[openwrt/openwrt] mediatek: bpi-r4: add support for 2.5GE PoE variant

LEDE Commits lede-commits at lists.infradead.org
Mon May 6 02:02:27 PDT 2024 

dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/fa804f7d0e5a616ec651f0f2fbb7d1387d8c46f8

commit fa804f7d0e5a616ec651f0f2fbb7d1387d8c46f8
Author: Martin Schiller <ms at dev.tdt.de>
AuthorDate: Tue Apr 30 10:50:51 2024 +0200

    mediatek: bpi-r4: add support for 2.5GE PoE variant
    
    This adds support for the bpi-r4 variant with internal 2.5G PHY and
    additional ethernet port instead of second sfp.
    
    Signed-off-by: Martin Schiller <ms at dev.tdt.de>
---
 .../dts/mediatek/mt7988a-bananapi-bpi-r4-poe.dts   | 25 +++++++++++++++++
 .../files-6.6/drivers/net/phy/mediatek-2p5ge.c     |  5 ++++
 .../filogic/base-files/etc/board.d/01_leds         |  3 ++-
 .../filogic/base-files/etc/board.d/02_network      |  3 ++-
 .../etc/hotplug.d/ieee80211/11_fix_wifi_mac        |  3 ++-
 .../filogic/base-files/lib/upgrade/platform.sh     |  5 +++-
 target/linux/mediatek/image/filogic.mk             | 31 +++++++++++++++-------
 7 files changed, 62 insertions(+), 13 deletions(-)

diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-poe.dts b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-poe.dts
new file mode 100644
index 0000000000..efcf0ec358
--- /dev/null
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-poe.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih at mediatek.com>
+ */
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	model = "Bananapi BPI-R4 2.5GE PoE";
+	compatible = "bananapi,bpi-r4-poe",
+		     "mediatek,mt7988a";
+};
+
+&gmac1 {
+	phy-mode = "internal";
+	phy-connection-type = "internal";
+	phy = <&int_2p5g_phy>;
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-names = "i2p5gbe-led";
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+};
diff --git a/target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c b/target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c
index e2e06d1eca..d1d01190ed 100644
--- a/target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c
+++ b/target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c
@@ -137,6 +137,11 @@ static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
 	}
 
 	/* Setup LED */
+
+	/* Set polarity of led0 to active-high for BPI-R4 */
+	phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+			 MTK_PHY_LED0_POLARITY);
+
 	phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
 			 MTK_PHY_LED0_ON_LINK10 |
 			 MTK_PHY_LED0_ON_LINK100 |
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 7f75de8b3b..b5a2554671 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -20,7 +20,8 @@ bananapi,bpi-r3-mini)
 	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan-1" "phy0-ap0"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
 	;;
-bananapi,bpi-r4)
+bananapi,bpi-r4|\
+bananapi,bpi-r4-poe)
 	ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
 	ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
 	ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index c9fd8d96e6..a161a86462 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -41,7 +41,8 @@ mediatek_setup_interfaces()
 	edgecore,eap111)
 		ucidef_set_interfaces_lan_wan eth0 eth1
 		;;
-	bananapi,bpi-r4)
+	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
 		;;
 	cmcc,rax3000m|\
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 62860390eb..0c5f66c029 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -42,7 +42,8 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
 		;;
-	bananapi,bpi-r4)
+	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe)
 		addr=$(cat /sys/class/net/eth0/address)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index ee0e8b62d7..ff791a600a 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -83,6 +83,7 @@ platform_do_upgrade() {
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe|\
 	jdcloud,re-cp-03|\
 	tplink,tl-xdr4288|\
 	tplink,tl-xdr6086|\
@@ -196,6 +197,7 @@ platform_check_image() {
 	case "$board" in
 	bananapi,bpi-r3|\
 	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe|\
 	cmcc,rax3000m)
 		[ "$magic" != "d00dfeed" ] && {
 			echo "Invalid image type."
@@ -223,7 +225,8 @@ platform_copy_config() {
 		;;
 	bananapi,bpi-r3|\
 	bananapi,bpi-r3-mini|\
-	bananapi,bpi-r4)
+	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe)
 		case "$(fitblk_get_bootdev)" in
 		mmcblk*)
 			emmc_copy_config
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index f99a73ac74..13426f4f3a 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -318,11 +318,8 @@ endif
 endef
 TARGET_DEVICES += bananapi_bpi-r3-mini
 
-define Device/bananapi_bpi-r4
+define Device/bananapi_bpi-r4-common
   DEVICE_VENDOR := Bananapi
-  DEVICE_MODEL := BPi-R4
-  DEVICE_DTS := mt7988a-bananapi-bpi-r4
-  DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4
   DEVICE_DTS_DIR := $(DTS_DIR)/
   DEVICE_DTS_LOADADDR := 0x45f00000
   DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd mt7988a-bananapi-bpi-r4-wifi-mt7996a
@@ -337,19 +334,19 @@ define Device/bananapi_bpi-r4
 	       sdcard.img.gz \
 	       snand-preloader.bin snand-bl31-uboot.fip
   ARTIFACT/emmc-preloader.bin	:= mt7988-bl2 emmc-comb
-  ARTIFACT/emmc-bl31-uboot.fip	:= mt7988-bl31-uboot bananapi_bpi-r4-emmc
+  ARTIFACT/emmc-bl31-uboot.fip	:= mt7988-bl31-uboot $$(DEVICE_NAME)-emmc
   ARTIFACT/snand-preloader.bin	:= mt7988-bl2 spim-nand-ubi-comb
-  ARTIFACT/snand-bl31-uboot.fip	:= mt7988-bl31-uboot bananapi_bpi-r4-snand
+  ARTIFACT/snand-bl31-uboot.fip	:= mt7988-bl31-uboot $$(DEVICE_NAME)-snand
   ARTIFACT/sdcard.img.gz	:= mt798x-gpt sdmmc |\
 				   pad-to 17k | mt7988-bl2 sdmmc-comb |\
-				   pad-to 6656k | mt7988-bl31-uboot bananapi_bpi-r4-sdmmc |\
+				   pad-to 6656k | mt7988-bl31-uboot $$(DEVICE_NAME)-sdmmc |\
 				$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 				   pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
 				) \
 				   pad-to 44M | mt7988-bl2 spim-nand-ubi-comb |\
-				   pad-to 45M | mt7988-bl31-uboot bananapi_bpi-r4-snand |\
+				   pad-to 45M | mt7988-bl31-uboot $$(DEVICE_NAME)-snand |\
 				   pad-to 51M | mt7988-bl2 emmc-comb |\
-				   pad-to 52M | mt7988-bl31-uboot bananapi_bpi-r4-emmc |\
+				   pad-to 52M | mt7988-bl31-uboot $$(DEVICE_NAME)-emmc |\
 				   pad-to 56M | mt798x-gpt emmc |\
 				$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 				   pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
@@ -361,8 +358,24 @@ define Device/bananapi_bpi-r4
 	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 endef
+
+define Device/bananapi_bpi-r4
+  DEVICE_MODEL := BPi-R4
+  DEVICE_DTS := mt7988a-bananapi-bpi-r4
+  DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4
+  $(call Device/bananapi_bpi-r4-common)
+endef
 TARGET_DEVICES += bananapi_bpi-r4
 
+define Device/bananapi_bpi-r4-poe
+  DEVICE_MODEL := BPi-R4 2.5GE
+  DEVICE_DTS := mt7988a-bananapi-bpi-r4-poe
+  DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4-poe
+  $(call Device/bananapi_bpi-r4-common)
+  DEVICE_PACKAGES += mt7988-2p5g-phy-firmware
+endef
+TARGET_DEVICES += bananapi_bpi-r4-poe
+
 define Device/cetron_ct3003
   DEVICE_VENDOR := Cetron
   DEVICE_MODEL := CT3003

More information about the lede-commits mailing list