[openwrt/openwrt] kernel: qca-ssdk: update to 12.5 for kernel 6.6

LEDE Commits lede-commits at lists.infradead.org
Tue May 7 01:03:43 PDT 2024


robimarko pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/cae1b504e93cc9d35c845accab0854e18d801fd1

commit cae1b504e93cc9d35c845accab0854e18d801fd1
Author: Sean Khan <datapronix at protonmail.com>
AuthorDate: Sat May 4 17:09:08 2024 -0400

    kernel: qca-ssdk: update to 12.5 for kernel 6.6
    
    Qualcomm recently committed a new branch (12.5.r2) targeting kernel
    6.6. This lets us clean up a few patches particularly the one for
    "C22/C45" mdio.
    
    A quick way to see what changed for IPQ807x/6018 was to list the files produced
    during build (**/*.o), replace the extension with ".c", and doing a
    `git log`.
    
    Filtering from those commits, ones of particular interest are listed
    below:
    
    ```
    2024-04-16 - 0d8f30aa - fix compile issue on hk with linux style build
    2024-01-29 - 636464f7 - update the check for port link notify
    2024-01-24 - 30c10e7f - enable and disable loopback for xgmac to fix qm stuck issue
    2024-01-15 - b6ea10aa - update the the APIs to access switch
    2024-01-08 - a1687502 - Disable Tx bridge mac before power off the PHY
    2024-01-07 - 3eafb613 - support led configure for malibu phy
    2024-01-07 - 5c1af60d - remove phy type check from mac reset when mode switch
    2023-12-17 - 79d0b1e8 - remove the PHY access APIs in ssdk_plat.c
    2023-12-16 - b2953740 - Update mii read/write functions
    2023-12-11 - 37f2eac3 - add port id check for fdb entry
    2023-12-11 - d040ca4d - support mdio clause45 on kernel6.6
    2023-12-07 - 11494fbc - use barrier mw() during access fdb entry table
    2023-12-03 - 8e40a284 - fix build warnings on kernel6.6
    2023-11-10 - 10aa0a02 - change speed value when call ssdk_port_link_notify
    2023-11-06 - ee4c4a60 - Update mac bitmap value of L3 table on MAC delete
    2023-11-03 - 7cd27d39 - support 10G phy common feature
    2023-10-30 - 383cc0d2 - fix mactype and mux select issue
    2023-10-24 - decf534a - support autoneg status query on force port
    2023-10-11 - 111d574e - move ssdk_led_init to regi_init
    2023-10-08 - 6b14c142 - the combo port also need to parse SFP pins
    2023-10-03 - fb2e0401 - fix port5 interface mode switch issue in erp case
    ```
    
    Verified with users on QNAP 301W, NBG7815, and myself on Dynalink
    DL-WRX36 that everything is functional, including LEDS.
    
    Signed-off-by: Sean Khan <datapronix at protonmail.com>
    Link: https://github.com/openwrt/openwrt/pull/15379
    Signed-off-by: Robert Marko <robimarko at gmail.com>
---
 package/kernel/qca-ssdk/Makefile                   |  8 +-
 .../patches/0001-config-identify-kernel-6.6.patch  | 47 -----------
 ...add-support-for-detection-PSGMII-PHY-mode.patch |  2 +-
 ...pport-selecting-PCS-channel-for-PORT3-on-.patch | 20 ++---
 ...dio-adapt-to-C22-and-C45-read-write-split.patch | 98 ----------------------
 .../patches/200-allow-parallel-build.patch         |  2 +-
 .../patches/201-fix-compile-warnings.patch         | 31 +++++++
 7 files changed, 47 insertions(+), 161 deletions(-)

diff --git a/package/kernel/qca-ssdk/Makefile b/package/kernel/qca-ssdk/Makefile
index bbe9f12051..ed18f17504 100644
--- a/package/kernel/qca-ssdk/Makefile
+++ b/package/kernel/qca-ssdk/Makefile
@@ -1,13 +1,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=qca-ssdk
-PKG_RELEASE:=6
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=https://git.codelinaro.org/clo/qsdk/oss/lklm/qca-ssdk.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2023-10-04
-PKG_SOURCE_VERSION:=23a5aa4a4d5834da7a07efb58baebfbee91786b0
-PKG_MIRROR_HASH:=53fb201053b3aca004c4da07b06a0608b0b3322a2062b1f7ab3b3a7871ddabcb
+PKG_SOURCE_DATE:=2024-04-17
+PKG_SOURCE_VERSION:=3d060f7ad70d087f6b0452abe79ab6d042e8cd53
+PKG_MIRROR_HASH:=6f5e390b294e699491584094f5d7eb941de6237ad8c5320191e9e306fbcd8eb5
 
 PKG_FLAGS:=nonshared
 PKG_BUILD_PARALLEL:=1
diff --git a/package/kernel/qca-ssdk/patches/0001-config-identify-kernel-6.6.patch b/package/kernel/qca-ssdk/patches/0001-config-identify-kernel-6.6.patch
deleted file mode 100644
index 2dc0923263..0000000000
--- a/package/kernel/qca-ssdk/patches/0001-config-identify-kernel-6.6.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From f6c0115daaac586740e873a3b8145c5370a73dce Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko at gmail.com>
-Date: Sat, 17 Feb 2024 13:02:31 +0100
-Subject: [PATCH] config: identify kernel 6.6
-
-Identify kernel 6.6 so it can be compiled against.
-
-Signed-off-by: Robert Marko <robimarko at gmail.com>
----
- config            | 5 +++++
- make/linux_opt.mk | 4 ++--
- 2 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/config
-+++ b/config
-@@ -27,6 +27,11 @@ endif
- ifeq ($(KVER),$(filter 6.1%,$(KVER)))
- 	OS_VER=6_1
- endif
-+
-+ifeq ($(KVER),$(filter 6.6%,$(KVER)))
-+	OS_VER=6_6
-+endif
-+
- ifeq ($(KVER), 3.4.0)
- 	OS_VER=3_4
- endif
---- a/make/linux_opt.mk
-+++ b/make/linux_opt.mk
-@@ -450,7 +450,7 @@ ifeq (KSLIB, $(MODULE_TYPE))
-       KASAN_SHADOW_SCALE_SHIFT := 3
-   endif
- 
--  ifeq ($(OS_VER),$(filter 5_4 6_1, $(OS_VER)))
-+  ifeq ($(OS_VER),$(filter 5_4 6_1 6_6, $(OS_VER)))
-       ifeq ($(ARCH), arm64)
-           KASAN_OPTION += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
-        endif
-@@ -481,7 +481,7 @@ ifeq (KSLIB, $(MODULE_TYPE))
- 
-   endif
- 
--  ifeq ($(OS_VER),$(filter 4_4 5_4 6_1, $(OS_VER)))
-+  ifeq ($(OS_VER),$(filter 4_4 5_4 6_1 6_6, $(OS_VER)))
-                 MODULE_CFLAG += -DKVER34
-                 MODULE_CFLAG += -DKVER32
-             MODULE_CFLAG += -DLNX26_22
diff --git a/package/kernel/qca-ssdk/patches/101-hsl_phy-add-support-for-detection-PSGMII-PHY-mode.patch b/package/kernel/qca-ssdk/patches/101-hsl_phy-add-support-for-detection-PSGMII-PHY-mode.patch
index c27902c4ce..9d028992a7 100644
--- a/package/kernel/qca-ssdk/patches/101-hsl_phy-add-support-for-detection-PSGMII-PHY-mode.patch
+++ b/package/kernel/qca-ssdk/patches/101-hsl_phy-add-support-for-detection-PSGMII-PHY-mode.patch
@@ -13,7 +13,7 @@ Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
 
 --- a/src/hsl/phy/hsl_phy.c
 +++ b/src/hsl/phy/hsl_phy.c
-@@ -1335,6 +1335,9 @@ hsl_port_phydev_interface_mode_status_ge
+@@ -1322,6 +1322,9 @@ hsl_port_phydev_interface_mode_status_ge
  		case PHY_INTERFACE_MODE_10GKR:
  			*interface_mode_status = PORT_10GBASE_R;
  			break;
diff --git a/package/kernel/qca-ssdk/patches/102-qca-ssdk-support-selecting-PCS-channel-for-PORT3-on-.patch b/package/kernel/qca-ssdk/patches/102-qca-ssdk-support-selecting-PCS-channel-for-PORT3-on-.patch
index 5e390d8ee3..db84ea1422 100644
--- a/package/kernel/qca-ssdk/patches/102-qca-ssdk-support-selecting-PCS-channel-for-PORT3-on-.patch
+++ b/package/kernel/qca-ssdk/patches/102-qca-ssdk-support-selecting-PCS-channel-for-PORT3-on-.patch
@@ -24,15 +24,15 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
 
 --- a/include/init/ssdk_dts.h
 +++ b/include/init/ssdk_dts.h
-@@ -101,6 +101,7 @@ typedef struct
+@@ -99,6 +99,7 @@ typedef struct
  	a_uint32_t emu_chip_ver; /*only valid when is_emulation is true*/
  	a_uint32_t clk_mode;
  	a_uint32_t pcie_hw_base;
 +	a_uint32_t port3_pcs_channel;
+ 	led_ctrl_pattern_t source_pattern[SSDK_MAX_PORT_NUM][PORT_LED_SOURCE_MAX];
  } ssdk_dt_cfg;
  
- #define SSDK_MAX_NR_ETH 6
-@@ -162,6 +163,7 @@ a_uint32_t ssdk_device_id_get(a_uint32_t
+@@ -161,6 +162,7 @@ a_uint32_t ssdk_device_id_get(a_uint32_t
  struct device_node *ssdk_dts_node_get(a_uint32_t dev_id);
  struct clk *ssdk_dts_essclk_get(a_uint32_t dev_id);
  struct clk *ssdk_dts_cmnclk_get(a_uint32_t dev_id);
@@ -62,7 +62,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
  					cppe_port_mux_ctrl.bf.port4_pcs_sel =
 --- a/src/adpt/hppe/adpt_hppe_uniphy.c
 +++ b/src/adpt/hppe/adpt_hppe_uniphy.c
-@@ -1122,9 +1122,6 @@ __adpt_hppe_uniphy_psgmii_mode_set(a_uin
+@@ -1160,9 +1160,6 @@ __adpt_hppe_uniphy_psgmii_mode_set(a_uin
  {
  	a_uint32_t i;
  	sw_error_t rv = SW_OK;
@@ -72,7 +72,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
  
  	union uniphy_mode_ctrl_u uniphy_mode_ctrl;
  
-@@ -1134,9 +1131,7 @@ __adpt_hppe_uniphy_psgmii_mode_set(a_uin
+@@ -1172,9 +1169,7 @@ __adpt_hppe_uniphy_psgmii_mode_set(a_uin
  	SSDK_DEBUG("uniphy %d is psgmii mode\n", uniphy_index);
  #if defined(CPPE)
  	if (adpt_ppe_type_get(dev_id) == CPPE_TYPE) {
@@ -92,14 +92,14 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
 +a_uint32_t ssdk_dts_port3_pcs_channel_get(a_uint32_t dev_id)
 +{
 +	ssdk_dt_cfg* cfg = ssdk_dt_global.ssdk_dt_switch_nodes[dev_id];
-+	
++
 +	return cfg->port3_pcs_channel;
 +}
 +
- #ifndef BOARD_AR71XX
  #if defined(CONFIG_OF) && (LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0))
  static void ssdk_dt_parse_mac_mode(a_uint32_t dev_id,
-@@ -306,6 +313,25 @@ static void ssdk_dt_parse_mac_mode(a_uin
+ 		struct device_node *switch_node, ssdk_init_cfg *cfg)
+@@ -305,6 +312,25 @@ static void ssdk_dt_parse_mac_mode(a_uin
  
  	return;
  }
@@ -109,7 +109,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
 +{
 +	const __be32 *port3_pcs_channel;
 +	a_uint32_t len = 0;
-+	
++
 +	port3_pcs_channel = of_get_property(switch_node, "port3_pcs_channel", &len);
 +	if (!port3_pcs_channel) {
 +		ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port3_pcs_channel = 2;
@@ -125,7 +125,7 @@ Signed-off-by: Mantas Pucka <mantas at 8devices.com>
  #ifdef IN_UNIPHY
  static void ssdk_dt_parse_uniphy(a_uint32_t dev_id)
  {
-@@ -1292,6 +1318,7 @@ sw_error_t ssdk_dt_parse(ssdk_init_cfg *
+@@ -1347,6 +1373,7 @@ sw_error_t ssdk_dt_parse(ssdk_init_cfg *
  	rv = ssdk_dt_parse_access_mode(switch_node, ssdk_dt_priv);
  	SW_RTN_ON_ERROR(rv);
  	ssdk_dt_parse_mac_mode(*dev_id, switch_node, cfg);
diff --git a/package/kernel/qca-ssdk/patches/103-mdio-adapt-to-C22-and-C45-read-write-split.patch b/package/kernel/qca-ssdk/patches/103-mdio-adapt-to-C22-and-C45-read-write-split.patch
deleted file mode 100644
index 7ddca554ec..0000000000
--- a/package/kernel/qca-ssdk/patches/103-mdio-adapt-to-C22-and-C45-read-write-split.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From bdae481e89cbe551068a99028bb57119b59f5ff4 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko at gmail.com>
-Date: Tue, 26 Mar 2024 12:19:49 +0100
-Subject: [PATCH] mdio: adapt to C22 and C45 read/write split
-
-Kernel 6.3 has introduced separate C45 read/write operations, and thus
-split them out of the C22 operations completely so the old way of marking
-C45 reads and writes via the register value does not work anymore.
-
-This is causing SSDK to fail and find C45 only PHY-s such as Aquantia ones:
-[   22.187877] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 8, phy_id = 0x0 phytype doesn't match
-[   22.209924] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0x0 phytype doesn't match
-
-This in turn causes USXGMII MAC autoneg bit to not get set and then UNIPHY
-autoneg will time out, causing the 10G ports not to work:
-[   37.292784] uniphy autoneg time out!
-
-So, lets detect C45 reads and writes by the magic BIT(30) in the register
-argument and if so call separate C45 mdiobus read/write functions.
-
-Signed-off-by: Robert Marko <robimarko at gmail.com>
----
- include/init/ssdk_plat.h |  7 +++++++
- src/init/ssdk_plat.c     | 30 ++++++++++++++++++++++++++++++
- 2 files changed, 37 insertions(+)
-
---- a/include/init/ssdk_plat.h
-+++ b/include/init/ssdk_plat.h
-@@ -505,3 +505,10 @@ void ssdk_plat_exit(a_uint32_t dev_id);
- 
- #endif
- /*qca808x_end*/
-+
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,3,0))
-+#define MII_ADDR_C45		(1<<30)
-+#define MII_DEVADDR_C45_SHIFT	16
-+#define MII_DEVADDR_C45_MASK	GENMASK(20, 16)
-+#define MII_REGADDR_C45_MASK	GENMASK(15, 0)
-+#endif
---- a/src/init/ssdk_plat.c
-+++ b/src/init/ssdk_plat.c
-@@ -356,6 +356,18 @@ phy_addr_validation_check(a_uint32_t phy
- 		return A_TRUE;
- }
- 
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,3,0))
-+static inline u16 mdiobus_c45_regad(u32 regnum)
-+{
-+	return FIELD_GET(MII_REGADDR_C45_MASK, regnum);
-+}
-+
-+static inline u16 mdiobus_c45_devad(u32 regnum)
-+{
-+	return FIELD_GET(MII_DEVADDR_C45_MASK, regnum);
-+}
-+#endif
-+
- sw_error_t
- qca_ar8327_phy_read(a_uint32_t dev_id, a_uint32_t phy_addr,
-                            a_uint32_t reg, a_uint16_t* data)
-@@ -371,9 +383,18 @@ qca_ar8327_phy_read(a_uint32_t dev_id, a
- 	if (!bus)
- 		return SW_NOT_SUPPORTED;
- 	phy_addr = TO_PHY_ADDR(phy_addr);
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,3,0))
-+	mutex_lock(&bus->mdio_lock);
-+	if (reg & MII_ADDR_C45)
-+		*data = __mdiobus_c45_read(bus, phy_addr, mdiobus_c45_devad(reg), mdiobus_c45_regad(reg));
-+	else
-+		*data = __mdiobus_read(bus, phy_addr, reg);
-+	mutex_unlock(&bus->mdio_lock);
-+#else
- 	mutex_lock(&bus->mdio_lock);
- 	*data = __mdiobus_read(bus, phy_addr, reg);
- 	mutex_unlock(&bus->mdio_lock);
-+#endif
- 
- 	return 0;
- }
-@@ -393,9 +414,18 @@ qca_ar8327_phy_write(a_uint32_t dev_id,
- 	if (!bus)
- 		return SW_NOT_SUPPORTED;
- 	phy_addr = TO_PHY_ADDR(phy_addr);
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,3,0))
-+	mutex_lock(&bus->mdio_lock);
-+	if (reg & MII_ADDR_C45)
-+		__mdiobus_c45_write(bus, phy_addr, mdiobus_c45_devad(reg), mdiobus_c45_regad(reg), data);
-+	else
-+		__mdiobus_write(bus, phy_addr, reg, data);
-+	mutex_unlock(&bus->mdio_lock);
-+#else
- 	mutex_lock(&bus->mdio_lock);
- 	__mdiobus_write(bus, phy_addr, reg, data);
- 	mutex_unlock(&bus->mdio_lock);
-+#endif
- 
- 	return 0;
- }
diff --git a/package/kernel/qca-ssdk/patches/200-allow-parallel-build.patch b/package/kernel/qca-ssdk/patches/200-allow-parallel-build.patch
index 5635c2fdcf..6c28e0ff2e 100644
--- a/package/kernel/qca-ssdk/patches/200-allow-parallel-build.patch
+++ b/package/kernel/qca-ssdk/patches/200-allow-parallel-build.patch
@@ -40,7 +40,7 @@
  kslib_c:
 --- a/make/linux_opt.mk
 +++ b/make/linux_opt.mk
-@@ -777,6 +777,6 @@ LOCAL_CFLAGS += $(CPU_CFLAG) -D"KBUILD_M
+@@ -778,6 +778,6 @@ LOCAL_CFLAGS += $(CPU_CFLAG) -D"KBUILD_M
  ####################################################################
  # 			cflags for LNX Modules-Style Makefile
  ####################################################################
diff --git a/package/kernel/qca-ssdk/patches/201-fix-compile-warnings.patch b/package/kernel/qca-ssdk/patches/201-fix-compile-warnings.patch
new file mode 100644
index 0000000000..5b57f41975
--- /dev/null
+++ b/package/kernel/qca-ssdk/patches/201-fix-compile-warnings.patch
@@ -0,0 +1,31 @@
+--- a/src/fal/fal_port_ctrl.c
++++ b/src/fal/fal_port_ctrl.c
+@@ -2089,7 +2089,7 @@ fal_port_hibernate_get (a_uint32_t dev_i
+  */
+ sw_error_t
+ fal_port_cdt (a_uint32_t dev_id, fal_port_t port_id, a_uint32_t mdi_pair,
+-	      a_uint32_t * cable_status, a_uint32_t * cable_len)
++	      fal_cable_status_t * cable_status, a_uint32_t * cable_len)
+ {
+   sw_error_t rv;
+ 
+--- a/src/fal/fal_portvlan.c
++++ b/src/fal/fal_portvlan.c
+@@ -2173,7 +2173,7 @@ fal_netisolate_get(a_uint32_t dev_id, a_
+  * @return SW_OK or error code
+  */
+ sw_error_t
+-fal_eg_trans_filter_bypass_en_set(a_uint32_t dev_id, a_bool_t enable)
++fal_eg_trans_filter_bypass_en_set(a_uint32_t dev_id, a_uint32_t enable)
+ {
+     sw_error_t rv;
+ 
+@@ -2190,7 +2190,7 @@ fal_eg_trans_filter_bypass_en_set(a_uint
+  * @return SW_OK or error code
+  */
+ sw_error_t
+-fal_eg_trans_filter_bypass_en_get(a_uint32_t dev_id, a_bool_t* enable)
++fal_eg_trans_filter_bypass_en_get(a_uint32_t dev_id, a_uint32_t* enable)
+ {
+     sw_error_t rv;
+ 




More information about the lede-commits mailing list