August 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Aug 4 04:46:00 EDT 2013
Ending: Sat Aug 31 11:54:22 EDT 2013
Messages: 258

• [PATCH 0/2] resurrect CONFIG_PANIC_HANG option   Antony Pavlov
  • [PATCH 2/2] CONFIG_PANIC_HANG: replace #ifdef with IS_ENABLED()   Antony Pavlov
  • [PATCH 0/2] resurrect CONFIG_PANIC_HANG option   Sascha Hauer
• [PATCH 1/2] resurrect CONFIG_PANIC_HANG option   Antony Pavlov
• [PATCH] pbl: add generated file piggy.lz4 to .gitignore   Antony Pavlov
  • [PATCH] pbl: add generated file piggy.lz4 to .gitignore   Sascha Hauer
• [RFC 0/5] JUST-FOR-FUN: run barebox on Canon digital camera   Antony Pavlov
  • [RFC 1/5] ARM: add very initial support for Canon DIGIC chips   Antony Pavlov
  • [RFC 2/5] ARM: DIGIC: add Canon EOS 600D support   Antony Pavlov
  • [RFC 3/5] ARM: DIGIC: add Canon PowerShot A1100 IS support   Antony Pavlov
  • [RFC 4/5] ARM: DIGIC: add canon-600d_defconfig   Antony Pavlov
  • [RFC 5/5] ARM: DIGIC: add canon-a1100_defconfig   Antony Pavlov
  • [RFC 0/5] JUST-FOR-FUN: run barebox on Canon digital camera   Sascha Hauer
    • [RFC 0/5] JUST-FOR-FUN: run barebox on Canon digital camera   Antony Pavlov
• [PATCH 0/2] ppc 85xx: remove early local bus initialisation   Sascha Hauer
• v2013.08.0   Sascha Hauer
  • Re: v2013.08.0   Alexander Shiyan
    • v2013.08.0   Sascha Hauer
      • Re: v2013.08.0   Alexander Shiyan
      • Re: v2013.08.0   Alexander Shiyan
      • v2013.08.0   Sascha Hauer
• Commit "ARM: Turn most board directories into regular build directories" break kwb images   Thomas Petazzoni
  • Commit "ARM: Turn most board directories into regular build directories" break kwb images   Sascha Hauer
• [PATCH 1/4] ARM: OMAP: Pass TEXT_BASE address to mk-am35xx-spi-image   Teresa Gámez
  • [PATCH 2/4] ARM: OMAP: pcm051: Increase console output for MLO   Teresa Gámez
  • [PATCH 3/4] ARM: OMAP: pcm051: Update enviroment   Teresa Gámez
  • [PATCH 4/4] ARM: OMAP: pcm051: Create own NAND mux struct   Teresa Gámez
  • [PATCH 1/4] ARM: OMAP: Pass TEXT_BASE address to mk-am35xx-spi-image   Sascha Hauer
• [PATCH] UBIFS support   Sascha Hauer
  • [PATCH 2/8] mtd: ubi: add ubi info functions   Sascha Hauer
  • [PATCH 4/8] mtd: ubi: Add support for opening a volume by cdev   Sascha Hauer
  • [PATCH 8/8] fs: Add ubifs support   Sascha Hauer
    • [PATCH 8/8] fs: Add ubifs support   Alexander Aring
      • [PATCH 8/8] fs: Add ubifs support   Sascha Hauer
      • [PATCH 8/8] fs: Add ubifs support   Alexander Aring
• [PATCH 1/8] mtd: ubi: add missing prototype for ubi_volume_notify   Sascha Hauer
• [PATCH 3/8] filetype: Add ubifs detection   Sascha Hauer
• [PATCH 5/8] move print_hex_dump function to include/common.h   Sascha Hauer
• [PATCH 6/8] extend barebox wrapper header   Sascha Hauer
• [PATCH 7/8] Add deflate_decompress function   Sascha Hauer
• [PATCH] ARM: Create an assembly arm_cpu_lowlevel_init function   Sascha Hauer
• [PATCH] DFI FS700-FS60 board support   Sascha Hauer
  • [PATCH 2/4] ARM: i.MX: bbu-internal: optionally use DCD data from image   Sascha Hauer
  • [PATCH 3/4] ARM: dts: imx: share pad macro names between imx6q and imx6dl   Sascha Hauer
  • [PATCH 4/4] ARM: i.MX6: Add dfi fs700 m60 i.MX6 Q7 board support   Sascha Hauer
• [PATCH 1/4] ARM: i.MX: bbu-internal: factor out a prereq function   Sascha Hauer
• [PATCH] fb: make fb device a pure device   Sascha Hauer
• barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440   Pawel Suchanecki
  • [SPAM] barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440   Jean-Christophe PLAGNIOL-VILLARD
    • [SPAM] barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440   Pawel Suchanecki
• barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440 -- SOLVED   Pawel Suchanecki
  • barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440 -- SOLVED   Sascha Hauer
• [PATCH] mfd: syscon: Replace dev_info with dev_dbg   Alexander Shiyan
  • [PATCH] mfd: syscon: Replace dev_info with dev_dbg   Sascha Hauer
• [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Sascha Hauer
  • Re: [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Alexander Shiyan
    • [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Sascha Hauer
      • Re: [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Alexander Shiyan
      • Re: [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Alexander Shiyan
      • [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Sascha Hauer
      • Re: [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Alexander Shiyan
      • [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Sascha Hauer
    • [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Maxime Ripard
      • Re: [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Alexander Shiyan
      • [PATCH] Revert "ARM: Use armlinux_bootparams address for DTB"   Maxime Ripard
• barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Pawel Suchanecki
  • barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Pawel Suchanecki
  • Re: barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Alexander Shiyan
    • barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Cristiano Rodrigues
      • Re: barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Alexander Shiyan
  • barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Cristiano Rodrigues
    • barebox-2013.07/08.0 works from RAM but fails from NAND (Mini2440)   Cristiano Rodrigues
• mini2440 (256MB NAND)   Cristiano Rodrigues
• [PATCH] net: fix checksum verification   Baruch Siach
  • [PATCH] net: fix checksum verification   Sascha Hauer
    • [PATCH] net: fix checksum verification   Uwe Kleine-König
      • [PATCH] net: fix checksum verification   Sascha Hauer
    • [PATCH] net: fix checksum verification   Baruch Siach
• PCM038 USB is broken again   Alexander Shiyan
  • PCM038 USB is broken again   Sascha Hauer
    • Re: PCM038 USB is broken again   Alexander Shiyan
      • PCM038 USB is broken again   Sascha Hauer
      • PCM038 USB is broken again   Alexander Shiyan
      • PCM038 USB is broken again   Sascha Hauer
• [PATCH v2] net: fix checksum verification   Baruch Siach
  • [PATCH v2] net: fix checksum verification   Sascha Hauer
• [PATCH] Cleanup Kconfig files   Alexander Shiyan
  • [PATCH] Cleanup Kconfig files   Sascha Hauer
• [PATCH] fs: tftp: don't duplicate timeout information   Baruch Siach
  • [PATCH] fs: tftp: don't duplicate timeout information   Sascha Hauer
• [PATCH 1/2] uimage: fix: always support multi image support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] uimage: fix: always support multi image support   Sascha Hauer
• [PATCH 2/2] uimage: fix: fill size when no compression is used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] images: get rid of imximage-y   Sascha Hauer
• [PATCH] cubox multi image support   Sascha Hauer
  • [PATCH 1/6] ARM: mvebu: move Makefile entries back to arch/arm/Makefile   Sascha Hauer
  • [PATCH 2/6] ARM: dts: cubox: fix stdout-path property   Sascha Hauer
  • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sascha Hauer
    • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sebastian Hesselbarth
      • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sascha Hauer
      • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sebastian Hesselbarth
      • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sascha Hauer
    • [PATCH 3/6] ARM: mvebu: introduce multi image support   Sebastian Hesselbarth
  • [PATCH 4/6] ARM: mvebu: dove: use uart from devicetree   Sascha Hauer
  • [PATCH 5/6] ARM: mvebu: dove: use timer from devicetree   Sascha Hauer
  • [PATCH 6/6] ARM: mvebu: cubox: Update defconfig   Sascha Hauer
  • [PATCH] cubox multi image support   Thomas Petazzoni
    • [PATCH] cubox multi image support   Sascha Hauer
• [PATCH] of: Fix endless loop in of_add_memory   Sascha Hauer
• [PATCH] of_property and phandles   Sascha Hauer
  • [PATCH 1/7] of: fix merge mode in of_unflatten_dtb   Sascha Hauer
  • [PATCH 2/7] of: parse phandles during unflatten   Sascha Hauer
  • [PATCH 4/7] of: introduce some new helpers   Sascha Hauer
  • [PATCH 7/7] oftree command: Allow to specify node by alias   Sascha Hauer
  • [PATCH] of_property and phandles   Jan Lübbe
• [PATCH 3/7] of: default to internal tree in of_find_node_by_path_from   Sascha Hauer
• [PATCH 5/7] of_property command: allow to specify a node by alias   Sascha Hauer
• [PATCH 6/7] of_property command: allow to set phandles   Sascha Hauer
• [PATCH] of: base.c: Use correct device-tree in of_add_initrd()   David Jander
  • [PATCH] of: base.c: Use correct device-tree in of_add_initrd()   Sascha Hauer
• [PATCH] move BOARDINFO to globalvar   Sascha Hauer
  • [PATCH 4/8] remove remaining references of CONFIG_BOARDINFO   Sascha Hauer
  • [PATCH 7/8] Set model and hostname at boardlevel   Sascha Hauer
    • Re: [PATCH 7/8] Set model and hostname at boardlevel   Alexander Shiyan
      • [PATCH 7/8] Set model and hostname at boardlevel   Sascha Hauer
    • [PATCH 7/8] Set model and hostname at boardlevel   Sebastian Hesselbarth
      • [PATCH 7/8] Set model and hostname at boardlevel   Sascha Hauer
      • [PATCH 7/8] Set model and hostname at boardlevel   Sebastian Hesselbarth
• [PATCH 1/8] globalvar: Allow to set initial value   Sascha Hauer
• [PATCH 2/8] Add a global.version variable   Sascha Hauer
• [PATCH 3/8] globalvar: move globalvar init to pure_initcall   Sascha Hauer
• [PATCH 5/8] introduce barebox_set_model   Sascha Hauer
• [PATCH 6/8] Make hostname available to C Code   Sascha Hauer
• [PATCH 8/8] export model as globalvar   Sascha Hauer
• [PATCH] imx-image: Align image size   Sascha Hauer
• [PATCH] ARM: i.MX6 phyflex: Enable lowlevel UART   Sascha Hauer
• [PATCH 0/3] Marvell MVEBU OF clock providers   Sebastian Hesselbarth
  • [PATCH 2/3] clk: mvebu: add OF clock providers for Marvell MVEBU SoCs   Sebastian Hesselbarth
  • [PATCH 0/3] Marvell MVEBU OF clock providers   Sascha Hauer
• [PATCH 1/3] ARM: dove: add missing clocks property to timer node   Sebastian Hesselbarth
• [PATCH 3/3] ARM: dove: remove temporary clock and non-DT device probing   Sebastian Hesselbarth
• Porting BareBox to Variscite iMX6 SOM   Michael Burkey
  • Porting BareBox to Variscite iMX6 SOM   Sascha Hauer
    • Porting BareBox to Variscite iMX6 SOM   Alexander Aring
  • Porting BareBox to Variscite iMX6 SOM   Michael Burkey
    • Porting BareBox to Variscite iMX6 SOM   Sascha Hauer
  • Porting BareBox to Variscite iMX6 SOM   Michael Burkey
  • Porting BareBox to Variscite iMX6 SOM   Michael Burkey
    • Porting BareBox to Variscite iMX6 SOM   Sascha Hauer
      • Porting BareBox to Variscite iMX6 SOM   Michael Burkey
      • Porting BareBox to Variscite iMX6 SOM   Sascha Hauer
      • Porting BareBox to Variscite iMX6 SOM   Michael Burkey
      • Porting BareBox to Variscite iMX6 SOM   Sascha Hauer
• [PATCH] cleanup gpio includes   Sascha Hauer
  • [PATCH 2/8] ARM: include <gpio.h> instead of <mach/gpio.h>   Sascha Hauer
  • [PATCH 4/8] ARM: AT91: move iomux definitions to iomux.h   Sascha Hauer
  • [PATCH 5/8] ARM: MXS: move iomux definitions to iomux.h   Sascha Hauer
  • [PATCH 6/8] ARM: Samsung: move iomux definitions to iomux.h   Sascha Hauer
• [PATCH 1/8] ARM: AT91: Add missing include   Sascha Hauer
• [PATCH 3/8] ARM: i.MX23: Fix double include protection   Sascha Hauer
• [PATCH 7/8] ARM: i.MX: move iomux definitions to iomux.h   Sascha Hauer
• [PATCH 8/8] ARM: remove include of mach/gpio.h for gpiolib users   Sascha Hauer
• [PATCH 1/1] ubi: ubi_volume_cdev_read: use pr_debug for debug info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] ubi: ubi_volume_cdev_read: use pr_debug for debug info   Sascha Hauer
• [PATCH 1/2] ARM: i.MX: move esdctl device registration to soc_init   Sascha Hauer
• [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank   Sascha Hauer
  • [SPAM] [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank   Jean-Christophe PLAGNIOL-VILLARD
    • [SPAM] [PATCH 2/2] ARM: dts: imx53 qsb: remove wrong memory bank   Sascha Hauer
• [PATCH] AM33xx: Make OSC frequency board depended   Teresa Gámez
  • [PATCH] AM33xx: Make OSC frequency board depended   Jan Lübbe
  • [PATCH] AM33xx: Make OSC frequency board depended   Sascha Hauer
• uImage doesn't boot   Vanhauwaert Wouter
  • uImage doesn't boot   Sascha Hauer
• [PATCH 1/2] ARM: omap: barebox update spi nor MLO handler   Shravan Kumar
  • [PATCH 1/2] ARM: omap: barebox update spi nor MLO handler   Sascha Hauer
• [PATCH 2/2] PCM051: Added barebox update SPI NOR MLO handler   Shravan Kumar
• [PATCH] OMAP fixes and beaglebone black support   Sascha Hauer
  • [PATCH 2/8] ARM: omap: fix omap_save_bootinfo   Sascha Hauer
  • [PATCH 5/8] ARM: am33xx: implement cpu revision decoding   Sascha Hauer
  • [PATCH 6/8] ARM: am33xx: beaglebone: split out DDR2 init for BB White   Sascha Hauer
  • [PATCH 8/8] ARM: am33xx: beaglebone: add support for beaglebone black with DDR3 RAM   Sascha Hauer
• [PATCH 1/8] ARM: am33xx: Add SRAM0 address/size defines   Sascha Hauer
• [PATCH 3/8] ARM: am33xx: Make uart0 mux init callable during early init   Sascha Hauer
• [PATCH 4/8] ARM: cpuinfo: display the core name and version   Sascha Hauer
• [PATCH 7/8] ARM: am33xx: beaglebone: configure I2C EEPROM   Sascha Hauer
• [PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code   Teresa Gámez
  • [PATCH 2/3 for next] PCM051: Clean up lowlevel code   Teresa Gámez
  • [PATCH 3/3 for next] beaglebone: Clean up lowlevel code   Teresa Gámez
  • [PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code   Sascha Hauer
    • [PATCH 1/3 for next] AM33xx: Cleanup of lowlevel code   Teresa Gamez
• [PATCH v2 1/2] ARM: omap: barebox update spi nor MLO handler   Shravan Kumar
  • [PATCH v2 1/2] ARM: omap: barebox update spi nor MLO handler   Sascha Hauer
• [PATCH v2 2/2] PCM051: Added barebox update SPI NOR MLO handler   Shravan Kumar
• [PATCH] mci: sdhci: fix IRQSTAT_DMAE bit shift   Steffen Trumtrar
  • [PATCH] mci: sdhci: fix IRQSTAT_DMAE bit shift   Sascha Hauer
• [RFC 0/8] barebox on Canon cameras: serial console and dts support   Antony Pavlov
  • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Antony Pavlov
    • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Jason Cooper
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Antony Pavlov
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Jason Cooper
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Sebastian Hesselbarth
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Jason Cooper
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Antony Pavlov
      • [RFC 1/8] ARM: add very initial support for Canon DIGIC chips   Jürgen Beisert
  • [RFC 2/8] serial: add driver for Canon DIGIC UART   Antony Pavlov
    • [RFC 2/8] serial: add driver for Canon DIGIC UART   Jason Cooper
  • [RFC 3/8] gpio: add driver for Canon DIGIC   Antony Pavlov
  • [RFC 4/8] ARM: DIGIC: add Canon PowerShot A1100 IS support   Antony Pavlov
  • [RFC 5/8] ARM: DIGIC: add canon-a1100_defconfig   Antony Pavlov
  • [RFC 6/8] ARM: DIGIC: add csrc-dummy   Antony Pavlov
  • [RFC 7/8] ARM: DIGIC: add Canon EOS 600D support   Antony Pavlov
  • [RFC 8/8] ARM: DIGIC: add canon-600d_defconfig   Antony Pavlov
• [PATCH] ARM: OMAP: PCM051: Remove spi platform data   Teresa Gámez
  • [PATCH] ARM: OMAP: PCM051: Remove spi platform data   Sascha Hauer
• [PATCH] am33xx beaglebone and related   Sascha Hauer
  • [PATCH 06/22] ARM: omap: fix omap_save_bootinfo   Sascha Hauer
    • [PATCH 06/22] ARM: omap: fix omap_save_bootinfo   Teresa Gamez
  • [PATCH 10/22] ARM: beaglebone: Clean up lowlevel code   Sascha Hauer
  • [PATCH 12/22] ARM: cpuinfo: display the core name and version   Sascha Hauer
  • [PATCH 13/22] ARM: am33xx: implement cpu revision decoding   Sascha Hauer
  • [PATCH 16/22] ARM: am33xx: make DDR PLL frequency configurable   Sascha Hauer
  • [PATCH 17/22] rework debug_ll   Sascha Hauer
  • [PATCH 20/22] ARM: beaglebone: register sd/emmc with persistent name   Sascha Hauer
  • [PATCH 21/22] ARM: beaglebone: update mlo_small defconfig   Sascha Hauer
  • [PATCH 22/22] ARM: beaglebone: update defconfig   Sascha Hauer
• [PATCH 01/22] console: fix console without CONFIG_PARAMETER   Sascha Hauer
• [PATCH 02/22] mci: omap: advertise 8 bit support   Sascha Hauer
• [PATCH 03/22] mci: omap: implement device detect callback   Sascha Hauer
• [PATCH 04/22] mci: omap: Allow to set mmc devname via platformdata   Sascha Hauer
• [PATCH 05/22] ARM: omap: Allow to set mmc devname used for booting   Sascha Hauer
• [PATCH 07/22] ARM: omap: rename INIT_LL to omap_uart_lowlevel_init   Sascha Hauer
• [PATCH 08/22] ARM: am33xx: Cleanup of lowlevel code   Sascha Hauer
• [PATCH 09/22] ARM: pcm051: Clean up lowlevel code   Sascha Hauer
• [PATCH 11/22] ARM: am33xx: set bootsource instance correctly for MMC1   Sascha Hauer
• [PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM   Sascha Hauer
• [PATCH 15/22] ARM: am33xx: Add mmc1 registration helper   Sascha Hauer
• [PATCH 18/22] ARM: beaglebone: Initialize UART for lowlevel debugging   Sascha Hauer
• [PATCH 19/22] ARM: beaglebone: add support for beaglebone black with DDR3 RAM   Sascha Hauer
• [PATCH] i.MX53: add imx53_add_mmc3   Eric Bénard
  • [PATCH] i.MX53: add imx53_add_mmc3   Sascha Hauer
• bareboxenv on userspace - wrong crc on env   Vanhauwaert Wouter
  • bareboxenv on userspace - wrong crc on env   Yi Qingliang
    • bareboxenv on userspace - wrong crc on env   Vanhauwaert Wouter
      • bareboxenv on userspace - wrong crc on env   Yi Qingliang
  • bareboxenv on userspace - wrong crc on env   Sascha Hauer
• [PATCH for next] PCM051: Fixup DDRPLL   Teresa Gámez
  • [PATCH for next] PCM051: Fixup DDRPLL   Sascha Hauer
• [PATCH] net/phy: support of mmd register read and write   Jan Weitzel
  • [PATCH] net/phy: support of mmd register read and write   Sascha Hauer
• [PATCH] i2c-omap: fix am33xx fclk_rate   Jan Weitzel
  • [PATCHi v2] i2c-omap: fix am33xx and omap3 fclk_rate   Jan Weitzel
    • [PATCHi v2] i2c-omap: fix am33xx and omap3 fclk_rate   Sascha Hauer
• [PATCH 0/4] Update P2020RDB board support to allow NFS booting.   Renaud Barbier
  • [PATCH 1/4] of: base: import of_find_node_by_type   Renaud Barbier
  • [PATCH 2/4] ppc: add mpc85xx device tree fixup functions   Renaud Barbier
  • [PATCH 3/4] ppc: bootm: relocate fdt to valid boot memory   Renaud Barbier
  • [PATCH 4/4] ppc: P2020RDB configuration update   Renaud Barbier
• [PATCH 1/1] arm: mmu: catch NULL pointer dereferences   Jean-Christophe PLAGNIOL-VILLARD

Last message date: Sat Aug 31 11:54:22 EDT 2013
Archived on: Sat Aug 31 11:54:02 EDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...