[SPAM] barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440

[Jean-Christophe PLAGNIOL-VILLARD]

On 22:02 Tue 06 Aug     , Pawel Suchanecki wrote:
> Hello dear list,
> 
> I have barebox 2013.07/08.0 up and running, however I can not make it
> display the splash on my Mini2440.
> 
> I have it built with:
> 
>  --- Video drivers
>  -*-   S3C244x framebuffer driver
>  [*]   S3C244x verbose framebuffer info
> 
> & "Library gui routines"
> 
>  [*] bmp
>  [*] png
>           PNG Lib (lodePNG)  --->
> 
> but when I run:
> 
> mini2440:/ splash -f /dev/fb0 /mnt/F.bmp
> mini2440:/ echo $?
> 1
> 
> Splash command reads the file from mounted USB storage (pendrive),
> which takes a while but exits with error.
> 
> Also bmp & png commands are not available.

because the image renderer detect it automaticaly so you do need to care which
format the splash command use
> 
> I found the "fb0.enable=1" turning on the LCD but there is some
> garbage, which changes when I try to load different files.
> 
> I try to load .bmp-s generated by GIMP in 24 bit mode (with and
> without saving the information on color space).
> 
> It does not load barebox.png from logo/png{8,24}/200x200/color
> directory of barebox-2013.08.0 distro either.
> 
> What am I doing wrong?
> 

are you sure your lcd is connecte correctly?

I try the png support work fine sandbox & atmel at91 boards

Best Regards,
J.
> Thank you,
> Pawel
> 
> p.s. please CC me as I am not on the list atm.
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox