bareboxenv on userspace - wrong crc on env

[Vanhauwaert Wouter]

> -----Original Message-----
> From: Yi Qingliang [mailto:niqingliang2003 at gmail.com]
> Sent: donderdag 29 augustus 2013 12:44
> To: barebox at lists.infradead.org
> Cc: Vanhauwaert Wouter
> Subject: Re: bareboxenv on userspace - wrong crc on env
> 
> On Thursday, August 29, 2013 11:24:41 AM Vanhauwaert Wouter wrote:
> > Hello all,
> >
> > I'm having issues accessing my barebox environment from within linux....
> >
> > My barebox and environment are located on a SPI NOR flash.
> > This boots ok, and barebox is able to save its environment to it.
> >
> > When I want to load it in userspace through:
> >
> > $ bareboxenv -l /mnt /dev/mtd1
> > Or
> > $ dd if=/dev/mtd1 /tmp/barebox
> > Or
> > $ dd if=/dev/mdtblock1 /tmp/barebox
> >
> > Result is:
> > Wrong crc on env
> >
> > However it's working fine in barebox itself
> >
> > What can be wron?
> 
> maybe the ecc mode for nand flash is different in barebox and in kernel, you
> should check the config for barebox and kernel.
> 

It's SPI NOR flash...