[openwrt/openwrt] mediatek: bpi-r4: dts: move common parts to dtsi file
LEDE Commits
lede-commits at lists.infradead.org
Mon May 6 02:02:26 PDT 2024
dangole pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/14955dcb7e2f8bc3bc77e47a1f1663ed84ba91c1
commit 14955dcb7e2f8bc3bc77e47a1f1663ed84ba91c1
Author: Martin Schiller <ms at dev.tdt.de>
AuthorDate: Tue Apr 30 10:16:21 2024 +0200
mediatek: bpi-r4: dts: move common parts to dtsi file
Move the common parts of the mt7988a-bananapi-bpi-r4.dts to a dtsi file.
This is done to prepare support for the 2.5G Ethernet Variant.
Signed-off-by: Martin Schiller <ms at dev.tdt.de>
---
.../boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 375 +--------------------
...api-bpi-r4.dts => mt7988a-bananapi-bpi-r4.dtsi} | 25 --
2 files changed, 4 insertions(+), 396 deletions(-)
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index d72051d187..d2c223b4ef 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -4,48 +4,13 @@
* Author: Sam.Shih <sam.shih at mediatek.com>
*/
-/dts-v1/;
-#include "mt7988a.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include "mt7988a-bananapi-bpi-r4.dtsi"
/ {
model = "Bananapi BPI-R4";
compatible = "bananapi,bpi-r4",
"mediatek,mt7988a";
- aliases {
- serial0 = &uart0;
- led-boot = &led_green;
- led-failsafe = &led_green;
- led-running = &led_green;
- led-upgrade = &led_green;
- };
-
- chosen {
- stdout-path = &uart0;
- bootargs = "console=ttyS0,115200n1 loglevel=8 pci=pcie_bus_perf ubi.block=0,fit root=/dev/fit0";
- rootdisk-spim-nand = <&ubi_rootfs>;
- };
-
- memory {
- reg = <0x00 0x40000000 0x00 0x10000000>;
- };
-
- /* SFP1 cage (WAN) */
- sfp1: sfp1 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
- los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
- tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
- rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
- maximum-power-milliwatt = <3000>;
- };
-
/* SFP2 cage (LAN) */
sfp2: sfp2 {
compatible = "sff,sfp";
@@ -57,42 +22,6 @@
rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <3000>;
};
-
- gpio-keys {
- compatible = "gpio-keys";
-
- wps {
- label = "WPS";
- linux,code = <KEY_RESTART>;
- gpios = <&pio 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_green: led-green {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_blue: led-blue {
- function = LED_FUNCTION_WPS;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-};
-
-ð {
- status = "okay";
-};
-
-&gmac0 {
- status = "okay";
};
&gmac1 {
@@ -102,306 +31,10 @@
status = "okay";
};
-&gmac2 {
- sfp = <&sfp1>;
- managed = "in-band-status";
- phy-mode = "usxgmii";
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&gsw_phy0 {
- pinctrl-names = "gbe-led";
- pinctrl-0 = <&gbe0_led0_pins>;
-};
-
-&gsw_port0 {
- label = "wan";
-};
-
-&gsw_phy0_led0 {
- status = "okay";
- color = <LED_COLOR_ID_GREEN>;
-};
-
-&gsw_phy1 {
- pinctrl-names = "gbe-led";
- pinctrl-0 = <&gbe1_led0_pins>;
-};
-
-&gsw_phy1_led0 {
- status = "okay";
- color = <LED_COLOR_ID_GREEN>;
-};
-
-&gsw_phy2 {
- pinctrl-names = "gbe-led";
- pinctrl-0 = <&gbe2_led0_pins>;
-};
-
-&gsw_phy2_led0 {
- status = "okay";
- color = <LED_COLOR_ID_GREEN>;
-};
-
-&gsw_phy3 {
- pinctrl-names = "gbe-led";
- pinctrl-0 = <&gbe3_led0_pins>;
-};
-
-&gsw_phy3_led0 {
- status = "okay";
- color = <LED_COLOR_ID_GREEN>;
-};
-
-&cpu0 {
- proc-supply = <&rt5190_buck3>;
-};
-
-&cpu1 {
- proc-supply = <&rt5190_buck3>;
-};
-
-&cpu2 {
- proc-supply = <&rt5190_buck3>;
-};
-
-&cpu3 {
- proc-supply = <&rt5190_buck3>;
-};
-
-&cci {
- proc-supply = <&rt5190_buck3>;
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- rt5190a_64: rt5190a at 64 {
- compatible = "richtek,rt5190a";
- reg = <0x64>;
- vin2-supply = <&rt5190_buck1>;
- vin3-supply = <&rt5190_buck1>;
- vin4-supply = <&rt5190_buck1>;
-
- regulators {
- rt5190_buck1: buck1 {
- regulator-name = "rt5190a-buck1";
- regulator-min-microvolt = <5090000>;
- regulator-max-microvolt = <5090000>;
- regulator-allowed-modes =
- <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
- regulator-boot-on;
- regulator-always-on;
- };
- buck2 {
- regulator-name = "vcore";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
- rt5190_buck3: buck3 {
- regulator-name = "vproc";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- };
- buck4 {
- regulator-name = "rt5190a-buck4";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-allowed-modes =
- <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
- regulator-boot-on;
- regulator-always-on;
- };
- ldo {
- regulator-name = "rt5190a-ldo";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_1_pins>;
- status = "okay";
-
- pca9545: i2c-switch at 70 {
- reg = <0x70>;
- compatible = "nxp,pca9545";
- reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+&pca9545 {
+ i2c_sfp2: i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
-
- i2c_rtc: i2c at 0 { //eeprom,rtc,ngff
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- eeprom at 50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- address-bits = <8>;
- page-size = <8>;
- size = <256>;
- };
-
- eeprom at 57 {
- compatible = "atmel,24c02";
- reg = <0x57>;
- address-bits = <8>;
- page-size = <8>;
- size = <256>;
- };
-
- pcf8563: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- status = "disabled";
- };
- };
-
- i2c_sfp1: i2c at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- i2c_sfp2: i2c at 2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- i2c_wifi: i2c at 3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
- };
-};
-
-/* mPCIe SIM2 */
-&pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pins>;
- status = "okay";
-};
-
-/* mPCIe SIM3 */
-&pcie1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_pins>;
- status = "okay";
-};
-
-/* M.2 key-B SIM1 */
-&pcie2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_pins>;
- status = "okay";
-};
-
-/* M.2 key-M SSD */
-&pcie3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie3_pins>;
- status = "okay";
-};
-
-&ssusb1 {
- status = "okay";
-};
-
-&tphy {
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_flash_pins>;
- status = "okay";
-
- spi_nand: spi_nand at 0 {
- compatible = "spi-nand";
- reg = <0>;
- spi-max-frequency = <52000000>;
- spi-tx-buswidth = <4>;
- spi-rx-buswidth = <4>;
- };
-};
-
-&spi_nand {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "bl2";
- reg = <0x0 0x200000>;
- read-only;
- };
-
- partition at 200000 {
- label = "ubi";
- reg = <0x200000 0x7e00000>;
- compatible = "linux,ubi";
-
- volumes {
- ubi-volume-ubootenv {
- volname = "ubootenv";
- nvmem-layout {
- compatible = "u-boot,env-redundant-bool-layout";
- };
- };
-
- ubi-volume-ubootenv2 {
- volname = "ubootenv2";
- nvmem-layout {
- compatible = "u-boot,env-redundant-bool-layout";
- };
- };
-
- ubi_rootfs: ubi-volume-fit {
- volname = "fit";
- };
- };
- };
+ reg = <2>;
};
};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_2_lite_pins>;
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_3_pins>;
-};
-
-&watchdog {
- status = "okay";
-};
-
-&xphy {
- status = "okay";
-};
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
similarity index 92%
copy from target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
copy to target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index d72051d187..49d7edcd6b 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -46,18 +46,6 @@
maximum-power-milliwatt = <3000>;
};
- /* SFP2 cage (LAN) */
- sfp2: sfp2 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
- los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
- tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
- rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
- maximum-power-milliwatt = <3000>;
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -95,13 +83,6 @@
status = "okay";
};
-&gmac1 {
- sfp = <&sfp2>;
- managed = "in-band-status";
- phy-mode = "usxgmii";
- status = "okay";
-};
-
&gmac2 {
sfp = <&sfp1>;
managed = "in-band-status";
@@ -278,12 +259,6 @@
reg = <1>;
};
- i2c_sfp2: i2c at 2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
i2c_wifi: i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
More information about the lede-commits
mailing list