[openwrt/openwrt] ipq40xx: convert Engenius EAP1300 to DSA

[LEDE Commits]

ansuel pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/e0567456bf54accf573f9cc3624c14649ce397a6

commit e0567456bf54accf573f9cc3624c14649ce397a6
Author: Corey Minyard <minyard at acm.org>
AuthorDate: Wed May 1 15:43:16 2024 -0500

    ipq40xx: convert Engenius EAP1300 to DSA
    
    This commit converts the EAP1300 to DSA setup.
    
    Signed-off-by: Corey Minyard <minyard at acm.org>
    Link: https://github.com/openwrt/openwrt/pull/15358
    Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 target/linux/ipq40xx/base-files/etc/board.d/02_network  |  1 +
 .../arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts     | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index e86d24fab5..df0fca7544 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -52,6 +52,7 @@ ipq40xx_setup_interfaces()
 	aruba,ap-365|\
 	avm,fritzrepeater-1200|\
 	dlink,dap-2610|\
+	engenius,eap1300|\
 	extreme-networks,ws-ap3915i|\
 	meraki,mr33|\
 	meraki,mr74|\
diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
index e9d4775fd8..3629101403 100644
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-eap1300.dts
@@ -221,6 +221,23 @@
 	status = "okay";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport5 {
+	status = "okay";
+	label = "lan";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";