[PATCH 1/2] ARM: imx: karo tx25: Add config file for imx-image

[John Parker]

Hi Sascha

Has something strange happened to the wrapping In this file?

Regards

John

-----Original Message-----
From: barebox [mailto:barebox-bounces at lists.infradead.org] On Behalf Of Sascha Hauer
Sent: 27 November 2013 12:56
To: barebox at lists.infradead.org
Subject: [PATCH 1/2] ARM: imx: karo tx25: Add config file for imx-image

Currently unused in barebox, but useful for bootstrapping a tx25 from USB where a imx-image is needed.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/karo-tx25/flash-header-tx25.imxcfg | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 arch/arm/boards/karo-tx25/flash-header-tx25.imxcfg

diff --git a/arch/arm/boards/karo-tx25/flash-header-tx25.imxcfg b/arch/arm/boards/karo-tx25/flash-header-tx25.imxcfg
new file mode 100644
index 0000000..2345f18
--- /dev/null
+++ b/arch/arm/boards/karo-tx25/flash-header-tx25.imxcfg
@@ -0,0 +1,23 @@
+#
+# currently unused in barebox, but useful to generate # a imx-image to 
+use with imx-usb-loader # soc imx25 loadaddr 0x80000000 dcdofs 0x400 wm 
+32 0xb8001010 0x00000002 wm 32 0xb8001004 0x00095728 wm 32 0xb8001000 
+0x92116480 wm 32 0x80000400 0x92116480 wm 32 0xb8001000 0xa2116480 wm 
+32 0xb8001000 0xb2116480 wm 8 0x80000033 0x80 wm 32 0xb8001000 
+0x82116480
+
+wm 32 0xb800100c 0x00095728
+wm 32 0xb8001008 0x92116480
+wm 32 0x80000400 0x92116480
+wm 32 0xb8001008 0xa2116480
+wm 32 0xb8001008 0xb2116480
+wm 8 0x90000033 0x80
+wm 32 0xb8001008 0x82116480
--
1.8.4.3


_______________________________________________
barebox mailing list
barebox at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox