November 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Nov 1 07:58:52 EDT 2013
Ending: Fri Nov 29 14:34:27 EST 2013
Messages: 382

• [PATCH 4/5] ppc: DA923RC: add board support   Sascha Hauer
• [PATCH 4/5] ppc: DA923RC: add board support   Renaud Barbier
• [PATCH 4/5] ppc: DA923RC: add board support   Renaud Barbier
• [PATCH 4/5] ppc: DA923RC: add board support   Renaud Barbier
• [PATCH 4/5] ppc: DA923RC: add board support   Sascha Hauer
• [PATCH 1/1] bcm2835: move mci register at board level   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] bcm2835: move mci register at board level   Alexander Aring
• [PATCH] don't scan bbt if CONFIG_NAND_BBT not set   张忠山
• [PATCH 1/1] bcm2835: move mci register at board level   Sascha Hauer
• [PATCH] don't scan bbt if CONFIG_NAND_BBT not set   Sascha Hauer
• barebox on i.MX53 in serial downloader boot mode   Wjatscheslaw Stoljarski (Slawa)
• barebox on i.MX53 in serial downloader boot mode   Eric Bénard
• bootspec work   Sascha Hauer
• [PATCH 01/11] kernel-install: Add missing error messages   Sascha Hauer
• [PATCH 02/11] blspec: Push device_detect into blspec_scan_device   Sascha Hauer
• [PATCH 03/11] blspec: rename _hwdevice functions to _devicename   Sascha Hauer
• [PATCH 04/11] blspec: Allow to boot partitions   Sascha Hauer
• [PATCH 05/11] blspec: Let scan functions return the number of entries found   Sascha Hauer
• [PATCH 06/11] fs: Add function to get cdev by mountpath   Sascha Hauer
• [PATCH 07/11] blspec: make cdev optional   Sascha Hauer
• [PATCH 08/11] boot: Print boot entries in the order they are   Sascha Hauer
• [PATCH 09/11] boot command: make more flexible   Sascha Hauer
• [PATCH 10/11] blspec: Make error message more clear   Sascha Hauer
• [PATCH 11/11] boot command: Add timeout support for menu   Sascha Hauer
• [PATCH 1/2] USB: i.MX: Make DT dr_mode & phy_type parameters kernel compatible   Sascha Hauer
• barebox on i.MX53 in serial downloader boot mode   Wjatscheslaw Stoljarski (Slawa)
• barebox on i.MX53 in serial downloader boot mode   Eric Bénard
• barebox on i.MX53 in serial downloader boot mode   Wjatscheslaw Stoljarski (Slawa)
• barebox on i.MX53 in serial downloader boot mode   Eric Bénard
• barebox on i.MX53 in serial downloader boot mode   Wjatscheslaw Stoljarski (Slawa)
• [PATCH 4/5] ppc: DA923RC: add board support   Renaud Barbier
• [PATCH 07/11] blspec: make cdev optional   Alexander Aring
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Andre Heider
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Andre Heider
• [PATCH v2 2/6] gui: convert graphic utils to respect line_length   Andre Heider
• [PATCH v2 3/6] gui: convert the bmp renderer to respect line_length   Andre Heider
• [PATCH v2 4/6] ARM: bcm2835: add missing mbox overscan response field   Andre Heider
• [PATCH v2 5/6] video: add a BCM2835 framebuffer driver   Andre Heider
• [PATCH v2 6/6] video: set up the kernel's simple framebuffer driver   Andre Heider
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Alexander Aring
• [PATCH 4/5] ppc: DA923RC: add board support   Sascha Hauer
• [PATCH 07/11] blspec: make cdev optional   Sascha Hauer
• barebox on i.MX53 in serial downloader boot mode   Sascha Hauer
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Sascha Hauer
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Alexander Aring
• [PATCH 07/11] blspec: make cdev optional   Alexander Aring
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Andre Heider
• [PATCH v2 1/6] fb: add a line_length value to struct fb_info   Alexander Aring
• barebox on i.MX53 in serial downloader boot mode   Wjatscheslaw Stoljarski (Slawa)
• [PATCH 0/3] Support for Voipac X53-DMM-668 module and Voipac Baseboard   Rostislav Lisovy
• [PATCH 1/3] ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux   Rostislav Lisovy
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Rostislav Lisovy
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read from Devicetree   Rostislav Lisovy
• [PATCH v3 0/5] GEIP DA923RC board support   Renaud Barbier
• [PATCH 1/5] ppc: mpc85xx: mpc8544 support   Renaud Barbier
• [PATCH 2/5] ppc: mpc85xx: define Ethernet port count   Renaud Barbier
• [PATCH 3/5] ppc: mpc85xx: enable DDR driver   Renaud Barbier
• [PATCH 4/5] ppc: DA923RC: add board support   Renaud Barbier
• [PATCH 5/5] ppc: mpc85xx: build directives   Renaud Barbier
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Pavel Pisa
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Sascha Hauer
• dt-bindings status   Alexander Shiyan
• [PATCH] of: Add a context pointer to fixup functions   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Sascha Hauer
• dt-bindings status   Sascha Hauer
• barebox on i.MX53 in serial downloader boot mode   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Alexander Aring
• [PATCH v3 0/5] GEIP DA923RC board support   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Alexander Aring
• [RFC] FPGA: add a simple framework for firmware programming   Juergen Beisert
• [PATCH 1/3] FPGA: add a simple programming handler framework   Juergen Beisert
• [PATCH 2/3] FPGA: add a programming command   Juergen Beisert
• [PATCH 3/3] FPGA: provide a handler to program ALTERA FPGAs   Juergen Beisert
• Re: [PATCH 1/3] FPGA: add a simple programming handler framework   Alexander Shiyan
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Andre Heider
• how to append something to a text file   zzs
• [PATCH] rm vim swap file in genenv   张忠山
• how to create a new file under barebox prompt   zzs
• how to create a new file under barebox prompt   Alexander Aring
• how to append something to a text file   Alexander Aring
• [PATCH] rm vim swap file in genenv   Alexander Aring
• how to create a new file under barebox prompt   Alexander Aring
• [PATCH] dlmalloc: fix compiler warning   Alexander Aring
• [PATCH] dlmalloc: fix compiler warning   Sascha Hauer
• v2013.11.0 and v2013.10.1   Sascha Hauer
• howto load/save envfs from linux   zzs
• howto load/save envfs from linux   Jan Lübbe
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] blspec: Fix another crash with menu disabled   Uwe Kleine-König
• [PATCH] mci: mxs: support overwriting the device name via platform data   Uwe Kleine-König
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Sascha Hauer
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Lucas Stach
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mci: mxs: support overwriting the device name via platform data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mci: mxs: support overwriting the device name via platform data   Uwe Kleine-König
• [PATCH] blspec: fix documention of blspec_scan_directory's return code   Uwe Kleine-König
• [PATCH] partitions: dos: don't open code get_unaligned_le32   Uwe Kleine-König
• [PATCH] partitions: dos: improve guess of disk size   Uwe Kleine-König
• [PATCH] partitions: dos: parse extended partition   Uwe Kleine-König
• [PATCH] partitions: dos: improve guess of disk size   Uwe Kleine-König
• [PATCH] partitions: dos: parse extended partition   Uwe Kleine-König
• [PATCH] partitions: dos: improve guess of disk size   Alexander Aring
• Howto read file to a VAR   zzs
• [SPAM] [PATCH 2/3] FPGA: add a programming command   Sascha Hauer
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read from Devicetree   Sascha Hauer
• [PATCH v2] partitions: dos: improve guess of disk size   Uwe Kleine-König
• [PATCH v2] partitions: dos: parse extended partition   Uwe Kleine-König
• dt-bindings status   Sebastian Hesselbarth
• [PATCH 1/2] of: fdt: Fix fdt size_dt_struct   Sascha Hauer
• [PATCH 2/2] of: fdt: reorder fdt_header initialization   Sascha Hauer
• [PATCH] treewide: Add missing includes   Sascha Hauer
• [PATCH] eeprom: at24: Enable OF partition parsing   Sascha Hauer
• [PATCH] ARM: Phytec pfla02: Add I2C EEPROM to devicetree   Sascha Hauer
• [PATCH v2] partitions: dos: improve guess of disk size   Sascha Hauer
• [PATCH] blspec: fix documention of blspec_scan_directory's return code   Sascha Hauer
• [PATCH] partitions: dos: don't open code get_unaligned_le32   Sascha Hauer
• [PATCH v2] partitions: dos: parse extended partition   Sascha Hauer
• [PATCH] ARM: remove asm/hardware.h   Sascha Hauer
• [PATCH 1/6] ARM: at91: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH] Cleanup Kconfig files   Alexander Shiyan
• [PATCH] net/Kconfig: Remove non-existent ARCH_DAVINCI   Alexander Shiyan
• [PATCH 2/6] ARM: mxs: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH 3/6] commands: nandtest: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH 4/6] net: netx: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH 5/6] gui: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH 6/6] imx-usb-loader: Fix signed/unsigned arguments for printf   Alexander Shiyan
• [PATCH 0/2] x86 minor fixes and questions   Thomas Petazzoni
• [PATCH 1/2] scripts/setupmbr: fix documentation   Thomas Petazzoni
• [PATCH 2/2] arch/x86: fix link with recent gcc   Thomas Petazzoni
• [PATCH 1/2] scripts: Add fix_size & kernel-install to .gitignore   Alexander Shiyan
• [PATCH 2/2] Makefile: Align "DTB" string to others   Alexander Shiyan
• [PATCH 0/4] gpiolib debug and led trigger fixes   Sebastian Hesselbarth
• [PATCH 1/4] led: trigger: disable LEDs with trigger before installing it   Sebastian Hesselbarth
• [PATCH 2/4] gpiolib: add get_direction callback   Sebastian Hesselbarth
• [PATCH 3/4] gpiolib: make gpiolib command more verbose   Sebastian Hesselbarth
• [PATCH 4/4] gpio: dw: add get_direction callback   Sebastian Hesselbarth
• [PATCH 0/5] OF: probe clock providers from DT   Sebastian Hesselbarth
• [PATCH 1/5] asm-generic: add macro for BAREBOX_CLK_TABLE   Sebastian Hesselbarth
• [PATCH 2/5] ARM: lib: add BAREBOX_CLK_TABLE to linker script   Sebastian Hesselbarth
• [PATCH 3/5] clk: add of_clk_init and CLK_OF_DECLARE macro   Sebastian Hesselbarth
• [PATCH 4/5] OF: parse OF clock providers after populate   Sebastian Hesselbarth
• [PATCH 5/5] clk: fixed: add DT init function   Sebastian Hesselbarth
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read from Devicetree   Rostislav Lisovy
• [PATCH 3/4] gpiolib: make gpiolib command more verbose   Alexander Aring
• [PATCH 1/6] ARM: at91: Fix signed/unsigned arguments for printf   Sascha Hauer
• [PATCH 0/2] x86 minor fixes and questions   Sascha Hauer
• [PATCH 1/2] scripts: Add fix_size & kernel-install to .gitignore   Sascha Hauer
• [PATCH 3/4] gpiolib: make gpiolib command more verbose   Sascha Hauer
• [PATCH 3/4] gpiolib: make gpiolib command more verbose   Alexander Aring
• [PATCH 0/5] OF: probe clock providers from DT   Sascha Hauer
• [PATCH 0/2] x86 minor fixes and questions   Thomas Petazzoni
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read from Devicetree   Sascha Hauer
• [PATCH] blspec: Fix another crash with menu disabled   Sascha Hauer
• [PATCH] mci: mxs: support overwriting the device name via platform data   Sascha Hauer
• [PATCH 1/2] ARM: i.MX boards: Remove useless select   Alexander Shiyan
• [PATCH 2/2] ARM: i.MX boards: Remove duplicate dependency of ARCH_IMX21 for IMX_IIM   Alexander Shiyan
• handling script/init errors   Marc Reilly
• handling script/init errors   Sascha Hauer
• handling script/init errors   Marc Reilly
• handling script/init errors   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Andre Heider
• hush patches   Sascha Hauer
• [PATCH 01/10] hush: fix exit on syntax error behaviour   Sascha Hauer
• [PATCH 02/10] hush: refactor readline call   Sascha Hauer
• [PATCH 03/10] readline: remove unused variable   Sascha Hauer
• [PATCH 04/10] hush: refactor get_user_input()   Sascha Hauer
• [PATCH 05/10] hush: refactor file_get()   Sascha Hauer
• [PATCH 06/10] hush: rename __promptme to interrupt   Sascha Hauer
• [PATCH 07/10] consolidate syntax() and syntax_err()   Sascha Hauer
• [PATCH 08/10] hush: Be more informative on syntax error   Sascha Hauer
• [PATCH 09/10] hush: use standard ARRAY_SIZE   Sascha Hauer
• [PATCH 10/10] hush: refactor reserved_word()   Sascha Hauer
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Sascha Hauer
• No subject   Sascha Hauer
• [PATCH 1/4] Add a Firmware programming framework   Sascha Hauer
• [PATCH 2/4] Firmware: provide a handler to program Altera FPGAs   Sascha Hauer
• [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode   Sascha Hauer
• [PATCH 4/4] Firmware: socfpga: Add SoCFPGA FPGA program support   Sascha Hauer
• [PATCH 2/4] Firmware: provide a handler to program Altera FPGAs   Jürgen Beisert
• [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode   Jürgen Beisert
• [PATCH 2/4] Firmware: provide a handler to program Altera FPGAs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode   Kumar Gala
• [PATCH 1/2] scripts: kwboot: fix missing soh initialization   Sebastian Hesselbarth
• [PATCH 2/2] scripts: kwbimage: fix mis-sized payload   Sebastian Hesselbarth
• [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode   Sascha Hauer
• [PATCH 0/3 v2] Support for Voipac X53-DMM-668 module and Voipac Baseboard   Rostislav Lisovy
• [PATCH 1/3] ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux   Rostislav Lisovy
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Rostislav Lisovy
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board with X53-DMM-668 module.   Rostislav Lisovy
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board. Device definition is read from Devicetree   Rostislav Lisovy
• [PATCH 0/3 v2] Support for Voipac X53-DMM-668 module and Voipac Baseboard   Rostislav Lisovy
• howto write to serial port   zzs
• [PATCH 1/2] ARM: i.MX boards: Remove useless select   Sascha Hauer
• [PATCH 0/3 v2] Support for Voipac X53-DMM-668 module and Voipac Baseboard   Sascha Hauer
• handling script/init errors   Marc Reilly
• howto write to serial port   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] Firmware: provide a handler to program Altera FPGAs   Sascha Hauer
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Sascha Hauer
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board with X53-DMM-668 module.   Sascha Hauer
• [PATCH 2/4] Firmware: provide a handler to program Altera FPGAs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] DA923RC: add PCI support   Renaud Barbier
• [PATCH 1/2] ppc: mpc85xx: add fsl,mpic node frequency property   Renaud Barbier
• [PATCH 2/2] ppc: DA923RC: update board initialisation   Renaud Barbier
• [PATCH v2 0/6] BCM2835 / simple framebuffer support   Andre Heider
• [PATCH] barebox: remove double semicolons   Alexander Aring
• [PATCH] barebox: remove double semicolons   Alexander Aring
• [PATCH] mmci: remove include of mmci.h header   Alexander Aring
• [PATCH] mmci: remove include of mmci.h header   Sascha Hauer
• [PATCH] barebox: remove double semicolons   Sascha Hauer
• handling script/init errors   Sascha Hauer
• [PATCH 0/2] DA923RC: add PCI support   Sascha Hauer
• [PATCH 1/2] scripts: kwboot: fix missing soh initialization   Sascha Hauer
• Lowlevel questions   Mathieu Anquetin
• [PATCH 1/6] ARM i.MX6: sabrelite: switch to multiboard support   Philipp Zabel
• [PATCH 2/6] ARM i.MX6: sabrelite: switch to multi image support   Philipp Zabel
• [PATCH 3/6] ARM i.MX6: sabrelite: use &uart2 instead of hard-coding path   Philipp Zabel
• [PATCH 4/6] ARM i.MX6: sabrelite: usb is probed from device tree   Philipp Zabel
• [PATCH 5/6] ARM i.MX6: sabrelite: move flash partitions into device tree   Philipp Zabel
• [PATCH 6/6] ARM i.MX6: sabrelite: register SPI flash barebox update handler   Philipp Zabel
• Re: [PATCH 4/6] ARM i.MX6: sabrelite: usb is probed from device tree   Alexander Shiyan
• dt-bindings status   Sascha Hauer
• [PATCH 1/2] scripts: fix kernel-install-target config   Alexander Aring
• [PATCH 2/2] common: add dependency !SANDBOX on target tools   Alexander Aring
• [PATCH 1/2] scripts: fix kernel-install-target config   Alexander Aring
• Lowlevel questions   Sascha Hauer
• Lowlevel questions   Alexander Aring
• Lowlevel questions   Mathieu Anquetin
• Lowlevel questions   Sascha Hauer
• kwboot Preamble only feature   Matthew Minter
• [PATCH 4/6] ARM i.MX6: sabrelite: usb is probed from device tree   Sascha Hauer
• [PATCH 1/2] scripts: fix kernel-install-target config   Sascha Hauer
• [PATCH 0/2] fix net console support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] console: add is_ready callbback support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] net: netconsole: add is_ready support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3 v3] Support for Voipac X53-DMM-668 module and Voipac Baseboard   Rostislav Lisovy
• [PATCH 1/3] ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux   Rostislav Lisovy
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Rostislav Lisovy
• [PATCH 3/3] ARM: i.mx53: Support for Voipac board with X53-DMM-668 module.   Rostislav Lisovy
• [RFC] [PATCH 0/3] ARM: machine struct support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: introduce machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] at91: detect SoC earlier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] AT91: usb-a926x: switch to machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: introduce machine description   Alexander Aring
• kwboot Preamble only feature   Thomas Petazzoni
• [PATCH] Added -j option to kwboot to allow just sending the boot preamble   Matthew Minter
• [PATCH 1/2] gpio: unify gpio direction macros names with Linux kernel   Antony Pavlov
• [PATCH 2/2] gpiolib: import gpio_request_array() from linux 3.7   Antony Pavlov
• [PATCH 1/2] console: add is_ready callbback support   Sascha Hauer
• [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Sascha Hauer
• [PATCH 2/2] gpiolib: import gpio_request_array() from linux 3.7   Sascha Hauer
• [PATCH 1/3] ARM: introduce machine description   Sascha Hauer
• [PATCH 2/2] gpiolib: import gpio_request_array() from linux 3.7   Antony N. Pavlov
• [PATCH 2/2] gpiolib: import gpio_request_array() from linux 3.7   Sebastian Hesselbarth
• Re: [PATCH 2/3] ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree   Alexander Shiyan
• Add devicetree support to OMAP drivers   Sascha Hauer
• [PATCH 01/17] serial: ns16550: Add device ids for omap   Sascha Hauer
• [PATCH 02/17] pinctrl: Add pinctrl-single driver   Sascha Hauer
• [PATCH 03/17] spi: omap: encode register offset into device_id   Sascha Hauer
• [PATCH 04/17] spi: omap: Add devicetree probe support   Sascha Hauer
• [PATCH 05/17] i2c: omap: Add devicetree support   Sascha Hauer
• [PATCH 06/17] net: cpsw: inline slave_data   Sascha Hauer
• [PATCH 07/17] cpsw: Add devicetree probe support   Sascha Hauer
• [PATCH 08/17] net: cpsw: move eth_device into slave   Sascha Hauer
• [PATCH 09/17] net: cpsw: drop for_each_slave   Sascha Hauer
• [PATCH 10/17] net: cpsw: attach slave to edev->priv   Sascha Hauer
• [PATCH 11/17] net: cpsw: straighten error path   Sascha Hauer
• [PATCH 12/17] gpio: omap: move to drivers/gpio/   Sascha Hauer
• [PATCH 13/17] omap: gpmc: some refactoring   Sascha Hauer
• [PATCH 14/17] gpio: omap: Add devicetree probe support   Sascha Hauer
• [PATCH 15/17] mtd: omap gpmc: Use dev_add_param_enum   Sascha Hauer
• [PATCH 16/17] bus: Add omap gpmc driver   Sascha Hauer
• [PATCH 17/17] mmc: omap: Add devicetree support   Sascha Hauer
• OMAP: devicetree preparation patches   Sascha Hauer
• [PATCH 01/16] ARM: OMAP: select SoC variant from boards   Sascha Hauer
• [PATCH 02/16] ARM: OMAP: Add SoC prefix to running_in_* functions   Sascha Hauer
• [PATCH 03/16] ARM: OMAP: select correct reset_cpu function at runtime   Sascha Hauer
• [PATCH 04/16] ARM: OMAP: Make cpu_is_* macros runtime if necessary   Sascha Hauer
• [PATCH 05/16] ARM: dtb: create dt-bindings link   Sascha Hauer
• [PATCH 06/16] dt-bindings: Add gpio header file   Sascha Hauer
• [PATCH 07/16] dt-bindings: Add omap/am33xx pinctrl header file   Sascha Hauer
• [PATCH 08/16] images: socfpga: Do not pollute Make variable namespace   Sascha Hauer
• [PATCH 09/16] ARM: Add am33xx SoC dtsi file   Sascha Hauer
• [PATCH 10/16] ARM: am335x: Add reg-shift property to uarts   Sascha Hauer
• [PATCH 11/16] ARM: dts: AM33xx: Add gpio aliases   Sascha Hauer
• [PATCH 12/16] ARM: am33xx: Add am33xx_ prefix to SoC specific functions   Sascha Hauer
• [PATCH 13/16] ARM: OMAP: Make debug_ll UART Kconfig selectable   Sascha Hauer
• [PATCH 14/16] ARM: OMAP: centralize omap startup   Sascha Hauer
• [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Sascha Hauer
• [PATCH 16/16] ARM: OMAP: let UART selection depend on its only user   Sascha Hauer
• [PATCH] net: phy: Fix get_phy_device return value   Sascha Hauer
• [PATCH] of: gpio: Add Kconfig variable to depend on   Sascha Hauer
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Sascha Hauer
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Alexander Aring
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Sascha Hauer
• [PATCH] of: gpio: Add Kconfig variable to depend on   Alexander Aring
• [PATCH next] of: gpio: add missing type of config symbol   Alexander Aring
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: introduce machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] OMAP4: fix writel data/address swap regression   Vicente Bergas
• [PATCH 2/2] OMAP4: fix omap4_bootsource regression   Vicente Bergas
• [PATCH 1/2] OMAP4: fix writel data/address swap regression   Alexander Aring
• [PATCH 2/2] OMAP4: fix omap4_bootsource regression   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] OMAP4: fix writel data/address swap regression   Sascha Hauer
• [PATCH 1/2] OMAP4: fix writel data/address swap regression   Alexander Aring
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Sascha Hauer
• [PATCH] ARM: dts: am33xx: Add mmc aliases   Sascha Hauer
• [PATCH] mmc: omap: name mmc device after devicetree alias   Sascha Hauer
• [SPAM] [PATCH 15/16] ARM: am33xx: compile SoC files for pbl aswell   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mips start.S: using marco EXPORT(_start) result _start symbol can not be found in System.map   Kevin Du Huanpeng
• [PATCH] mips start.S: using marco EXPORT(_start) result _start symbol can not be found in System.map   Kevin Du Huanpeng
• [PATCH] commands: of_node fix descripion   Jan Weitzel
• [PATCH v2] OMAP gpmc bus driver support   Sascha Hauer
• [PATCH 1/3] string: Add (x)memdup   Sascha Hauer
• [PATCH 2/3] device: Add functions to add resources   Sascha Hauer
• [PATCH 3/3] bus: Add omap gpmc driver   Sascha Hauer
• [PATCH 1/2] common Kconfig: Add missing depends on   Sascha Hauer
• [PATCH 2/2] common Kconfig: disable unused options for SHELL_NONE   Sascha Hauer
• [PATCH] ARM: start: fix fdt inside valid memory check   Sascha Hauer
• [PATCH] AM33xx devicetree support   Sascha Hauer
• [PATCH 01/17] ARM: Make multi images startup process simpler   Sascha Hauer
• [PATCH 02/17] ARM: Make ENTRY_FUNCTION more robust   Sascha Hauer
• [PATCH 03/17] ARM: Add base am335x-phytec-phycore devicetree file   Sascha Hauer
• [PATCH 04/17] ARM: am335x phytec phyCORE: Switch to devicetree probe support   Sascha Hauer
• [PATCH 05/17] ARM: am33xx Phytec phyCORE: initialize debug UART   Sascha Hauer
• [PATCH 06/17] ARM: am33xx Phytec phyCORE: Switch to multiimage support   Sascha Hauer
• [PATCH 07/17] ARM: am33xx Phytec phyCORE: update defconfig   Sascha Hauer
• [PATCH 08/17] ARM: dts: Add am33xx beaglebone(black) dts files   Sascha Hauer
• [PATCH 09/17] ARM: am33xx: beaglebone: remove mlo_large_defconfig   Sascha Hauer
• [PATCH 10/17] ARM: beaglebone: Add memory to devicetrees   Sascha Hauer
• [PATCH 11/17] ARM: beaglebone: Switch to devicetree and multiimage   Sascha Hauer
• [PATCH 12/17] ARM: am335x Phytec phyCORE: Move partition descriptions to devicetree   Sascha Hauer
• [PATCH 13/17] ARM: OMAP: Safe boot info in fixed SRAM address   Sascha Hauer
• [PATCH 14/17] ARM: am335x Phytec phyCORE: configure environment from devicetree   Sascha Hauer
• [PATCH 15/17] ARM: beaglebone: configure console from devicetree   Sascha Hauer
• [PATCH 16/17] ARM: OMAP: introduce multiboard support and move am33xx boards to it   Sascha Hauer
• [PATCH 17/17] ARM: OMAP: consolidate am335x mlo defconfigs   Sascha Hauer
• [PATCH 04/17] ARM: am335x phytec phyCORE: Switch to devicetree probe support   Alexander Aring
• [PATCH] commands: of_node fix descripion   Sascha Hauer
• [PATCH 04/17] ARM: am335x phytec phyCORE: Switch to devicetree probe support   Sascha Hauer
• [PATCH] of: gpio: Add Kconfig variable to depend on   Sascha Hauer
• [PATCH] Make cpsw work again on latest beaglebone devicetree conversion   Sascha Hauer
• [PATCH 1/2] pinctrl: Add functions to select pinctrl from device_node   Sascha Hauer
• [PATCH 2/2] fixup! cpsw: Add devicetree probe support   Sascha Hauer
• [PATCH] Fix endless loop in automount code   Sascha Hauer
• FW: Barebox on Karo TX25   John Parker
• [PATCH 1/2] ARM: imx: karo tx25: Add config file for imx-image   Sascha Hauer
• [PATCH 2/2] scripts: imx-image: Add i.MX25 support   Sascha Hauer
• FW: Barebox on Karo TX25   Sascha Hauer
• FW: Barebox on Karo TX25   John Parker
• [PATCH 1/2] ARM: imx: karo tx25: Add config file for imx-image   John Parker
• FW: Barebox on Karo TX25   John Parker
• FW: Barebox on Karo TX25   John Parker
• Barebox on Karo TX25   Eric Bénard
• Barebox on Karo TX25   Sascha Hauer
• FW: Barebox on Karo TX25   Sascha Hauer
• [PATCH] mmci: add missing depends on ARM_AMBA   Alexander Aring
• Barebox on Karo TX25   Alexander Aring
• Barebox on Karo TX25   Sascha Hauer
• Barebox on Karo TX25   Alexander Aring
• [PATCH 1/1] vexpress: fix smc911x in defconfig   Jean-Christophe PLAGNIOL-VILLARD
• FW: Barebox on Karo TX25   John Parker
• FW: Barebox on Karo TX25   Baruch Siach
• [PATCH 0/6] ARM: machine struct support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] arm: gen-mach-types: add MAX_MACH_TYPE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: introduce machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: introduce SoC description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] AT91: detect SoC earlier   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] AT91: switch to machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] vexpress: switch to machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: introduce machine description   Alexander Aring
• [PATCH 2/6] ARM: introduce machine description   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: introduce machine description   Alexander Aring
• FW: Barebox on Karo TX25   John Parker
• FW: Barebox on Karo TX25   Sascha Hauer
• FW: Barebox on Karo TX25   John Parker
• FW: Barebox on Karo TX25   John Parker
• [PATCH] ARM: i.MX6: add initial support for SolidRun Cubox-i Carrier-1   Lucas Stach
• Re: [PATCH] ARM: i.MX6: add initial support for SolidRun Cubox-i Carrier-1   Alexander Shiyan

Last message date: Fri Nov 29 14:34:27 EST 2013
Archived on: Fri Nov 29 14:34:54 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...