[openwrt/openwrt] lantiq: Add some gswip patches
LEDE Commits
lede-commits at lists.infradead.org
Wed May 15 01:21:09 PDT 2024
nick pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/783c3aace252b5eb596fad15ca91d6aa25a3fbe1
commit 783c3aace252b5eb596fad15ca91d6aa25a3fbe1
Author: Hauke Mehrtens <hauke at hauke-m.de>
AuthorDate: Fri Jun 9 23:27:29 2023 +0200
lantiq: Add some gswip patches
This backports some patches for the gswip switch driver.
I copied them from this repository:
https://github.com/xdarklight/linux/commits/lantiq-gswip-integration-20221022
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
[drop some patches which may break functionality at the moment]
Signed-off-by: Martin Schiller <ms at dev.tdt.de>
---
...-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch | 32 +++++
...tiq_gswip-Only-allow-phy-mode-internal-on.patch | 33 +++++
...tiq_gswip-Use-dev_err_probe-where-appropr.patch | 145 +++++++++++++++++++++
...tiq_gswip-Don-t-manually-call-gswip_port_.patch | 25 ++++
...tiq_gswip-do-also-enable-or-disable-cpu-p.patch | 70 ++++++++++
...tiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch | 30 +++++
...lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch | 24 ++++
...tiq_gswip-Consistently-use-macros-for-the.patch | 47 +++++++
...tiq_gswip-Forbid-gswip_add_single_port_br.patch | 26 ++++
...tiq_gswip-Fix-error-message-in-gswip_add_.patch | 26 ++++
...tiq_gswip-Fix-comments-in-gswip_port_vlan.patch | 36 +++++
...tiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch | 33 +++++
...tiq_gswip-Improve-error-message-in-gswip_.patch | 26 ++++
...-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch | 32 +++++
...tiq_gswip-Only-allow-phy-mode-internal-on.patch | 33 +++++
...tiq_gswip-Use-dev_err_probe-where-appropr.patch | 145 +++++++++++++++++++++
...tiq_gswip-Don-t-manually-call-gswip_port_.patch | 25 ++++
...tiq_gswip-do-also-enable-or-disable-cpu-p.patch | 70 ++++++++++
...tiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch | 30 +++++
...lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch | 24 ++++
...tiq_gswip-Consistently-use-macros-for-the.patch | 47 +++++++
...tiq_gswip-Forbid-gswip_add_single_port_br.patch | 26 ++++
...tiq_gswip-Fix-error-message-in-gswip_add_.patch | 26 ++++
...tiq_gswip-Fix-comments-in-gswip_port_vlan.patch | 36 +++++
...tiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch | 33 +++++
...tiq_gswip-Improve-error-message-in-gswip_.patch | 26 ++++
26 files changed, 1106 insertions(+)
diff --git a/target/linux/lantiq/patches-5.15/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch b/target/linux/lantiq/patches-5.15/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch
new file mode 100644
index 0000000000..c6befe05e5
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch
@@ -0,0 +1,32 @@
+From 82ea7c7fb4e90620beba8b6436fc12df2379ef8d Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 10 Oct 2022 16:52:25 +0200
+Subject: [PATCH 731/768] dt-bindings: net: dsa: lantiq_gswip: Add missing
+ phy-mode and fixed-link
+
+The CPU port has to specify a phy-mode and either a phy or a fixed-link.
+Since GSWIP is connected using a SoC internal protocol there's no PHY
+involved. Add phy-mode = "internal" and a fixed-link to describe the
+communication between the PMAC (Ethernet controller) and GSWIP switch.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
++++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+@@ -97,7 +97,13 @@ switch at e108000 {
+ port at 6 {
+ reg = <0x6>;
+ label = "cpu";
++ phy-mode = "internal";
+ ethernet = <ð0>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+ };
+ };
+
diff --git a/target/linux/lantiq/patches-5.15/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch b/target/linux/lantiq/patches-5.15/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch
new file mode 100644
index 0000000000..cc94a41cf3
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch
@@ -0,0 +1,33 @@
+From a55b9d802e11baceb35bd312419ad82086065b08 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 10 Oct 2022 16:59:35 +0200
+Subject: [PATCH 732/768] net: dsa: lantiq_gswip: Only allow phy-mode =
+ "internal" on the CPU port
+
+Add the CPU port to gswip_xrx200_phylink_get_caps() and
+gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
+so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1513,6 +1513,7 @@ static void gswip_xrx200_phylink_validat
+ case 2:
+ case 3:
+ case 4:
++ case 6:
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+@@ -1552,6 +1553,7 @@ static void gswip_xrx300_phylink_validat
+ case 2:
+ case 3:
+ case 4:
++ case 6:
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
diff --git a/target/linux/lantiq/patches-5.15/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch b/target/linux/lantiq/patches-5.15/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch
new file mode 100644
index 0000000000..b1658e15d8
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch
@@ -0,0 +1,145 @@
+From 4d3dd68a1c56674ff666d0622b545992fac31754 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Sun, 31 Jul 2022 22:54:52 +0200
+Subject: [PATCH 733/768] net: dsa: lantiq_gswip: Use dev_err_probe where
+ appropriate
+
+dev_err_probe() can be used to simplify the existing code. Also it means
+we get rid of the following warning which is seen whenever the PMAC
+(Ethernet controller which connects to GSWIP's CPU port) has not been
+probed yet:
+ gswip 1e108000.switch: dsa switch register failed: -517
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++------------------
+ 1 file changed, 25 insertions(+), 28 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1939,11 +1939,9 @@ static int gswip_gphy_fw_load(struct gsw
+ msleep(200);
+
+ ret = request_firmware(&fw, gphy_fw->fw_name, dev);
+- if (ret) {
+- dev_err(dev, "failed to load firmware: %s, error: %i\n",
+- gphy_fw->fw_name, ret);
+- return ret;
+- }
++ if (ret)
++ return dev_err_probe(dev, ret, "failed to load firmware: %s\n",
++ gphy_fw->fw_name);
+
+ /* GPHY cores need the firmware code in a persistent and contiguous
+ * memory area with a 16 kB boundary aligned start address.
+@@ -1956,9 +1954,9 @@ static int gswip_gphy_fw_load(struct gsw
+ dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
+ memcpy(fw_addr, fw->data, fw->size);
+ } else {
+- dev_err(dev, "failed to alloc firmware memory\n");
+ release_firmware(fw);
+- return -ENOMEM;
++ return dev_err_probe(dev, -ENOMEM,
++ "failed to alloc firmware memory\n");
+ }
+
+ release_firmware(fw);
+@@ -1985,8 +1983,8 @@ static int gswip_gphy_fw_probe(struct gs
+
+ gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
+ if (IS_ERR(gphy_fw->clk_gate)) {
+- dev_err(dev, "Failed to lookup gate clock\n");
+- return PTR_ERR(gphy_fw->clk_gate);
++ return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate),
++ "Failed to lookup gate clock\n");
+ }
+
+ ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
+@@ -2006,8 +2004,8 @@ static int gswip_gphy_fw_probe(struct gs
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
+ break;
+ default:
+- dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
+- return -EINVAL;
++ return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n",
++ gphy_mode);
+ }
+
+ gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
+@@ -2060,8 +2058,9 @@ static int gswip_gphy_fw_list(struct gsw
+ priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
+ break;
+ default:
+- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+- return -ENOENT;
++ return dev_err_probe(dev, -ENOENT,
++ "unknown GSWIP version: 0x%x",
++ version);
+ }
+ }
+
+@@ -2069,10 +2068,9 @@ static int gswip_gphy_fw_list(struct gsw
+ if (match && match->data)
+ priv->gphy_fw_name_cfg = match->data;
+
+- if (!priv->gphy_fw_name_cfg) {
+- dev_err(dev, "GPHY compatible type not supported");
+- return -ENOENT;
+- }
++ if (!priv->gphy_fw_name_cfg)
++ return dev_err_probe(dev, -ENOENT,
++ "GPHY compatible type not supported");
+
+ priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
+ if (!priv->num_gphy_fw)
+@@ -2171,8 +2169,8 @@ static int gswip_probe(struct platform_d
+ return -EINVAL;
+ break;
+ default:
+- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+- return -ENOENT;
++ return dev_err_probe(dev, -ENOENT,
++ "unknown GSWIP version: 0x%x", version);
+ }
+
+ /* bring up the mdio bus */
+@@ -2180,10 +2178,9 @@ static int gswip_probe(struct platform_d
+ if (gphy_fw_np) {
+ err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
+ of_node_put(gphy_fw_np);
+- if (err) {
+- dev_err(dev, "gphy fw probe failed\n");
+- return err;
+- }
++ if (err)
++ return dev_err_probe(dev, err,
++ "gphy fw probe failed\n");
+ }
+
+ /* bring up the mdio bus */
+@@ -2191,20 +2188,20 @@ static int gswip_probe(struct platform_d
+ if (mdio_np) {
+ err = gswip_mdio(priv, mdio_np);
+ if (err) {
+- dev_err(dev, "mdio probe failed\n");
++ dev_err_probe(dev, err, "mdio probe failed\n");
+ goto put_mdio_node;
+ }
+ }
+
+ err = dsa_register_switch(priv->ds);
+ if (err) {
+- dev_err(dev, "dsa switch register failed: %i\n", err);
++ dev_err_probe(dev, err, "dsa switch registration failed\n");
+ goto mdio_bus;
+ }
+ if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
+- dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+- priv->hw_info->cpu_port);
+- err = -EINVAL;
++ err = dev_err_probe(dev, -EINVAL,
++ "wrong CPU port defined, HW only supports port: %i",
++ priv->hw_info->cpu_port);
+ goto disable_switch;
+ }
+
diff --git a/target/linux/lantiq/patches-5.15/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch b/target/linux/lantiq/patches-5.15/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch
new file mode 100644
index 0000000000..1493826c53
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch
@@ -0,0 +1,25 @@
+From 8cf0b680abc157adeec3fb93a10354c470694535 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Thu, 28 Jul 2022 22:37:11 +0200
+Subject: [PATCH 734/768] net: dsa: lantiq_gswip: Don't manually call
+ gswip_port_enable()
+
+We don't need to manually call gswip_port_enable() from within
+gswip_setup() for the CPU port. DSA does this automatically for us.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -874,8 +874,6 @@ static int gswip_setup(struct dsa_switch
+
+ ds->mtu_enforcement_ingress = true;
+
+- gswip_port_enable(ds, cpu_port, NULL);
+-
+ ds->configure_vlan_while_not_filtering = false;
+
+ return 0;
diff --git a/target/linux/lantiq/patches-5.15/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch b/target/linux/lantiq/patches-5.15/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch
new file mode 100644
index 0000000000..2d95b37358
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch
@@ -0,0 +1,70 @@
+From 54a2f7f2c134738bd3f4ea0a213138d169f2726e Mon Sep 17 00:00:00 2001
+From: Martin Schiller <ms at dev.tdt.de>
+Date: Fri, 10 May 2024 13:52:10 +0200
+Subject: [PATCH] net: dsa: lantiq_gswip: do also enable or disable cpu port
+
+Before commit 74be4babe72f ("net: dsa: do not enable or disable non user
+ports"), gswip_port_enable/disable() were also executed for the cpu port
+in gswip_setup() which disabled the cpu port during initialization.
+
+Let's restore this by removing the dsa_is_user_port checks. Also, let's
+clean up the gswip_port_enable() function so that we only have to check
+for the cpu port once.
+
+Fixes: 74be4babe72f ("net: dsa: do not enable or disable non user ports")
+Signed-off-by: Martin Schiller <ms at dev.tdt.de>
+---
+ drivers/net/dsa/lantiq_gswip.c | 24 ++++++++----------------
+ 1 file changed, 8 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -671,13 +671,18 @@ static int gswip_port_enable(struct dsa_
+ struct gswip_priv *priv = ds->priv;
+ int err;
+
+- if (!dsa_is_user_port(ds, port))
+- return 0;
+-
+ if (!dsa_is_cpu_port(ds, port)) {
++ u32 mdio_phy = 0;
++
+ err = gswip_add_single_port_br(priv, port, true);
+ if (err)
+ return err;
++
++ if (phydev)
++ mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
++
++ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
++ GSWIP_MDIO_PHYp(port));
+ }
+
+ /* RMON Counter Enable for port */
+@@ -690,16 +695,6 @@ static int gswip_port_enable(struct dsa_
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+
+- if (!dsa_is_cpu_port(ds, port)) {
+- u32 mdio_phy = 0;
+-
+- if (phydev)
+- mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+-
+- gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+- GSWIP_MDIO_PHYp(port));
+- }
+-
+ return 0;
+ }
+
+@@ -707,9 +702,6 @@ static void gswip_port_disable(struct ds
+ {
+ struct gswip_priv *priv = ds->priv;
+
+- if (!dsa_is_user_port(ds, port))
+- return;
+-
+ gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
diff --git a/target/linux/lantiq/patches-5.15/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch b/target/linux/lantiq/patches-5.15/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch
new file mode 100644
index 0000000000..26f7c0f414
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch
@@ -0,0 +1,30 @@
+From 8ab55ac9678ca1f50f786c84484599dd675c5a9f Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Wed, 18 May 2022 23:53:09 +0200
+Subject: [PATCH 736/768] net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in
+ gswip_port_change_mtu()
+
+Make the check for the CPU port in gswip_port_change_mtu() consistent
+with other areas of the driver by using dsa_is_cpu_port().
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1463,12 +1463,11 @@ static int gswip_port_max_mtu(struct dsa
+ static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct gswip_priv *priv = ds->priv;
+- int cpu_port = priv->hw_info->cpu_port;
+
+ /* CPU port always has maximum mtu of user ports, so use it to set
+ * switch frame size, including 8 byte special header.
+ */
+- if (port == cpu_port) {
++ if (dsa_is_cpu_port(ds, port)) {
+ new_mtu += 8;
+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
+ GSWIP_MAC_FLEN);
diff --git a/target/linux/lantiq/patches-5.15/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch b/target/linux/lantiq/patches-5.15/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch
new file mode 100644
index 0000000000..0a17d14759
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch
@@ -0,0 +1,24 @@
+From ef98b183d8fc7187a2efcc21c8f54f3cf061d556 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Tue, 17 May 2022 22:39:58 +0200
+Subject: [PATCH 737/768] net: dsa: lantiq_gswip: Change literal 6 to ETH_ALEN
+
+The addr variable in gswip_port_fdb_dump() stores a mac address. Use
+ETH_ALEN to make this consistent across other drivers.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1383,7 +1383,7 @@ static int gswip_port_fdb_dump(struct ds
+ {
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+- unsigned char addr[6];
++ unsigned char addr[ETH_ALEN];
+ int i;
+ int err;
+
diff --git a/target/linux/lantiq/patches-5.15/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch b/target/linux/lantiq/patches-5.15/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch
new file mode 100644
index 0000000000..87382876c2
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch
@@ -0,0 +1,47 @@
+From 61e9b19f6e6174afa7540f0b468a69bc940b91d4 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 21:23:49 +0200
+Subject: [PATCH 738/768] net: dsa: lantiq_gswip: Consistently use macros for
+ the mac bridge table
+
+Introduce a new GSWIP_TABLE_MAC_BRIDGE_PORT macro and use it throughout
+the driver. Also update GSWIP_TABLE_MAC_BRIDGE_STATIC to use the BIT()
+macro. This makes the driver code easier to understand.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -236,7 +236,8 @@
+ #define GSWIP_TABLE_ACTIVE_VLAN 0x01
+ #define GSWIP_TABLE_VLAN_MAPPING 0x02
+ #define GSWIP_TABLE_MAC_BRIDGE 0x0b
+-#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */
++#define GSWIP_TABLE_MAC_BRIDGE_STATIC BIT(0) /* Static not, aging entry */
++#define GSWIP_TABLE_MAC_BRIDGE_PORT GENMASK(7, 4) /* Port on learned entries */
+
+ #define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+@@ -1279,7 +1280,8 @@ static void gswip_port_fast_age(struct d
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+ continue;
+
+- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
++ if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_PORT,
++ mac_bridge.val[0]))
+ continue;
+
+ mac_bridge.valid = false;
+@@ -1414,7 +1416,8 @@ static int gswip_port_fdb_dump(struct ds
+ return err;
+ }
+ } else {
+- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
++ if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_PORT,
++ mac_bridge.val[0])) {
+ err = cb(addr, 0, false, data);
+ if (err)
+ return err;
diff --git a/target/linux/lantiq/patches-5.15/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch b/target/linux/lantiq/patches-5.15/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch
new file mode 100644
index 0000000000..aafea1ec2e
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch
@@ -0,0 +1,26 @@
+From 7a9e185075ababa827d1d3a33b787ad6d718c8ec Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 22:24:24 +0200
+Subject: [PATCH 739/768] net: dsa: lantiq_gswip: Forbid
+ gswip_add_single_port_br on the CPU port
+
+Calling gswip_add_single_port_br() with the CPU port would be a bug
+because then only the CPU port could talk to itself. Add the CPU port to
+the validation at the beginning of gswip_add_single_port_br().
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -633,7 +633,7 @@ static int gswip_add_single_port_br(stru
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int err;
+
+- if (port >= max_ports) {
++ if (port >= max_ports || dsa_is_cpu_port(priv->ds, port)) {
+ dev_err(priv->dev, "single port for %i supported\n", port);
+ return -EIO;
+ }
diff --git a/target/linux/lantiq/patches-5.15/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch b/target/linux/lantiq/patches-5.15/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch
new file mode 100644
index 0000000000..ef8302fe80
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch
@@ -0,0 +1,26 @@
+From 28be6bfb735d851e646abb05b8e24eb6764596f5 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 22:26:20 +0200
+Subject: [PATCH 740/768] net: dsa: lantiq_gswip: Fix error message in
+ gswip_add_single_port_br()
+
+The error message is printed when the port cannot be used. Update the
+error message to reflect that.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -634,7 +634,8 @@ static int gswip_add_single_port_br(stru
+ int err;
+
+ if (port >= max_ports || dsa_is_cpu_port(priv->ds, port)) {
+- dev_err(priv->dev, "single port for %i supported\n", port);
++ dev_err(priv->dev, "single port for %i is not supported\n",
++ port);
+ return -EIO;
+ }
+
diff --git a/target/linux/lantiq/patches-5.15/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch b/target/linux/lantiq/patches-5.15/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch
new file mode 100644
index 0000000000..6eeed5b27a
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch
@@ -0,0 +1,36 @@
+From 45a0371568b1f050d787564875653f41a1f6fb98 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 14:06:40 +0200
+Subject: [PATCH 741/768] net: dsa: lantiq_gswip: Fix comments in
+ gswip_port_vlan_filtering()
+
+Update the comments in gswip_port_vlan_filtering() so it's clear that
+there are two separate cases, one for "tag based VLAN" and another one
+for "port based VLAN".
+
+Suggested-by: Martin Schiller <ms at dev.tdt.de>
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -762,7 +762,7 @@ static int gswip_port_vlan_filtering(str
+ }
+
+ if (vlan_filtering) {
+- /* Use port based VLAN tag */
++ /* Use tag based VLAN */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+@@ -771,7 +771,7 @@ static int gswip_port_vlan_filtering(str
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
+ GSWIP_PCE_PCTRL_0p(port));
+ } else {
+- /* Use port based VLAN tag */
++ /* Use port based VLAN */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
diff --git a/target/linux/lantiq/patches-5.15/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch b/target/linux/lantiq/patches-5.15/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch
new file mode 100644
index 0000000000..b9912e8735
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch
@@ -0,0 +1,33 @@
+From 4775f9543e691d9a2f5dd9aa5d46c66d37928250 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 14:19:05 +0200
+Subject: [PATCH 742/768] net: dsa: lantiq_gswip: Add and use a
+ GSWIP_TABLE_MAC_BRIDGE_FID macro
+
+Only bits [5:0] in mac_bridge.key[3] are reserved for the FID. Add a
+macro so this becomes obvious when reading the driver code.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -238,6 +238,7 @@
+ #define GSWIP_TABLE_MAC_BRIDGE 0x0b
+ #define GSWIP_TABLE_MAC_BRIDGE_STATIC BIT(0) /* Static not, aging entry */
+ #define GSWIP_TABLE_MAC_BRIDGE_PORT GENMASK(7, 4) /* Port on learned entries */
++#define GSWIP_TABLE_MAC_BRIDGE_FID GENMASK(5, 0) /* Filtering identifier */
+
+ #define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+@@ -1357,7 +1358,7 @@ static int gswip_port_fdb(struct dsa_swi
+ mac_bridge.key[0] = addr[5] | (addr[4] << 8);
+ mac_bridge.key[1] = addr[3] | (addr[2] << 8);
+ mac_bridge.key[2] = addr[1] | (addr[0] << 8);
+- mac_bridge.key[3] = fid;
++ mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_FID, fid);
+ mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
+ mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+ mac_bridge.valid = add;
diff --git a/target/linux/lantiq/patches-5.15/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch b/target/linux/lantiq/patches-5.15/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch
new file mode 100644
index 0000000000..2538a4c856
--- /dev/null
+++ b/target/linux/lantiq/patches-5.15/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch
@@ -0,0 +1,26 @@
+From 00b5121435ccd4ce54f79179dd9ee3e2610d7dcf Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 16:31:57 +0200
+Subject: [PATCH 743/768] net: dsa: lantiq_gswip: Improve error message in
+ gswip_port_fdb()
+
+Print the port which is not found to be part of a bridge so it's easier
+to investigate the underlying issue.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1349,7 +1349,8 @@ static int gswip_port_fdb(struct dsa_swi
+ }
+
+ if (fid == -1) {
+- dev_err(priv->dev, "Port not part of a bridge\n");
++ dev_err(priv->dev,
++ "Port %d is not known to be part of bridge\n", port);
+ return -EINVAL;
+ }
+
diff --git a/target/linux/lantiq/patches-6.1/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch b/target/linux/lantiq/patches-6.1/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch
new file mode 100644
index 0000000000..c337c564b6
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0731-dt-bindings-net-dsa-lantiq_gswip-Add-missing-phy-mod.patch
@@ -0,0 +1,32 @@
+From 82ea7c7fb4e90620beba8b6436fc12df2379ef8d Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 10 Oct 2022 16:52:25 +0200
+Subject: [PATCH 731/768] dt-bindings: net: dsa: lantiq_gswip: Add missing
+ phy-mode and fixed-link
+
+The CPU port has to specify a phy-mode and either a phy or a fixed-link.
+Since GSWIP is connected using a SoC internal protocol there's no PHY
+involved. Add phy-mode = "internal" and a fixed-link to describe the
+communication between the PMAC (Ethernet controller) and GSWIP switch.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
++++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+@@ -96,7 +96,13 @@ switch at e108000 {
+
+ port at 6 {
+ reg = <0x6>;
++ phy-mode = "internal";
+ ethernet = <ð0>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+ };
+ };
+
diff --git a/target/linux/lantiq/patches-6.1/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch b/target/linux/lantiq/patches-6.1/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch
new file mode 100644
index 0000000000..4800ee1dd2
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0732-net-dsa-lantiq_gswip-Only-allow-phy-mode-internal-on.patch
@@ -0,0 +1,33 @@
+From a55b9d802e11baceb35bd312419ad82086065b08 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 10 Oct 2022 16:59:35 +0200
+Subject: [PATCH 732/768] net: dsa: lantiq_gswip: Only allow phy-mode =
+ "internal" on the CPU port
+
+Add the CPU port to gswip_xrx200_phylink_get_caps() and
+gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
+so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1509,6 +1509,7 @@ static void gswip_xrx200_phylink_get_cap
+ case 2:
+ case 3:
+ case 4:
++ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+@@ -1540,6 +1541,7 @@ static void gswip_xrx300_phylink_get_cap
+ case 2:
+ case 3:
+ case 4:
++ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
diff --git a/target/linux/lantiq/patches-6.1/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch b/target/linux/lantiq/patches-6.1/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch
new file mode 100644
index 0000000000..f30e7ab00c
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0733-net-dsa-lantiq_gswip-Use-dev_err_probe-where-appropr.patch
@@ -0,0 +1,145 @@
+From 4d3dd68a1c56674ff666d0622b545992fac31754 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Sun, 31 Jul 2022 22:54:52 +0200
+Subject: [PATCH 733/768] net: dsa: lantiq_gswip: Use dev_err_probe where
+ appropriate
+
+dev_err_probe() can be used to simplify the existing code. Also it means
+we get rid of the following warning which is seen whenever the PMAC
+(Ethernet controller which connects to GSWIP's CPU port) has not been
+probed yet:
+ gswip 1e108000.switch: dsa switch register failed: -517
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++------------------
+ 1 file changed, 25 insertions(+), 28 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1919,11 +1919,9 @@ static int gswip_gphy_fw_load(struct gsw
+ msleep(200);
+
+ ret = request_firmware(&fw, gphy_fw->fw_name, dev);
+- if (ret) {
+- dev_err(dev, "failed to load firmware: %s, error: %i\n",
+- gphy_fw->fw_name, ret);
+- return ret;
+- }
++ if (ret)
++ return dev_err_probe(dev, ret, "failed to load firmware: %s\n",
++ gphy_fw->fw_name);
+
+ /* GPHY cores need the firmware code in a persistent and contiguous
+ * memory area with a 16 kB boundary aligned start address.
+@@ -1936,9 +1934,9 @@ static int gswip_gphy_fw_load(struct gsw
+ dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
+ memcpy(fw_addr, fw->data, fw->size);
+ } else {
+- dev_err(dev, "failed to alloc firmware memory\n");
+ release_firmware(fw);
+- return -ENOMEM;
++ return dev_err_probe(dev, -ENOMEM,
++ "failed to alloc firmware memory\n");
+ }
+
+ release_firmware(fw);
+@@ -1965,8 +1963,8 @@ static int gswip_gphy_fw_probe(struct gs
+
+ gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
+ if (IS_ERR(gphy_fw->clk_gate)) {
+- dev_err(dev, "Failed to lookup gate clock\n");
+- return PTR_ERR(gphy_fw->clk_gate);
++ return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate),
++ "Failed to lookup gate clock\n");
+ }
+
+ ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
+@@ -1986,8 +1984,8 @@ static int gswip_gphy_fw_probe(struct gs
+ gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
+ break;
+ default:
+- dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
+- return -EINVAL;
++ return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n",
++ gphy_mode);
+ }
+
+ gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
+@@ -2038,8 +2036,9 @@ static int gswip_gphy_fw_list(struct gsw
+ priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
+ break;
+ default:
+- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+- return -ENOENT;
++ return dev_err_probe(dev, -ENOENT,
++ "unknown GSWIP version: 0x%x",
++ version);
+ }
+ }
+
+@@ -2047,10 +2046,9 @@ static int gswip_gphy_fw_list(struct gsw
+ if (match && match->data)
+ priv->gphy_fw_name_cfg = match->data;
+
+- if (!priv->gphy_fw_name_cfg) {
+- dev_err(dev, "GPHY compatible type not supported");
+- return -ENOENT;
+- }
++ if (!priv->gphy_fw_name_cfg)
++ return dev_err_probe(dev, -ENOENT,
++ "GPHY compatible type not supported");
+
+ priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
+ if (!priv->num_gphy_fw)
+@@ -2150,8 +2148,8 @@ static int gswip_probe(struct platform_d
+ return -EINVAL;
+ break;
+ default:
+- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+- return -ENOENT;
++ return dev_err_probe(dev, -ENOENT,
++ "unknown GSWIP version: 0x%x", version);
+ }
+
+ /* bring up the mdio bus */
+@@ -2159,10 +2157,9 @@ static int gswip_probe(struct platform_d
+ if (gphy_fw_np) {
+ err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
+ of_node_put(gphy_fw_np);
+- if (err) {
+- dev_err(dev, "gphy fw probe failed\n");
+- return err;
+- }
++ if (err)
++ return dev_err_probe(dev, err,
++ "gphy fw probe failed\n");
+ }
+
+ /* bring up the mdio bus */
+@@ -2170,20 +2167,20 @@ static int gswip_probe(struct platform_d
+ if (mdio_np) {
+ err = gswip_mdio(priv, mdio_np);
+ if (err) {
+- dev_err(dev, "mdio probe failed\n");
++ dev_err_probe(dev, err, "mdio probe failed\n");
+ goto put_mdio_node;
+ }
+ }
+
+ err = dsa_register_switch(priv->ds);
+ if (err) {
+- dev_err(dev, "dsa switch register failed: %i\n", err);
++ dev_err_probe(dev, err, "dsa switch registration failed\n");
+ goto mdio_bus;
+ }
+ if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
+- dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+- priv->hw_info->cpu_port);
+- err = -EINVAL;
++ err = dev_err_probe(dev, -EINVAL,
++ "wrong CPU port defined, HW only supports port: %i",
++ priv->hw_info->cpu_port);
+ goto disable_switch;
+ }
+
diff --git a/target/linux/lantiq/patches-6.1/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch b/target/linux/lantiq/patches-6.1/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch
new file mode 100644
index 0000000000..de8416380a
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0734-net-dsa-lantiq_gswip-Don-t-manually-call-gswip_port_.patch
@@ -0,0 +1,25 @@
+From 8cf0b680abc157adeec3fb93a10354c470694535 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Thu, 28 Jul 2022 22:37:11 +0200
+Subject: [PATCH 734/768] net: dsa: lantiq_gswip: Don't manually call
+ gswip_port_enable()
+
+We don't need to manually call gswip_port_enable() from within
+gswip_setup() for the CPU port. DSA does this automatically for us.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -891,8 +891,6 @@ static int gswip_setup(struct dsa_switch
+
+ ds->mtu_enforcement_ingress = true;
+
+- gswip_port_enable(ds, cpu_port, NULL);
+-
+ ds->configure_vlan_while_not_filtering = false;
+
+ return 0;
diff --git a/target/linux/lantiq/patches-6.1/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch b/target/linux/lantiq/patches-6.1/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch
new file mode 100644
index 0000000000..a653c85841
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0735-net-dsa-lantiq_gswip-do-also-enable-or-disable-cpu-p.patch
@@ -0,0 +1,70 @@
+From 54a2f7f2c134738bd3f4ea0a213138d169f2726e Mon Sep 17 00:00:00 2001
+From: Martin Schiller <ms at dev.tdt.de>
+Date: Fri, 10 May 2024 13:52:10 +0200
+Subject: [PATCH] net: dsa: lantiq_gswip: do also enable or disable cpu port
+
+Before commit 74be4babe72f ("net: dsa: do not enable or disable non user
+ports"), gswip_port_enable/disable() were also executed for the cpu port
+in gswip_setup() which disabled the cpu port during initialization.
+
+Let's restore this by removing the dsa_is_user_port checks. Also, let's
+clean up the gswip_port_enable() function so that we only have to check
+for the cpu port once.
+
+Fixes: 74be4babe72f ("net: dsa: do not enable or disable non user ports")
+Signed-off-by: Martin Schiller <ms at dev.tdt.de>
+---
+ drivers/net/dsa/lantiq_gswip.c | 24 ++++++++----------------
+ 1 file changed, 8 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -688,13 +688,18 @@ static int gswip_port_enable(struct dsa_
+ struct gswip_priv *priv = ds->priv;
+ int err;
+
+- if (!dsa_is_user_port(ds, port))
+- return 0;
+-
+ if (!dsa_is_cpu_port(ds, port)) {
++ u32 mdio_phy = 0;
++
+ err = gswip_add_single_port_br(priv, port, true);
+ if (err)
+ return err;
++
++ if (phydev)
++ mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
++
++ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
++ GSWIP_MDIO_PHYp(port));
+ }
+
+ /* RMON Counter Enable for port */
+@@ -707,16 +712,6 @@ static int gswip_port_enable(struct dsa_
+ gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
+ GSWIP_SDMA_PCTRLp(port));
+
+- if (!dsa_is_cpu_port(ds, port)) {
+- u32 mdio_phy = 0;
+-
+- if (phydev)
+- mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+-
+- gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+- GSWIP_MDIO_PHYp(port));
+- }
+-
+ return 0;
+ }
+
+@@ -724,9 +719,6 @@ static void gswip_port_disable(struct ds
+ {
+ struct gswip_priv *priv = ds->priv;
+
+- if (!dsa_is_user_port(ds, port))
+- return;
+-
+ gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
+ GSWIP_FDMA_PCTRLp(port));
+ gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
diff --git a/target/linux/lantiq/patches-6.1/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch b/target/linux/lantiq/patches-6.1/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch
new file mode 100644
index 0000000000..fd19982264
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0736-net-dsa-lantiq_gswip-Use-dsa_is_cpu_port-in-gswip_po.patch
@@ -0,0 +1,30 @@
+From 8ab55ac9678ca1f50f786c84484599dd675c5a9f Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Wed, 18 May 2022 23:53:09 +0200
+Subject: [PATCH 736/768] net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in
+ gswip_port_change_mtu()
+
+Make the check for the CPU port in gswip_port_change_mtu() consistent
+with other areas of the driver by using dsa_is_cpu_port().
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1457,12 +1457,11 @@ static int gswip_port_max_mtu(struct dsa
+ static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct gswip_priv *priv = ds->priv;
+- int cpu_port = priv->hw_info->cpu_port;
+
+ /* CPU port always has maximum mtu of user ports, so use it to set
+ * switch frame size, including 8 byte special header.
+ */
+- if (port == cpu_port) {
++ if (dsa_is_cpu_port(ds, port)) {
+ new_mtu += 8;
+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
+ GSWIP_MAC_FLEN);
diff --git a/target/linux/lantiq/patches-6.1/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch b/target/linux/lantiq/patches-6.1/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch
new file mode 100644
index 0000000000..74e52d1d18
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0737-net-dsa-lantiq_gswip-Change-literal-6-to-ETH_ALEN.patch
@@ -0,0 +1,24 @@
+From ef98b183d8fc7187a2efcc21c8f54f3cf061d556 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Tue, 17 May 2022 22:39:58 +0200
+Subject: [PATCH 737/768] net: dsa: lantiq_gswip: Change literal 6 to ETH_ALEN
+
+The addr variable in gswip_port_fdb_dump() stores a mac address. Use
+ETH_ALEN to make this consistent across other drivers.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1406,7 +1406,7 @@ static int gswip_port_fdb_dump(struct ds
+ {
+ struct gswip_priv *priv = ds->priv;
+ struct gswip_pce_table_entry mac_bridge = {0,};
+- unsigned char addr[6];
++ unsigned char addr[ETH_ALEN];
+ int i;
+ int err;
+
diff --git a/target/linux/lantiq/patches-6.1/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch b/target/linux/lantiq/patches-6.1/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch
new file mode 100644
index 0000000000..0ea90db483
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0738-net-dsa-lantiq_gswip-Consistently-use-macros-for-the.patch
@@ -0,0 +1,47 @@
+From 61e9b19f6e6174afa7540f0b468a69bc940b91d4 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 21:23:49 +0200
+Subject: [PATCH 738/768] net: dsa: lantiq_gswip: Consistently use macros for
+ the mac bridge table
+
+Introduce a new GSWIP_TABLE_MAC_BRIDGE_PORT macro and use it throughout
+the driver. Also update GSWIP_TABLE_MAC_BRIDGE_STATIC to use the BIT()
+macro. This makes the driver code easier to understand.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -236,7 +236,8 @@
+ #define GSWIP_TABLE_ACTIVE_VLAN 0x01
+ #define GSWIP_TABLE_VLAN_MAPPING 0x02
+ #define GSWIP_TABLE_MAC_BRIDGE 0x0b
+-#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */
++#define GSWIP_TABLE_MAC_BRIDGE_STATIC BIT(0) /* Static not, aging entry */
++#define GSWIP_TABLE_MAC_BRIDGE_PORT GENMASK(7, 4) /* Port on learned entries */
+
+ #define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+@@ -1300,7 +1301,8 @@ static void gswip_port_fast_age(struct d
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+ continue;
+
+- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
++ if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_PORT,
++ mac_bridge.val[0]))
+ continue;
+
+ mac_bridge.valid = false;
+@@ -1438,7 +1440,8 @@ static int gswip_port_fdb_dump(struct ds
+ return err;
+ }
+ } else {
+- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
++ if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_PORT,
++ mac_bridge.val[0])) {
+ err = cb(addr, 0, false, data);
+ if (err)
+ return err;
diff --git a/target/linux/lantiq/patches-6.1/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch b/target/linux/lantiq/patches-6.1/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch
new file mode 100644
index 0000000000..1347a98c5c
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0739-net-dsa-lantiq_gswip-Forbid-gswip_add_single_port_br.patch
@@ -0,0 +1,26 @@
+From 7a9e185075ababa827d1d3a33b787ad6d718c8ec Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 22:24:24 +0200
+Subject: [PATCH 739/768] net: dsa: lantiq_gswip: Forbid
+ gswip_add_single_port_br on the CPU port
+
+Calling gswip_add_single_port_br() with the CPU port would be a bug
+because then only the CPU port could talk to itself. Add the CPU port to
+the validation at the beginning of gswip_add_single_port_br().
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -650,7 +650,7 @@ static int gswip_add_single_port_br(stru
+ unsigned int max_ports = priv->hw_info->max_ports;
+ int err;
+
+- if (port >= max_ports) {
++ if (port >= max_ports || dsa_is_cpu_port(priv->ds, port)) {
+ dev_err(priv->dev, "single port for %i supported\n", port);
+ return -EIO;
+ }
diff --git a/target/linux/lantiq/patches-6.1/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch b/target/linux/lantiq/patches-6.1/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch
new file mode 100644
index 0000000000..732588308e
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0740-net-dsa-lantiq_gswip-Fix-error-message-in-gswip_add_.patch
@@ -0,0 +1,26 @@
+From 28be6bfb735d851e646abb05b8e24eb6764596f5 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Mon, 1 Aug 2022 22:26:20 +0200
+Subject: [PATCH 740/768] net: dsa: lantiq_gswip: Fix error message in
+ gswip_add_single_port_br()
+
+The error message is printed when the port cannot be used. Update the
+error message to reflect that.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -651,7 +651,8 @@ static int gswip_add_single_port_br(stru
+ int err;
+
+ if (port >= max_ports || dsa_is_cpu_port(priv->ds, port)) {
+- dev_err(priv->dev, "single port for %i supported\n", port);
++ dev_err(priv->dev, "single port for %i is not supported\n",
++ port);
+ return -EIO;
+ }
+
diff --git a/target/linux/lantiq/patches-6.1/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch b/target/linux/lantiq/patches-6.1/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch
new file mode 100644
index 0000000000..679dd53c47
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0741-net-dsa-lantiq_gswip-Fix-comments-in-gswip_port_vlan.patch
@@ -0,0 +1,36 @@
+From 45a0371568b1f050d787564875653f41a1f6fb98 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 14:06:40 +0200
+Subject: [PATCH 741/768] net: dsa: lantiq_gswip: Fix comments in
+ gswip_port_vlan_filtering()
+
+Update the comments in gswip_port_vlan_filtering() so it's clear that
+there are two separate cases, one for "tag based VLAN" and another one
+for "port based VLAN".
+
+Suggested-by: Martin Schiller <ms at dev.tdt.de>
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -779,7 +779,7 @@ static int gswip_port_vlan_filtering(str
+ }
+
+ if (vlan_filtering) {
+- /* Use port based VLAN tag */
++ /* Use tag based VLAN */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_VSR,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+@@ -788,7 +788,7 @@ static int gswip_port_vlan_filtering(str
+ gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
+ GSWIP_PCE_PCTRL_0p(port));
+ } else {
+- /* Use port based VLAN tag */
++ /* Use port based VLAN */
+ gswip_switch_mask(priv,
+ GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
+ GSWIP_PCE_VCTRL_VEMR,
diff --git a/target/linux/lantiq/patches-6.1/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch b/target/linux/lantiq/patches-6.1/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch
new file mode 100644
index 0000000000..3d284c2ea6
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0742-net-dsa-lantiq_gswip-Add-and-use-a-GSWIP_TABLE_MAC_B.patch
@@ -0,0 +1,33 @@
+From 4775f9543e691d9a2f5dd9aa5d46c66d37928250 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 14:19:05 +0200
+Subject: [PATCH 742/768] net: dsa: lantiq_gswip: Add and use a
+ GSWIP_TABLE_MAC_BRIDGE_FID macro
+
+Only bits [5:0] in mac_bridge.key[3] are reserved for the FID. Add a
+macro so this becomes obvious when reading the driver code.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -238,6 +238,7 @@
+ #define GSWIP_TABLE_MAC_BRIDGE 0x0b
+ #define GSWIP_TABLE_MAC_BRIDGE_STATIC BIT(0) /* Static not, aging entry */
+ #define GSWIP_TABLE_MAC_BRIDGE_PORT GENMASK(7, 4) /* Port on learned entries */
++#define GSWIP_TABLE_MAC_BRIDGE_FID GENMASK(5, 0) /* Filtering identifier */
+
+ #define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+@@ -1378,7 +1379,7 @@ static int gswip_port_fdb(struct dsa_swi
+ mac_bridge.key[0] = addr[5] | (addr[4] << 8);
+ mac_bridge.key[1] = addr[3] | (addr[2] << 8);
+ mac_bridge.key[2] = addr[1] | (addr[0] << 8);
+- mac_bridge.key[3] = fid;
++ mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_FID, fid);
+ mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
+ mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+ mac_bridge.valid = add;
diff --git a/target/linux/lantiq/patches-6.1/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch b/target/linux/lantiq/patches-6.1/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch
new file mode 100644
index 0000000000..5c756c5a19
--- /dev/null
+++ b/target/linux/lantiq/patches-6.1/0743-net-dsa-lantiq_gswip-Improve-error-message-in-gswip_.patch
@@ -0,0 +1,26 @@
+From 00b5121435ccd4ce54f79179dd9ee3e2610d7dcf Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+Date: Fri, 14 Oct 2022 16:31:57 +0200
+Subject: [PATCH 743/768] net: dsa: lantiq_gswip: Improve error message in
+ gswip_port_fdb()
+
+Print the port which is not found to be part of a bridge so it's easier
+to investigate the underlying issue.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+---
+ drivers/net/dsa/lantiq_gswip.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1370,7 +1370,8 @@ static int gswip_port_fdb(struct dsa_swi
+ }
+
+ if (fid == -1) {
+- dev_err(priv->dev, "Port not part of a bridge\n");
++ dev_err(priv->dev,
++ "Port %d is not known to be part of bridge\n", port);
+ return -EINVAL;
+ }
+
More information about the lede-commits
mailing list