[openwrt/openwrt] mediatek/filogic: add OpenWrt One support
LEDE Commits
lede-commits at lists.infradead.org
Tue May 21 02:36:52 PDT 2024
blogic pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/dd58ad968a2877ef8a3f2f057e07c7b9683560cd
commit dd58ad968a2877ef8a3f2f057e07c7b9683560cd
Author: John Crispin <john at phrozen.org>
AuthorDate: Thu Apr 4 22:38:50 2024 +0200
mediatek/filogic: add OpenWrt One support
Specification:
- MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
- 1GB RAM
- 16MB NOR
- 128MB NAND
- 3 LEDs (red, green, blue, white)
- 2 buttons (reset, user defined)
- 1 2.5Gbit WAN port (Airoha EN8811h)
- 1 1Gbit LAN ports
- 1 single lane M.2 SSD slot
- 1 mikroBus socket
- externel HW WDT (25s refresh time)
- i2c RTC (with battery backup)
Serial Interface
- UBS-C CDC-ACM
- 3 Pins GND, RX, TX
- Settings: 115200, 8N1
MAC addresses are not populated on the early samples.
Signed-off-by: John Crispin <john at phrozen.org>
---
target/linux/mediatek/dts/mt7981b-openwrt-one.dts | 457 +++++++++++++++++++++
.../filogic/base-files/etc/board.d/01_leds | 6 +
.../filogic/base-files/etc/board.d/02_network | 3 +-
.../etc/hotplug.d/firmware/11-mt76-caldata | 3 +
.../filogic/base-files/lib/upgrade/platform.sh | 1 +
target/linux/mediatek/image/filogic.mk | 48 +++
6 files changed, 517 insertions(+), 1 deletion(-)
diff --git a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts
new file mode 100644
index 0000000000..b2223f8d76
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include "mt7981.dtsi"
+
+/ {
+ model = "OpenWrt One";
+ compatible = "openwrt,one", "mediatek,mt7981";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ serial0 = &uart0;
+ led-boot = &led_status_white;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ rootdisk = <&ubi_fit_volume>;
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led_status_white: led-0 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ pwms = <&pwm 0 10000>;
+ linux,default-trigger = "pattern";
+ led-pattern = <0 500 25 500>;
+ };
+
+ led_status_green: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ pwms = <&pwm 1 10000>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_status_red: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio-0 {
+ gpio-export,name = "mikrobus-reset";
+ gpio-export,output = <1>;
+ gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-1 {
+ gpio-export,name = "watchdog-enable";
+ gpio-export,output = <1>;
+ gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-2 {
+ gpio-export,name = "usb-enable";
+ gpio-export,output = <1>;
+ gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <25000>;
+ always-running;
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac at 0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-handle = <&phy15>;
+ phy-mode = "2500base-x";
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_factory_4>;
+ };
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_factory_a>;
+ };
+};
+
+&mdio_bus {
+ phy15: phy at f {
+ reg = <0xf>;
+
+ airoha,pnswap-rx;
+
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <20000>;
+
+ phy-mode = "2500base-x";
+ full-duplex;
+ pause;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led at 0 {
+ reg = <0>;
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_AMBER>;
+ };
+
+ led at 1 {
+ reg = <1>;
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ spi1_flash_pins: spi1-pins {
+ mux {
+ function = "spi";
+ groups = "spi1_1";
+ };
+
+ conf-pu {
+ pins = "SPI1_CS";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ spi2_flash_pins: spi2-pins {
+ mux {
+ function = "spi";
+ groups = "spi2";
+ };
+
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ i2c_pins: i2c-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c0_0";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_0_tx_rx";
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm0_0", "pwm1_1";
+ };
+ };
+
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_pereset";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ status = "okay";
+
+ rtc at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ cs-gpios = <0>, <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <52000000>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bl2";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition at 580000 {
+ label = "ubi";
+ reg = <0x100000 0x7F00000>;
+ compatible = "linux,ubi";
+
+ volumes {
+ ubi_fit_volume: ubi-volume-fit {
+ volname = "fit";
+ };
+ };
+ };
+ };
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_flash_pins>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_flash_pins>;
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ spi-max-frequency = <52000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bl2-nor";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0xc0000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom at 0 {
+ reg = <0x0 0x1000>;
+ };
+
+ macaddr_factory_4: macaddr at 4 {
+ compatible = "mac-base";
+ reg = <0x24 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_factory_a: macaddr at a {
+ compatible = "mac-base";
+ reg = <0x2a 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition at 100000 {
+ label = "fip-nor";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition at 180000 {
+ label = "recovery";
+ reg = <0x180000 0xc80000>;
+ };
+ };
+ };
+};
+
+&xhci {
+ phys = <&u2port0 PHY_TYPE_USB2>;
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ mediatek,u3p-dis-msk = <0x01>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ status = "okay";
+};
+
+&sgmiisys0 {
+ /delete-node/ mediatek,pnswap;
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index b5a2554671..ec239cb0cf 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -59,6 +59,12 @@ openembed,som7981)
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
;;
+openwrt,one)
+ ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
+ ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link"
+ ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
+ ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
+ ;;
routerich,ax3000)
ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 4de3cf044d..fc4bc07b2f 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -59,7 +59,8 @@ mediatek_setup_interfaces()
glinet,gl-mt3000|\
glinet,gl-x3000|\
glinet,gl-xe3000|\
- openembed,som7981)
+ openembed,som7981|\
+ openwrt,one)
ucidef_set_interfaces_lan_wan eth1 eth0
;;
dlink,aquila-pro-ai-m30-a1)
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
index bd68ef7415..27a16e0fb7 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
@@ -31,6 +31,9 @@ case "$FIRMWARE" in
;;
esac
;;
+ openwrt,one)
+ caldata_extract "factory" 0x0 0x1000
+ ;;
ubnt,unifi-6-plus)
caldata_extract_mmc "factory" 0x0 0x1000
;;
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index e7b347dc5f..9b46111d33 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -86,6 +86,7 @@ platform_do_upgrade() {
bananapi,bpi-r4-poe|\
mediatek,mt7988a-rfb|\
jdcloud,re-cp-03|\
+ openwrt,one|\
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
tplink,tl-xdr6088|\
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 5c2f67eb99..e85d67f2ae 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -951,6 +951,54 @@ define Device/openembed_som7981
endef
TARGET_DEVICES += openembed_som7981
+define Build/append-openwrt-one-eeprom
+ dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
+endef
+
+define Device/openwrt_one
+ DEVICE_VENDOR := OpenWrt
+ DEVICE_MODEL := One
+ DEVICE_DTS := mt7981b-openwrt-one
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTC_FLAGS := --pad 4096
+ DEVICE_DTS_LOADADDR := 0x43f00000
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h
+ KERNEL_LOADADDR := 0x44000000
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ KERNEL_INITRAMFS_SUFFIX := .itb
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+ IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+ ARTIFACTS := \
+ nor-preloader.bin nor-bl31-uboot.fip \
+ snand-preloader.bin snand-bl31-uboot.fip \
+ factory.ubi snand-factory.bin nor-factory.bin
+ ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4
+ ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor
+ ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4
+ ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand
+ ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb
+ ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
+ mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
+ mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
+ mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
+ ubinize-image fit squashfs-sysupgrade.itb
+ ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \
+ append-openwrt-one-eeprom | pad-to 1024k | \
+ mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
+ append-image-stage initramfs.itb
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \
+ $(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
+endef
+TARGET_DEVICES += openwrt_one
+
define Device/qihoo_360t7
DEVICE_VENDOR := Qihoo
DEVICE_MODEL := 360T7
More information about the lede-commits
mailing list