[PATCH] net/phy: support of mmd register read and write
Sascha Hauer
s.hauer at pengutronix.de
Sat Aug 31 06:01:46 EDT 2013
On Fri, Aug 30, 2013 at 10:01:20AM +0200, Jan Weitzel wrote:
> Add function for indirect access of the mmd registers, based on linux.
> phy_read_mmd_indirect
> phy_write_mmd_indirect
>
> Also clean some private mmd functions
>
> Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>
Applied, thanks
Sascha
> ---
> arch/arm/boards/dmo-mx6-realq7/board.c | 14 ++------
> arch/arm/boards/tqma6x/board.c | 14 ++------
> drivers/net/phy/phy.c | 63 ++++++++++++++++++++++++++++++++
> include/linux/phy.h | 4 ++
> 4 files changed, 73 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/boards/dmo-mx6-realq7/board.c b/arch/arm/boards/dmo-mx6-realq7/board.c
> index 69d93f8..628f5cb 100644
> --- a/arch/arm/boards/dmo-mx6-realq7/board.c
> +++ b/arch/arm/boards/dmo-mx6-realq7/board.c
> @@ -58,23 +58,15 @@ static iomux_v3_cfg_t realq7_pads_gpio[] = {
> MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
> };
>
> -static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
> -{
> - phy_write(dev, 0x0d, device);
> - phy_write(dev, 0x0e, reg);
> - phy_write(dev, 0x0d, (1 << 14) | device);
> - phy_write(dev, 0x0e, val);
> -}
> -
> static int ksz9031rn_phy_fixup(struct phy_device *dev)
> {
> /*
> * min rx data delay, max rx/tx clock delay,
> * min rx/tx control delay
> */
> - mmd_write_reg(dev, 2, 4, 0);
> - mmd_write_reg(dev, 2, 5, 0);
> - mmd_write_reg(dev, 2, 8, 0x003ff);
> + phy_write_mmd_indirect(dev, 4, 2, 0);
> + phy_write_mmd_indirect(dev, 5, 2, 0);
> + phy_write_mmd_indirect(dev, 8, 2, 0x03ff);
>
> return 0;
> }
> diff --git a/arch/arm/boards/tqma6x/board.c b/arch/arm/boards/tqma6x/board.c
> index 9e81a1d..3e051a5 100644
> --- a/arch/arm/boards/tqma6x/board.c
> +++ b/arch/arm/boards/tqma6x/board.c
> @@ -58,23 +58,15 @@ static iomux_v3_cfg_t tqma6x_pads_gpio[] = {
> MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
> };
>
> -static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
> -{
> - phy_write(dev, 0x0d, device);
> - phy_write(dev, 0x0e, reg);
> - phy_write(dev, 0x0d, (1 << 14) | device);
> - phy_write(dev, 0x0e, val);
> -}
> -
> static int ksz9031rn_phy_fixup(struct phy_device *dev)
> {
> /*
> * min rx data delay, max rx/tx clock delay,
> * min rx/tx control delay
> */
> - mmd_write_reg(dev, 2, 4, 0);
> - mmd_write_reg(dev, 2, 5, 0);
> - mmd_write_reg(dev, 2, 8, 0x003ff);
> + phy_write_mmd_indirect(dev, 4, 2, 0);
> + phy_write_mmd_indirect(dev, 5, 2, 0);
> + phy_write_mmd_indirect(dev, 8, 2, 0x003ff);
>
> return 0;
> }
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 112ff13..db00e38 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -632,6 +632,69 @@ int genphy_read_status(struct phy_device *phydev)
> return 0;
> }
>
> +static inline void mmd_phy_indirect(struct phy_device *phydev, int prtad,
> + int devad)
> +{
> + /* Write the desired MMD Devad */
> + phy_write(phydev, MII_MMD_CTRL, devad);
> +
> + /* Write the desired MMD register address */
> + phy_write(phydev, MII_MMD_DATA, prtad);
> +
> + /* Select the Function : DATA with no post increment */
> + phy_write(phydev, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
> +}
> +
> +/**
> + * phy_read_mmd_indirect - reads data from the MMD registers
> + * @phy_device: phy device
> + * @prtad: MMD Address
> + * @devad: MMD DEVAD
> + *
> + * Description: it reads data from the MMD registers (clause 22 to access to
> + * clause 45) of the specified phy address.
> + * To read these register we have:
> + * 1) Write reg 13 // DEVAD
> + * 2) Write reg 14 // MMD Address
> + * 3) Write reg 13 // MMD Data Command for MMD DEVAD
> + * 3) Read reg 14 // Read MMD data
> + */
> +int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
> +{
> + u32 ret;
> +
> + mmd_phy_indirect(phydev, prtad, devad);
> +
> + /* Read the content of the MMD's selected register */
> + ret = phy_read(phydev, MII_MMD_DATA);
> +
> + return ret;
> +}
> +
> +/**
> + * phy_write_mmd_indirect - writes data to the MMD registers
> + * @phy_device: phy device
> + * @prtad: MMD Address
> + * @devad: MMD DEVAD
> + * @data: data to write in the MMD register
> + *
> + * Description: Write data from the MMD registers of the specified
> + * phy address.
> + * To write these register we have:
> + * 1) Write reg 13 // DEVAD
> + * 2) Write reg 14 // MMD Address
> + * 3) Write reg 13 // MMD Data Command for MMD DEVAD
> + * 3) Write reg 14 // Write MMD data
> + */
> +void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, int devad,
> + u16 data)
> +{
> + mmd_phy_indirect(phydev, prtad, devad);
> +
> + /* Write the data into MMD's selected register */
> + phy_write(phydev, MII_MMD_DATA, data);
> +}
> +
> static int genphy_config_init(struct phy_device *phydev)
> {
> int val;
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 8e60758..94f631b 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -288,5 +288,9 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
> int (*run)(struct phy_device *));
> int phy_scan_fixups(struct phy_device *phydev);
>
> +int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad);
> +void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, int devad,
> + u16 data);
> +
> extern struct bus_type mdio_bus_type;
> #endif /* __PHYDEV_H__ */
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list