FW: Barebox on Karo TX25

Sascha Hauer s.hauer at pengutronix.de
Wed Nov 27 16:01:16 EST 2013

On Wed, Nov 27, 2013 at 03:49:49PM +0000, John Parker wrote:
> Hi
> I have a barebox prompt running from RAM!!
> What next?

Setup a tftp server, edit /env/network/eth0 to your liking using
'edit /env/network/eth0', do a 'saveenv' to safe your settings.
Test your network with:

cp /mnt/tftp/barebox.bin /barebox.bin

If that works you can do:

erase /dev/nand0.barebox.bb
cp /barebox.bin /dev/nand0.barebox.bb

(Note: you have to use barebox-flash-image as generated by the
compilation, not the imx-image you generated for USB boot)

That should be it. After a reset your board should come up with barebox.


Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

More information about the barebox mailing list