[openwrt/openwrt] ipq806x: rt4230w-rev6: fix status reporting via the LEDs

[LEDE Commits]

ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/0868268c9fd4397411e9629eedda35b1547e798e

commit 0868268c9fd4397411e9629eedda35b1547e798e
Author: Rodrigo Balerdi <lanchon at gmail.com>
AuthorDate: Fri May 10 03:35:43 2024 -0300

    ipq806x: rt4230w-rev6: fix status reporting via the LEDs
    
    There is a custom LED controller between the 3 SoC GPIO outputs and
    the red and blue LEDs of the device. It implements a strange mapping
    that includes fixed, flashing, and breathing modes.
    
    The current DTS configuration causes OpenWrt to flash the LEDs over
    the controller's own flashing, resulting in chaotic output in boot,
    failsafe, and upgrade modes.
    
    This change fixes the LEDs in the best way possible as long as each
    OpenWrt running state is limited to be signaled by a single led.
    
    Signed-off-by: Rodrigo Balerdi <lanchon at gmail.com>
    Link: https://github.com/openwrt/openwrt/pull/15440
    Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 .../files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-rt4230w-rev6.dts | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-rt4230w-rev6.dts
index 12f15bd147..f10fa367f1 100644
--- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-rt4230w-rev6.dts
+++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-rt4230w-rev6.dts
@@ -14,10 +14,10 @@
 	};
 
 	aliases {
-		led-boot = &ledctrl3;
+		led-boot = &ledctrl1;
 		led-failsafe = &ledctrl1;
-		led-running = &ledctrl2;
-		led-upgrade = &ledctrl3;
+		led-running = &ledctrl3;
+		led-upgrade = &ledctrl1;
 	};
 
 	chosen {
@@ -55,6 +55,7 @@
 		ledctrl2: ledctrl2 {
 			label = "ledctrl2";
 			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
 		};
 
 		ledctrl3: ledctrl3 {