openwrt/openwrt] apk: update to latest HEAD 2024-05-18   LEDE Commits
• [openwrt/openwrt] apk: update to latest HEAD 2024-05-19   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: add mt7981-nor-ddr4 and mt7981-spim-nand-ubi-ddr4 builds   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: add ram-download bl2 images   LEDE Commits
• [openwrt/openwrt] armsr: add kernel 6.6 as a testing target   LEDE Commits
• [openwrt/openwrt] armsr: armv8: add new fsl-enetc-core module for kernel 6.6   LEDE Commits
• [openwrt/openwrt] armsr: armv8: enable serial console for Renesas platforms   LEDE Commits
• [openwrt/openwrt] armsr: Remove kernel 6.1 configuration   LEDE Commits
• [openwrt/openwrt] armsr: Use kernel 6.6 by default   LEDE Commits
• [openwrt/openwrt] ath79: add MikroTik suffix to the local GPIO latch driver   LEDE Commits
• [openwrt/openwrt] ath79: add support for 8Devices Carambola3 board   LEDE Commits
• [openwrt/openwrt] ath79: add support for Dell SonicPoint ACe APL26-0AE   LEDE Commits
• [openwrt/openwrt] ath79: add support for Senao Engenius ENS1750   LEDE Commits
• [openwrt/openwrt] ath79: enable 6.6 testing kernel   LEDE Commits
• [openwrt/openwrt] ath79: fix build error for downstream gpio drivers   LEDE Commits
• [openwrt/openwrt] ath79: qca9563: add support for Amplifi Router HD   LEDE Commits
• [openwrt/openwrt] ath79: refresh 6.6 kernel config files   LEDE Commits
• [openwrt/openwrt] ath79: refresh 6.6 kernel patches   LEDE Commits
• [openwrt/openwrt] ath79: refresh patches   LEDE Commits
• [openwrt/openwrt] ath79: rename patches directory and kernel config from 6.1 to 6.6   LEDE Commits
• [openwrt/openwrt] ath79: restore kernel 6.1 config files and patches   LEDE Commits
• [openwrt/openwrt] ath79: skip reset control for syscon devices   LEDE Commits
• [openwrt/openwrt] audit: fix compile error on some systems   LEDE Commits
• [openwrt/openwrt] base-files: add compatibility for APK and OPKG   LEDE Commits
• [openwrt/openwrt] base-files: add update_alternatives function   LEDE Commits
• [openwrt/openwrt] base-files: armsr: add script to migrate GPIO switches on Ten64 board   LEDE Commits
• [openwrt/openwrt] base-files: armsr: number Ten64 GPIOs according to kernel version   LEDE Commits
• [openwrt/openwrt] base-files: correctly split install-key function for APK   LEDE Commits
• [openwrt/openwrt] base-files: fix uid/gid auto-enumeration to avoid 16-bit limit   LEDE Commits
• [openwrt/openwrt] bcm27xx-gpu-fw: update to v1.20240424   LEDE Commits
• [openwrt/openwrt] bcm27xx-utils: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx: correct cmdline.txt consoles for procd   LEDE Commits
• [openwrt/openwrt] bpf-headers: fix use of netlink.h header   LEDE Commits
• [openwrt/openwrt] bpf: fix broken inclusion of system include   LEDE Commits
• [openwrt/openwrt] build: add APK package build capabilities   LEDE Commits
• [openwrt/openwrt] build: add option KERNEL_DEBUG_INFO_BTF_MODULES   LEDE Commits
• [openwrt/openwrt] build: also generate the CycloneDX SBOM in imagebuilder   LEDE Commits
• [openwrt/openwrt] build: fix version info in cyclonedx sbom   LEDE Commits
• [openwrt/openwrt] build: generate private key for APK early   LEDE Commits
• [openwrt/openwrt] build: remove duplicate MAINTAINER from package-dumpinfo.mk   LEDE Commits
• [openwrt/openwrt] config: add ARM PMUv3 for kernel 6.6   LEDE Commits
• [openwrt/openwrt] config: build: dont allow STRIP_KERNEL_EXPORTS on kernel 6.6   LEDE Commits
• [openwrt/openwrt] d1: 6.6: set testing kernel   LEDE Commits
• [openwrt/openwrt] d1: refresh kernel config   LEDE Commits
• [openwrt/openwrt] d1: switch default to 6.6   LEDE Commits
• [openwrt/openwrt] dropbear: bump to 2024.85   LEDE Commits
• [openwrt/openwrt] dropbear: clarify DROPBEAR_MODERN_ONLY option   LEDE Commits
• [openwrt/openwrt] dropbear: use ssh-keygen as an alias for dropbearkey   LEDE Commits
• [openwrt/openwrt] ebtables: fix compilation with GCC14   LEDE Commits
• [openwrt/openwrt] firewall4: update to Git HEAD (2024-05-21)   LEDE Commits
• [openwrt/openwrt] fman-ucode: Bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] generic: 5.15, 6.1: use RTL_8221B_VB_CG_PHYID in Realtek PHY detection   LEDE Commits
• [openwrt/openwrt] generic: 6.1, 6.6: move accepted patches to backport folders   LEDE Commits
• [openwrt/openwrt] generic: 6.1, 6.6: mt7530: import pending PHY muxing detection patch   LEDE Commits
• [openwrt/openwrt] generic: 6.1, 6.6: replace Airoha EN8811H PHY driver with upstream   LEDE Commits
• [openwrt/openwrt] generic: 6.6: add patch to support AQR114C PHY ID   LEDE Commits
• [openwrt/openwrt] generic: 6.6: backport patch adding support for rgmii-id in stmmac-ipq806x   LEDE Commits
• [openwrt/openwrt] generic: 6.6: backports and add LED support for Aquantia PHYs   LEDE Commits
• [openwrt/openwrt] generic: 6.6: fix and simplify blkdevparts= cmdline parsing   LEDE Commits
• [openwrt/openwrt] generic: 6.6: fix realtek PHY detection patch   LEDE Commits
• [openwrt/openwrt] generic: 6.6: net: sfp-bus: fix SFP mode detect from bitrate   LEDE Commits
• [openwrt/openwrt] generic: 6.6: remove kernel export stripping patch   LEDE Commits
• [openwrt/openwrt] generic: backport accepted and pending patches for mtk_eth_soc   LEDE Commits
• [openwrt/openwrt] generic: kernel add 6.6 missing symbols   LEDE Commits
• [openwrt/openwrt] generic: move accepted patches for mtk_eth_soc to backport-6.6   LEDE Commits
• [openwrt/openwrt] gengetopt: backport patch fixing support for c++17   LEDE Commits
• [openwrt/openwrt] gengetopt: backport patch fixing support for c++17   LEDE Commits
• [openwrt/openwrt] gitignore: ignore local APK keys   LEDE Commits
• [openwrt/openwrt] gperf: build as C++11   LEDE Commits
• [openwrt/openwrt] gpio-nct5104d: fix compilation with kernel 6.6   LEDE Commits
• [openwrt/openwrt] grub2: add EFI support for loongarch64   LEDE Commits
• [openwrt/openwrt] host-build: always define Host/Prepare/Default   LEDE Commits
• [openwrt/openwrt] host-build: always define Host/Prepare/Default   LEDE Commits
• [openwrt/openwrt] hostapd: fix a null pointer dereference in wpa_supplicant on teardown   LEDE Commits
• [openwrt/openwrt] image: add missing DTC include-prefixes directory   LEDE Commits
• [openwrt/openwrt] imagebuilder: fix broken IB_STANDALONE option   LEDE Commits
• [openwrt/openwrt] imagebuilder: fix multiple issue with manifest and sign keys handling   LEDE Commits
• [openwrt/openwrt] include/rootfs: skip removal of APK cache now deprecated   LEDE Commits
• [openwrt/openwrt] include/trusted-firmware-a.mk: allow overriding package install template   LEDE Commits
• [openwrt/openwrt] ipq4019: fix even more wrong reference to USB node   LEDE Commits
• [openwrt/openwrt] ipq40xx: add support for Linksys WHW03 V1   LEDE Commits
• [openwrt/openwrt] ipq40xx: clean up Linksys WHW03 V2 DTS   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert Engenius EAP1300 to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert Engenius EAP1300 to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: dont panic on PSGMII calibration fail   LEDE Commits
• [openwrt/openwrt] ipq40xx: eap1300: add eap1300ext as alt model   LEDE Commits
• [openwrt/openwrt] ipq40xx: Enable NVMEM_U_BOOT_ENV config   LEDE Commits
• [openwrt/openwrt] ipq40xx: Enable NVMEM_U_BOOT_ENV config   LEDE Commits
• [openwrt/openwrt] ipq40xx: Enable the Engenius EAP1300   LEDE Commits
• [openwrt/openwrt] ipq40xx: Enable the Engenius EAP1300   LEDE Commits
• [openwrt/openwrt] ipq40xx: fixup remaining devices that dont use QCA807x PHY   LEDE Commits
• [openwrt/openwrt] ipq40xx: fritzrepeater-1200: fix MDIO and PHY probing   LEDE Commits
• [openwrt/openwrt] ipq40xx: merge DTS for Linksys WHW03 V1 and V2   LEDE Commits
• [openwrt/openwrt] ipq40xx: ncp-hg100-cellular: drop QPIC BAM node   LEDE Commits
• [openwrt/openwrt] ipq40xx: Properly set MAC addresses for the EAP1300   LEDE Commits
• [openwrt/openwrt] ipq40xx: Properly set MAC addresses for the EAP1300   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for crypto node   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for I2C nodes   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for MDIO node   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for prng node   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for UART nodes   LEDE Commits
• [openwrt/openwrt] ipq40xx: use existing labels for watchdog node   LEDE Commits
• [openwrt/openwrt] ipq40xx: whw03v2: change LED color for 'running' state to blue   LEDE Commits
• [openwrt/openwrt] ipq40xx: whw03v2: fix handling of RGB LED   LEDE Commits
• [openwrt/openwrt] ipq40xx: wpj419: use existing label for PCIe node   LEDE Commits
• [openwrt/openwrt] ipq40xx: wpj419: use existing label for pinctrl node   LEDE Commits
• [openwrt/openwrt] ipq40xx: wpj419: use existing label for SPI node   LEDE Commits
• [openwrt/openwrt] ipq40xx: wpj419: use existing labels for DMA nodes   LEDE Commits
• [openwrt/openwrt] ipq806x: mr42/mr52: fix PCIe ports   LEDE Commits
• [openwrt/openwrt] ipq806x: mr42/mr52: fix PCIe ports   LEDE Commits
• [openwrt/openwrt] ipq806x: rt4230w-rev6: fix status reporting via the LEDs   LEDE Commits
• [openwrt/openwrt] ipq806x: rt4230w-rev6: fix status reporting via the LEDs   LEDE Commits
• [openwrt/openwrt] ipq806x: swap lan leds for Meraki MR52   LEDE Commits
• [openwrt/openwrt] ipq806x: swap lan leds for Meraki MR52   LEDE Commits
• [openwrt/openwrt] iproute2: fix build on GCC 14   LEDE Commits
• [openwrt/openwrt] iproute2: update to 6.9.0   LEDE Commits
• [openwrt/openwrt] kernel/airoha: Create kernel files for v6.6 (from v6.1)   LEDE Commits
• [openwrt/openwrt] kernel/airoha: refresh config-6.6   LEDE Commits
• [openwrt/openwrt] kernel/airoha: refresh patch on top of Linux 6.6   LEDE Commits
• [openwrt/openwrt] kernel/airoha: Restore kernel files for v6.1   LEDE Commits
• [openwrt/openwrt] kernel/armsr: add config stubs and changes needed for 6.6   LEDE Commits
• [openwrt/openwrt] kernel/armsr: Add configuration files and patches for v6.6   LEDE Commits
• [openwrt/openwrt] kernel/armsr: Restore kernel files for v6.1   LEDE Commits
• [openwrt/openwrt] kernel/d1: Create kernel files for v6.6 (from v6.1)   LEDE Commits
• [openwrt/openwrt] kernel/lantiq: Create kernel files for v6.1 (from v5.15)   LEDE Commits
• [openwrt/openwrt] kernel/layerscape: Create kernel files for v6.6 (from v6.1)   LEDE Commits
• [openwrt/openwrt] kernel/modules/other/mlx_wdt: add new package   LEDE Commits
• [openwrt/openwrt] kernel/modules/other/mlxreg: add new package   LEDE Commits
• [openwrt/openwrt] kernel/rockchip: Create kernel files for v6.6 (from v6.1)   LEDE Commits
• [openwrt/openwrt] kernel/rockchip: Restore kernel files for v6.1   LEDE Commits
• [openwrt/openwrt] kernel/tegra: Create kernel files for v6.6 (from v5.15)   LEDE Commits
• [openwrt/openwrt] kernel/tegra: Restore kernel files for v5.15   LEDE Commits
• [openwrt/openwrt] kernel: Add CONFIG_FB_DEVICE to kmod-fb   LEDE Commits
• [openwrt/openwrt] kernel: add kmod-ata-ahci-dwc   LEDE Commits
• [openwrt/openwrt] kernel: add missing check for TCP GRO   LEDE Commits
• [openwrt/openwrt] kernel: add missing kernel 6.6 symbols   LEDE Commits
• [openwrt/openwrt] kernel: add missing kernel 6.6 symbols   LEDE Commits
• [openwrt/openwrt] kernel: add missing patch header   LEDE Commits
• [openwrt/openwrt] kernel: backport upstream GRO fixes   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.156   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.156   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.157   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.157   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.158   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.158   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.30   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.31   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.32   LEDE Commits
• [openwrt/openwrt] kernel: fix corrupted ethernet header on bridge multicast-to-unicast   LEDE Commits
• [openwrt/openwrt] kernel: fix tools build breakage on macos with x86   LEDE Commits
• [openwrt/openwrt] kernel: kmod-can-usb-esd: Fix build on kernel 6.6   LEDE Commits
• [openwrt/openwrt] kernel: kmod-ipt-clusterip: Depend on kernel 5.15 and 6.1   LEDE Commits
• [openwrt/openwrt] kernel: ltq-vdsl-vr9-mei: fix warning about field-spanning write   LEDE Commits
• [openwrt/openwrt] kernel: modules: netdevices: add depedency required for loongarch64   LEDE Commits
• [openwrt/openwrt] kernel: modules: video: adapt for loongarch64   LEDE Commits
• [openwrt/openwrt] kernel: qca-nss-dp: add back printing attached PHY-s   LEDE Commits
• [openwrt/openwrt] kernel: qca-nss-dp: update to 12.5.r2 for kernel 6.6   LEDE Commits
• [openwrt/openwrt] kernel: qca-ssdk: update to 12.5 for kernel 6.6   LEDE Commits
• [openwrt/openwrt] kernel: qca-ssdk: use bash as shell   LEDE Commits
• [openwrt/openwrt] kernel: video-dma: explicitly state packaged modules   LEDE Commits
• [openwrt/openwrt] kirkwood: add D-Link DNS-320L support   LEDE Commits
• [openwrt/openwrt] kselftests-bpf: update for kernel 6.6   LEDE Commits
• [openwrt/openwrt] lantiq: add patch to fix the reset gpio handling in the pci driver   LEDE Commits
• [openwrt/openwrt] lantiq: Add some gswip patches   LEDE Commits
• [openwrt/openwrt] lantiq: disable building of ZyXEL P-2812HNU F1   LEDE Commits
• [openwrt/openwrt] lantiq: dts: add missing irqs to mei node on AmazonSE, Danube and AR9   LEDE Commits
• [openwrt/openwrt] lantiq: dts: vr9: add missing interrupts to pcie node   LEDE Commits
• [openwrt/openwrt] lantiq: Fix bug in error handling of timer driver   LEDE Commits
• [openwrt/openwrt] lantiq: Fix compile of lantiq components with kernel 6.1   LEDE Commits
• [openwrt/openwrt] lantiq: ifxmips_pcie: use dev_err_probe   LEDE Commits
• [openwrt/openwrt] lantiq: ifxmips_pcie: use platform_get_irq to get irqs from dts   LEDE Commits
• [openwrt/openwrt] lantiq: ltq-adsl-mei: use platform_get_irq to get irqs   LEDE Commits
• [openwrt/openwrt] lantiq: ltq-atm: use platform_get_irq to get irqs   LEDE Commits
• [openwrt/openwrt] lantiq: ltq-ptm: use platform_get_irq to get irqs   LEDE Commits
• [openwrt/openwrt] lantiq: ltq-vmmc: fix write beyond size of field   LEDE Commits
• [openwrt/openwrt] lantiq: ltq-vmmc: get irqs from kernel-in-tree vmmc driver   LEDE Commits
• [openwrt/openwrt] lantiq: old gptu timer driver: use platform_get_irq to get irqs   LEDE Commits
• [openwrt/openwrt] lantiq: Refresh kernel configuration   LEDE Commits
• [openwrt/openwrt] lantiq: Refresh patches and configuration   LEDE Commits
• [openwrt/openwrt] lantiq: set Linux 6.1 as testing kernel   LEDE Commits
• [openwrt/openwrt] lantiq: switch to kernel 6.1   LEDE Commits
• [openwrt/openwrt] lantiq: vmmc kernel-in-tree driver: use platform_get_irq to get irqs   LEDE Commits
• [openwrt/openwrt] layerscape: add 6.6 testing kernel   LEDE Commits
• [openwrt/openwrt] layerscape: adjust dts path in image scripts   LEDE Commits
• [openwrt/openwrt] layerscape: kernel: refresh 6.6 patches   LEDE Commits
• [openwrt/openwrt] layerscape: refresh 6.6 config   LEDE Commits
• [openwrt/openwrt] libbpf: Update to v1.4.1   LEDE Commits
• [openwrt/openwrt] libbpf: Update to v1.4.2   LEDE Commits
• [openwrt/openwrt] libunwind: add support for loongarch64   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.11.6   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.12.1   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.12.3   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.12.4   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.12.5   LEDE Commits
• [openwrt/openwrt] libxml2: update to 2.12.6   LEDE Commits
• [openwrt/openwrt] linux-atm: fix build with GCC 14   LEDE Commits
• [openwrt/openwrt] linux-firmware: Update to version 20240513   LEDE Commits
• [openwrt/openwrt] loongarch64: new target   LEDE Commits
• [openwrt/openwrt] ls-ddr-phy: bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] ls-rcw: Bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] mac80211: Add support for RTL8723BE   LEDE Commits
• [openwrt/openwrt] malta: Remove kernel 6.1 configuration   LEDE Commits
• [openwrt/openwrt] malta: Use kernel 6.6 by default   LEDE Commits
• [openwrt/openwrt] mbedtls: export cmake files   LEDE Commits
• [openwrt/openwrt] mbedtls: fix build on GCC 14   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: add OpenWrt One support   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: add OpenWrt One support   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: enable led PWM driver by default   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: fix mt7981.dtsi PCIe support   LEDE Commits
• [openwrt/openwrt] mediatek: add firmware name for AQR PHYs on mt7988a-rfb   LEDE Commits
• [openwrt/openwrt] mediatek: add missing ';;' in shell switch case block   LEDE Commits
• [openwrt/openwrt] mediatek: add support for Cudy TR3000 v1   LEDE Commits
• [openwrt/openwrt] mediatek: add support for Cudy TR3000 v1   LEDE Commits
• [openwrt/openwrt] mediatek: ASUS TUF-AX6000: fix phy-handle numbering   LEDE Commits
• [openwrt/openwrt] mediatek: backport mt7622 dts fix for mt7531 switch id to 6.1   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r2: add rootwait to bootargs   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r4: add ethernet aliases to DT   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r4: add rootwait to bootargs   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r4: add support for 2.5GE PoE variant   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r4: dts: move common parts to dtsi file   LEDE Commits
• [openwrt/openwrt] mediatek: bpi-r4: fix uci-default script for mac storage   LEDE Commits
• [openwrt/openwrt] mediatek: convert mt7988a-rfb to keep bl31/uboot in UBI   LEDE Commits
• [openwrt/openwrt] mediatek: correct address of MT753x switch IC   LEDE Commits
• [openwrt/openwrt] mediatek: drop NMBM layout for Xiaomi WR30U   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add Adtran SmartRG Mount Stuart series   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add support for Cudy M3000 v1   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add support for Xiaomi AX3000T   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: avoid sub-shell invovation in netdev rename loop   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: fix failsafe mode on devices with no lan1   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: prevent faulty mac address assignment   LEDE Commits
• [openwrt/openwrt] mediatek: fix broken PCIe caused by update to 5.15.158   LEDE Commits
• [openwrt/openwrt] mediatek: fix broken PCIe caused by update to 6.6.30   LEDE Commits
• [openwrt/openwrt] mediatek: fix mt7988a pmu interrupt dts property   LEDE Commits
• [openwrt/openwrt] mediatek: fix PWM fan on BPi-R4   LEDE Commits
• [openwrt/openwrt] mediatek: fix sysupgrade config backup on Adtran SmartRG devices   LEDE Commits
• [openwrt/openwrt] mediatek: fix sysupgrade error for WR30U   LEDE Commits
• [openwrt/openwrt] mediatek: increase size of the sdcard image to 512 MiB   LEDE Commits
• [openwrt/openwrt] mediatek: mt7988a.dtsi: add interrupts to GE switch PHYs   LEDE Commits
• [openwrt/openwrt] mediatek: remove macros for previous kernel versions   LEDE Commits
• [openwrt/openwrt] mpc85xx: convert WS-AP3710i to simpleImage wrapper   LEDE Commits
• [openwrt/openwrt] mt76: backport mt7603 fixes important for its stability   LEDE Commits
• [openwrt/openwrt] mt76: fix mt7603 compilation   LEDE Commits
• [openwrt/openwrt] mt76: install mt7981_eeprom_mt7976_dbdc.bin to STAGING_DIR_IMAGE   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2023-12-08)   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2023-12-11)   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2023-12-18)   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2024-01-18)   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2024-02-03)   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2024-05-17)   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] mtd-utils: nand-tuils: build and package 'nandbiterrs'   LEDE Commits
• [openwrt/openwrt] mvebu: add common image definition for FortiGate devices   LEDE Commits
• [openwrt/openwrt] mvebu: add support for Fortinet FortiGate 51E   LEDE Commits
• [openwrt/openwrt] mvebu: add support for Fortinet FortiGate 52E   LEDE Commits
• [openwrt/openwrt] mvebu: add support for Fortinet FortiWiFi 50E-2R   LEDE Commits
• [openwrt/openwrt] mvebu: add support for Fortinet FortiWiFi 51E   LEDE Commits
• [openwrt/openwrt] mvebu: rename common dtsi of FortiGate 30E/50E   LEDE Commits
• [openwrt/openwrt] mvebu: separate common parts to new dtsi for FortiGate/FortiWiFi 3xE   LEDE Commits
• [openwrt/openwrt] mvebu: separate common parts to new dtsi for FortiGate/FortiWiFi 5xE   LEDE Commits
• [openwrt/openwrt] odhcpd: update to Git HEAD (2024-05-08)   LEDE Commits
• [openwrt/openwrt] opensbi: bump to 1.4   LEDE Commits
• [openwrt/openwrt] openssl: add linux64-loongarch64 into the targets list   LEDE Commits
• [openwrt/openwrt] opkg: fix stray \ warnings with grep-3.8   LEDE Commits
• [openwrt/openwrt] packages: refresh patches   LEDE Commits
• [openwrt/openwrt] ply: add dynamic tracing package using BPF   LEDE Commits
• [openwrt/openwrt] ppfe-firmware: Bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] qca-ssdk: add patch to support AQR114C-B0 PHY   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: add support for Linksys MX8500   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: define common Linksys MX device   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: Remove unused gpio from QPIC pins   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: sax1v1k: fix QCA8081 reset   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x support Netgear Orbi Pro SXK80   LEDE Commits
• [openwrt/openwrt] quilt.mk: don't error on refresh/update if patches doesn't exist   LEDE Commits
• [openwrt/openwrt] quilt.mk: use CURDIR instead of ./ for PATCH_DIR and FILES_DIR   LEDE Commits
• [openwrt/openwrt] ramips: add back the gdma driver   LEDE Commits
• [openwrt/openwrt] ramips: Add support for D-Link DIR-2150-A1   LEDE Commits
• [openwrt/openwrt] ramips: add support for ELECOM WMC-M1267GST2   LEDE Commits
• [openwrt/openwrt] ramips: add support for ELECOM WMC-S1267GS2   LEDE Commits
• [openwrt/openwrt] ramips: add support for ELECOM WRC-X1800GS   LEDE Commits
• [openwrt/openwrt] ramips: add support for JDCloud RE-CP-02   LEDE Commits
• [openwrt/openwrt] ramips: add support for TP-Link Archer MR200v5   LEDE Commits
• [openwrt/openwrt] ramips: add support for Wavlink WL-WN531G3   LEDE Commits
• [openwrt/openwrt] ramips: Fix use mac-base for TP-Link TL-MR6400 v4 and v5   LEDE Commits
• [openwrt/openwrt] ramips: Fix wmac dts definition for TP-Link TL-MR6400 v4 and v5   LEDE Commits
• [openwrt/openwrt] ramips: gdma: remove slave_id field   LEDE Commits
• [openwrt/openwrt] ramips: get rid of downstream network device label patch   LEDE Commits
• [openwrt/openwrt] ramips: modules: remove symbol CONFIG_DW_DMAC_PCI   LEDE Commits
• [openwrt/openwrt] ramips: mt7621-dts: describe switch PHYs and adjust PHY muxing   LEDE Commits
• [openwrt/openwrt] ramips: mt7621-dts: do not modify ethernet node for MeiG SLT866   LEDE Commits
• [openwrt/openwrt] ramips: mt7621-dts: remove incorrect ethphy4 node for WAVLINK WL-WN573HX1   LEDE Commits
• [openwrt/openwrt] ramips: parameterize some values in Build/znet-header   LEDE Commits
• [openwrt/openwrt] ramips: remove unnecessary macros for previous kernel versions   LEDE Commits
• [openwrt/openwrt] ramips: rename include file to a more suitable name   LEDE Commits
• [openwrt/openwrt] ramips: samknows whitebox v8: set wifi frequency   LEDE Commits
• [openwrt/openwrt] ramips: use function/color syntax for some dlink dir routers   LEDE Commits
• [openwrt/openwrt] ramips: use led, function/color syntax for some tp-link archer routers   LEDE Commits
• [openwrt/openwrt] realtek: Change LLTP register to LLDP   LEDE Commits
• [openwrt/openwrt] realtek: Change LLTP register to LLDP   LEDE Commits
• [openwrt/openwrt] realtek: Trap LLDP packets to the CPU   LEDE Commits
• [openwrt/openwrt] realtek: Trap LLDP packets to the CPU   LEDE Commits
• [openwrt/openwrt] Revert "mediatek/filogic: add OpenWrt One support"   LEDE Commits
• [openwrt/openwrt] Revert "mediatek: backport mt7622 dts fix for mt7531 switch id to 6.1"   LEDE Commits
• [openwrt/openwrt] rockchip: add Bananapi-R2 Pro board support   LEDE Commits
• [openwrt/openwrt] rockchip: add driver for hardware RNG   LEDE Commits
• [openwrt/openwrt] rockchip: add kernel 6.6 as testing kernel   LEDE Commits
• [openwrt/openwrt] rockchip: enable MT7531 and RTC drivers   LEDE Commits
• [openwrt/openwrt] rockchip: refresh 6.6 patches   LEDE Commits
• [openwrt/openwrt] rockchip: refresh config 6.6   LEDE Commits
• [openwrt/openwrt] rockchip: switch to kernel 6.6   LEDE Commits
• [openwrt/openwrt] rootfs: fix USE_APK detection   LEDE Commits
• [openwrt/openwrt] rpcd: fix package dependency for APK   LEDE Commits
• [openwrt/openwrt] scripts: Add GNU ftp mirror redirector for GNU and Savannah   LEDE Commits
• [openwrt/openwrt] scripts: fix revision calculation using new "main" branch   LEDE Commits
• [openwrt/openwrt] sunxi: add support for Lichee Pi Zero Dock (V3s) board   LEDE Commits
• [openwrt/openwrt] sunxi: drop 6.1 support   LEDE Commits
• [openwrt/openwrt] sunxi: switch default to 6.6   LEDE Commits
• [openwrt/openwrt] tegra: 6.6: refresh config and patches   LEDE Commits
• [openwrt/openwrt] tegra: add testing 6.6 kernel   LEDE Commits
• [openwrt/openwrt] tegra: enable VDE driver   LEDE Commits
• [openwrt/openwrt] tegra: refresh 5.15 config   LEDE Commits
• [openwrt/openwrt] tfa-layerscape: Bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] toolchain/gcc: fix loongarch64 ldso file name   LEDE Commits
• [openwrt/openwrt] toolchain/musl: fix loongarch64 ldso file name   LEDE Commits
• [openwrt/openwrt] toolchain: Disable libtsan and liblsan sanitizer on loongarch64   LEDE Commits
• [openwrt/openwrt] toolchain: gcc: update to 13.3   LEDE Commits
• [openwrt/openwrt] toolchain: glibc: Update glibc 2.38 to recent HEAD   LEDE Commits
• [openwrt/openwrt] tools/elfutils: do not directly link gnulib to libelf   LEDE Commits
• [openwrt/openwrt] tools/elfutils: install a subset of the elfutils binaries   LEDE Commits
• [openwrt/openwrt] tools/elfutils: pass -O2 in HOST_CXXFLAGS   LEDE Commits
• [openwrt/openwrt] tools/gnulib: unmangle fts header on macOS   LEDE Commits
• [openwrt/openwrt] tools/lz4: remove patches   LEDE Commits
• [openwrt/openwrt] tools/missing-macros: install files from HOST_BUILD_DIR instead of src   LEDE Commits
• [openwrt/openwrt] tools/missing-macros: install files from HOST_BUILD_DIR instead of src   LEDE Commits
• [openwrt/openwrt] tools/mkimage: update to v2024.04   LEDE Commits
• [openwrt/openwrt] tools/padjffs2: use Host/Prepare/Default instead of raw commands   LEDE Commits
• [openwrt/openwrt] tools/padjffs2: use Host/Prepare/Default instead of raw commands   LEDE Commits
• [openwrt/openwrt] tools: add more linux include files to fix x86 build on macos   LEDE Commits
• [openwrt/openwrt] tools: mold: update to 2.31.0   LEDE Commits
• [openwrt/openwrt] tools: pkgconf: provide prefix for host and hostpkg stagind directory   LEDE Commits
• [openwrt/openwrt] tools: refresh all patches   LEDE Commits
• [openwrt/openwrt] tools: refresh all patches   LEDE Commits
• [openwrt/openwrt] ubnt-ledbar: adapt for kernel v6.6   LEDE Commits
• [openwrt/openwrt] uboot-envtools: add env settings for ubnt,unifi-6-lr-v2   LEDE Commits
• [openwrt/openwrt] uboot-envtools: add support for ELECOM WRC-X1800GS   LEDE Commits
• [openwrt/openwrt] uboot-envtools: ath79: remove env config for Senao Loader devices   LEDE Commits
• [openwrt/openwrt] uboot-envtools: filogic: add support for BananaPi R4 PoE   LEDE Commits
• [openwrt/openwrt] uboot-layerscape: bump to lf-6.6.3-1.0.0   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: add missing options for mt7988-rfb   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: add support for OpenWrt One   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: add USB support to mt7981.dtsi   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: bpi-r2: fix root= default cmdline parameter   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: bpi-r4: add support for 2.5GE PoE variant   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: fix white-space in package Makefile   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: refresh patches   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: add Bananapi-R2 Pro support   LEDE Commits
• [openwrt/openwrt] ucode: fix ubus defer when running from within eloop (integrated with uloop)   LEDE Commits
• [openwrt/openwrt] ucode: update to Git HEAD (2024-05-09)   LEDE Commits
• [openwrt/openwrt] usbmode: add Huawei E5785   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix creation of IBSS in legacy (non-HT) mode   LEDE Commits
• [openwrt/openwrt] wireless-regdb: update to 2024.05.08   LEDE Commits
• [openwrt/openwrt] wireless-regdb: update to 2024.05.08   LEDE Commits
• [openwrt/openwrt] x86: Activate CONFIG_FB_DEVICE   LEDE Commits
• [openwrt/openwrt] x86: drop 6.1 support   LEDE Commits
• [openwrt/openwrt] x86: generic: config-6.6: add/remove default syms   LEDE Commits
• [openwrt/openwrt] x86: use kernel 6.6 by default   LEDE Commits
• [openwrt/openwrt] xdp-tools: fix compilation wrongly using host header   LEDE Commits
• [openwrt/openwrt] xdp-tools: fix wrong matching for OPENWRT_VERBOSE   LEDE Commits
• [openwrt/openwrt] xdp-tools: refresh patches   LEDE Commits
• [openwrt/openwrt] zynq: 5.15: remove files   LEDE Commits
• [openwrt/openwrt] zynq: set default kernel version to 6.1   LEDE Commits

Last message date: Fri May 31 22:59:30 PDT 2024
Archived on: Fri May 31 22:59:36 PDT 2024

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...