[PATCH 14/22] ARM: am33xx: beaglebone: configure I2C EEPROM

[Sascha Hauer]

From: Jan Luebbe <jlu at pengutronix.de>

Signed-off-by: Jan Luebbe <jlu at pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/beaglebone/board.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
index 52b3ec8..e12c70b 100644
--- a/arch/arm/boards/beaglebone/board.c
+++ b/arch/arm/boards/beaglebone/board.c
@@ -100,11 +100,20 @@ static void beaglebone_eth_init(void)
 	am33xx_add_cpsw(&cpsw_data);
 }
 
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50)
+	},
+};
+
 static int beaglebone_devices_init(void)
 {
 	am33xx_add_mmc0(NULL);
 
 	am33xx_enable_i2c0_pin_mux();
+	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+	am33xx_add_i2c0(NULL);
+
 	beaglebone_eth_init();
 
 	armlinux_set_bootparams((void *)0x80000100);
-- 
1.8.4.rc3