[openwrt/openwrt] mediatek: add firmware name for AQR PHYs on mt7988a-rfb

[LEDE Commits]

nbd pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/ba245d6bca4724506c4003166fc768a906fca3fb

commit ba245d6bca4724506c4003166fc768a906fca3fb
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Fri May 10 17:39:56 2024 +0200

    mediatek: add firmware name for AQR PHYs on mt7988a-rfb
    
    Fixes PHY probe in case there is no firmware in a connected EEPROM
    
    Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
 .../files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso     | 1 +
 .../files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso     | 1 +
 2 files changed, 2 insertions(+)

diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
index d21a61ad19..c471b9ed91 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso
@@ -22,6 +22,7 @@
 			phy0: ethernet-phy at 0 {
 				reg = <0>;
 				compatible = "ethernet-phy-ieee802.3-c45";
+				firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
 				reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>;
 				reset-assert-us = <100000>;
 				reset-deassert-us = <221000>;
diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
index 140391fc45..1490f055b5 100644
--- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
+++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso
@@ -22,6 +22,7 @@
 			phy8: ethernet-phy at 8 {
 				reg = <8>;
 				compatible = "ethernet-phy-ieee802.3-c45";
+				firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld";
 				reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>;
 				reset-assert-us = <100000>;
 				reset-deassert-us = <221000>;