March 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Mar 1 00:21:09 PST 2017
Ending: Fri Mar 31 12:40:52 PDT 2017
Messages: 197

• 4.9 Kernel panic on ACS and intermittent ability to host AP   Chris Price
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Chris Price
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Hsu, Ryan
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Chris Price
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Hsu, Ryan
• 4.9 Kernel panic on ACS and intermittent ability to host AP   Chris Price
• [4.11] ath10k: fix incorrect wlan_mac_base in qca6174_regs   Kalle Valo
• [PATCH 0/3] Channels in licensed bands, noise floor override   Simon Wunderlich
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Sven Eckelmann
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Rob Herring
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Sven Eckelmann
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Adrian Chadd
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Sven Eckelmann
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Rob Herring
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Sven Eckelmann
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Rob Herring
• [PATCH 1/2] dt: bindings: add new dt entry for ath10k calibration variant   Sven Eckelmann
• [PATCH 1/3] ath9k: Support channels in licensed bands   Simon Wunderlich
• [PATCH 1/3] ath9k: Support channels in licensed bands   Zefir Kurtisi
• [PATCH 1/3] ath9k: Support channels in licensed bands   Simon Wunderlich
• [PATCH 2/2] ath10k: search DT for qcom,ath10k-calibration-variant   Sven Eckelmann
• [PATCH 2/2] ath10k: search DT for qcom, ath10k-calibration-variant   Christian Lamparter
• [PATCH 2/2] ath10k: search DT for qcom, ath10k-calibration-variant   Sven Eckelmann
• [PATCH 2/3] ath10k: add support for channels in licensed bands   Simon Wunderlich
• [PATCH 2/3] ath10k: add support for channels in licensed bands   Sebastian Gottschall
• [PATCH 2/3] ath10k: add support for channels in licensed bands   Simon Wunderlich
• [PATCH 3/3] ath9k: add noise floor override option   Simon Wunderlich
• [PATCH 3/3] ath9k: add noise floor override option   Janusz Dziedzic
• [PATCH 3/3] ath9k: add noise floor override option   Simon Wunderlich
• [PATCH 3/3] ath9k: add noise floor override option   Janusz Dziedzic
• [PATCH 4.11] ath10k: fix incorrect wlan_mac_base in qca6174_regs   ryanhsu at qca.qualcomm.com
• [PATCH 4.11] ath10k: fix incorrect wlan_mac_base in qca6174_regs   Kalle Valo
• [PATCH] ath10k: cancel coverage class work during stop and restart   Mohammed Shafi Shajakhan
• [PATCH] ath10k: Enable a HTC debug message during insufficient tx credits   Mohammed Shafi Shajakhan
• [PATCH] ath10k: Fix fetching channel during potential radar detection   Mohammed Shafi Shajakhan
• [PATCH] ath10k: Fix NAPI enable/disable symmetry for AHB interface   Mohammed Shafi Shajakhan
• [PATCH] ath10k: fix station nss computation   c_vnaral at qti.qualcomm.com
• [PATCH] ath10k: Fix the Transmit Power Control stats display format   c_mkenna at qti.qualcomm.com
• [PATCH] ath10k: Fix typo in wmi header file   Mohammed Shafi Shajakhan
• [PATCH] ath10k: fix warnings from an earlier commit   Kalle Valo
• [PATCH] ath10k: QCA6174 hw3.0: update board-2.bin   Kalle Valo
• [PATCH] ath10k: QCA6174 hw3.0: update board-2.bin   Kyle McMartin
• [PATCH] ath10k: Remove obselete Copy Engine comments   Mohammed Shafi Shajakhan
• [PATCH] ath10k: remove redundant check of len with buf_len   Colin King
• [PATCH v2 0/3] Channels in licensed bands, noise floor override   Simon Wunderlich
• [PATCHv2 1/3] ath9k: Support channels in licensed bands   Simon Wunderlich
• [PATCH v2 1/3] ath9k: Support channels in licensed bands   Simon Wunderlich
• [PATCHv2 1/4] cfg80211: Add support to enable or disable btcoex   Johannes Berg
• [PATCHv2 1/4] cfg80211: Add support to enable or disable btcoex   Raja, Tamizh Chelvam
• [PATCH v2 2/3] ath10k: add support for channels in licensed bands   Simon Wunderlich
• [PATCH v2 3/3] ath9k: add noise floor override option   Simon Wunderlich
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Johannes Berg
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Johannes Berg
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Raja, Tamizh Chelvam
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Johannes Berg
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Raja, Tamizh Chelvam
• [PATCHv2 3/4] cfg80211: Add Support set btcoex priority value   Johannes Berg
• [PATCHv2] ath10k: Update available channel list for 5G radio   Kalle Valo
• [PATCH v5 00/10] ath10k: sdio support   Kalle Valo
• [PATCH v5 00/10] ath10k: sdio support   Kalle Valo
• [PATCH v5 01/10] ath10k: htc: made static function public   Kalle Valo
• [PATCH v5 02/10] ath10k: htc: rx trailer lookahead support   Kalle Valo
• [PATCH v5 03/10] ath10k: htc: move htc ctrl ep connect to htc_init   Kalle Valo
• [PATCH v6 00/10] ath10k: sdio support   Kalle Valo
• [PATCH v6 00/10] ath10k: sdio support   Kalle Valo
• [PATCH v6 00/10] ath10k: sdio support   Erik Stromdahl
• [PATCH v6 00/10] ath10k: sdio support   Kalle Valo
• [PATCH v6 01/10] ath10k: htc: made static function public   Kalle Valo
• [PATCH v6 02/10] ath10k: htc: rx trailer lookahead support   Kalle Valo
• [PATCH v6 03/10] ath10k: htc: move htc ctrl ep connect to htc_init   Kalle Valo
• [PATCH v6 03/10] ath10k: htc: move htc ctrl ep connect to htc_init   Ryan Hsu
• [PATCH v6 03/10] ath10k: htc: move htc ctrl ep connect to htc_init   Erik Stromdahl
• [PATCH v6 04/10] ath10k: htc: refactorization   Kalle Valo
• [PATCH v6 05/10] ath10k: various sdio related definitions   Kalle Valo
• [PATCH v6 06/10] ath10k: add sdio extra initializations   Kalle Valo
• [PATCH v6 06/10] ath10k: add sdio extra initializations   Ryan Hsu
• [PATCH v6 06/10] ath10k: add sdio extra initializations   Kalle Valo
• [PATCH v6 07/10] ath10k: sdio get target info   Kalle Valo
• [PATCH v6 08/10] ath10k: htc: ready_ext msg support   Kalle Valo
• [PATCH v6 09/10] ath10k: different fw file names for usb and sdio   Kalle Valo
• [PATCH v6 09/10] ath10k: different fw file names for usb and sdio   Ryan Hsu
• [PATCH v6 09/10] ath10k: different fw file names for usb and sdio   Kalle Valo
• [PATCH v6 10/10] ath10k: sdio support   Kalle Valo
• [PATCH v6 10/10] ath10k: sdio support   Kalle Valo
• [RFC] ath10k: search DT for qcom,ath10k-calibration-variant   Sven Eckelmann
• [RFC] ath10k: search DT for qcom,ath10k-calibration-variant   Sven Eckelmann
• [RFC v2] ath10k: search DT for qcom,ath10k-calibration-variant   Sven Eckelmann
• [RFC v4 06/21] ath10k: sdio support   Valo, Kalle
• [RFC v4 06/21] ath10k: sdio support   Valo, Kalle
• [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
• [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
• [RFC v4 06/21] ath10k: sdio support   Kalle Valo
• [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
• [RFC v4 06/21] ath10k: sdio support   Kalle Valo
• [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
• [RFC v4 06/21] ath10k: sdio support   Kalle Valo
• [RFC v4 06/21] ath10k: sdio support   Erik Stromdahl
• [RFC v4 06/21] ath10k: sdio support   Kalle Valo
• [v2,1/2] ath10k: improve the firmware download time for QCA6174   Kalle Valo
• [v2] ath10k: Fix a warning during channel switch with multiple vaps   Kalle Valo
• ar9003 family unknown registers description   孙建希
• ar9003 family unknown registers description   Adrian Chadd
• ath10k - spectral scan - and - channel change   Will Kerr
• ath10k - spectral scan - and - channel change   Shajakhan, Mohammed Shafi (Mohammed Shafi)
• ath10k - spectral scan - and - channel change   Will Kerr
• ath10k - spectral scan - and - channel change   Mohammed Shafi Shajakhan
• ath10k - spectral scan - and - channel change   Will Kerr
• ath10k - spectral scan - and - channel change   Mohammed Shafi Shajakhan
• ath10k - spectral scan - and - channel change   Will Kerr
• ath10k: Disallow DFS simulation if DFS channel is not enabled   Kalle Valo
• ath10k: Fix fetching channel during potential radar detection   Kalle Valo
• ath10k: Fix typo in wmi header file   Kalle Valo
• ath10k: fix warnings from an earlier commit   Kalle Valo
• ath10k: remove redundant check of len with buf_len   Kalle Valo
• ath10k: remove redundant error check   Kalle Valo
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Ben Greear
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Sebastian Gottschall
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Ben Greear
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Sebastian Gottschall
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Adrian Chadd
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Ben Greear
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Sebastian Gottschall
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Sebastian Gottschall
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Adrian Chadd
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Sebastian Gottschall
• ath10k bug in station mode with regard to TX-BEAMFORMER?   Adrian Chadd
• ath10k QCA988x firmware not supporting monitor mode   KAVITA MATHUR
• Driver support for QCA6174 chip using SDIO interface   Akesh M Chacko
• Driver support for QCA6174 chip using SDIO interface   Valo, Kalle
• firmware version 10.2.4.70.54 crash when running on centos-7.3(kernel version -> 3.10.0-514.el7.x86_64)   Chirag Shahani
• firmware version 10.2.4.70.54 crash when running on centos-7.3(kernel version -> 3.10.0-514.el7.x86_64)   Kalle Valo
• firmware version 10.2.4.70.54 crash when running on centos-7.3(kernel version -> 3.10.0-514.el7.x86_64)   Chirag Shahani
• Fw: ath10k - spectral scan - and - channel change   Will Kerr
• Fwd: Suspend resume broken since 4.9   Enrico Tagliavini
• How to integrate the latest ath10k driver into an older kernel release ?   Jean-Luc Kalmus
• How to integrate the latest ath10k driver into an older kernel release ?   Chris Price
• How to integrate the latest ath10k driver into an older kernel release ?   Janusz Dziedzic
• How to integrate the latest ath10k driver into an older kernel release ?   Wu Chung-I
• How to integrate the latest ath10k driver into an older kernel release ?   K.Mani
• How to integrate the latest ath10k driver into an older kernel release ?   Janusz Dziedzic
• How to integrate the latest ath10k driver into an older kernel release ?   吳重毅
• is it possible to set tx power below 0 dbm   Xue Liu
• is it possible to set tx power below 0 dbm   Adrian Chadd
• is it possible to set tx power below 0 dbm   Xue Liu
• Maximum Transmit Power for channel 36 ,40,44 and 48   KAVITA MATHUR
• Maximum Transmit Power for channel 36 ,40,44 and 48   Sebastian Gottschall
• Maximum Transmit Power for channel 36 ,40,44 and 48   KAVITA MATHUR
• Maximum Transmit Power for channel 36 ,40,44 and 48   Adrian Chadd
• Not able to set 0dBm Transmit Power using Backport 4.4.2-1 ath9k driver   KAVITA MATHUR
• Please update board-2.bin for QCA9888   Ben Greear
• Please update board-2.bin for QCA9888   Valo, Kalle
• Please update board-2.bin for QCA9888   Valo, Kalle
• Please update board-2.bin for QCA9888   Ben Greear
• Please update board-2.bin for QCA9888   Adrian Chadd
• QCA4019: calibration files and board files   Christian Lamparter
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Adrian Chadd
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Valo, Kalle
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Sven Eckelmann
• QCA4019: calibration files and board files   Christian Lamparter
• QCA4019: calibration files and board files   Waldemar Rymarkiewicz
• QCA4019: calibration files and board files   Adrian Chadd
• QCA4019 firmware: wrong numChain setting for bmi-board 16+17   Sven Eckelmann
• QCA6174 ACS failure on first attempt   Chris Price
• QCA6174 ACS failure on first attempt   Ryan Hsu
• QCA6174 ACS failure on first attempt   Chris Price
• QCA6174 ACS failure on first attempt   Adrian Chadd
• QCA9880 slow performance adhoc/IBSS mode   Ralph Houthoofdt
• QCA9880 slow performance adhoc/IBSS mode   Ben Greear
• QCA9984 bmi identification failure   Christian Lamparter
• QCA9984 bmi identification failure   Sebastian Gottschall
• QCA9984 bmi identification failure   Christian Lamparter
• QCA9984 bmi identification failure   Sebastian Gottschall
• QCA9984 bmi identification failure   Christian Lamparter
• QCA9984 bmi identification failure   Sebastian Gottschall
• QCA9984 bmi identification failure   Christian Lamparter
• QCA9984 with kernel panic   吳重毅
• QCA9984 with kernel panic   Ben Greear
• QCA9984 with kernel panic   吳重毅
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Ryan Hsu
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Ryan Hsu
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Guilherme Íscaro
• Reporting a bug for QCA6174 802.11ac   Kalle Valo
• Reporting a bug for QCA6174 802.11ac   Adrian Chadd
• Should ath10k enable RX_FLAG_ALLOW_SAME_PN   Ben Greear
• Should ath10k enable RX_FLAG_ALLOW_SAME_PN   Adrian Chadd
• Suspend resume broken since 4.9   Enrico Tagliavini
• Suspend resume broken since 4.9   Hsu, Ryan
• Suspend resume broken since 4.9   Enrico Tagliavini
• Suspend resume broken since 4.9   Hsu, Ryan

Last message date: Fri Mar 31 12:40:52 PDT 2017
Archived on: Fri Mar 31 12:41:17 PDT 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...