is it possible to set tx power below 0 dbm

Adrian Chadd adrian at freebsd.org
Mon Mar 6 09:13:55 PST 2017


hiya,

I don't think it's something that you can do with any accuracy out of
the box? You'd need some design help from QCA to figure out which NICs
would let you set such low TX power levels accurately.



-adrian

On 6 March 2017 at 04:13, Xue Liu <xue.liu at dks-koeln.de> wrote:
> Hello everyone,
>
> I am working on a project which uses two WLE800VX WLAN cards and two special
> directional attenna groups. These directional attenna group stay very close
> (1~3cm) with each other.
>
> The problem is that now 0 dBm transmission power is still too high for us.
> The SNR is very high ( about 90 dB), but the physical bandwith is low (526.5
> Mbps). So I would like to know is it possible to set the tx power to a even
> lower level (-10 dBm or more) ?
>
> Thanks a lot.
>
> Regards,
>
> Xue Liu
>
> --
> M.Sci.
>
> Embedded Software Entwicklung
>
> DKS Dienstleistungsgesellschaft
> für Kommunikationsanlagen des
> Stadt- und Regionalverkehrs mbH
>
> Robert-Perthel-Str. 79
> D-50739 Köln
>
> Fon: +49 221 954442-43
> Fax: +49 221 954442-23
> E-Mail: xue.liu at dks-koeln.de
> Web: www.dks-koeln.de
>
> Geschäftsführung: Christian Döring, Ralf Kochs
>
> Aufsichtsratsvorsitzender: Jörn Schwarze
>
> Sitz der Gesellschaft: Köln
>
> Registergericht: Köln, HRB 4521
>
> UST-IDNr: DE154089761
>
> Wichtiger Hinweis: Diese E-Mail und etwaige Anlagen können Betriebs- oder
> Geschäftsgeheimnisse, dem Anwaltsgeheimnis unterliegende oder sonstige
> vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich
> erhalten haben, ist Ihnen der Status dieser E-Mail bekannt. Bitte
> benachrichtigen Sie uns in diesem Fall sofort durch Antwort-Mail und löschen
> Sie diese E-Mail nebst etwaigen Anlagen von Ihrem System. Ebenso dürfen Sie
> diese E-Mail oder ihre Anlagen nicht kopieren oder an Dritte weitergeben.
> Vielen Dank!
>
> Important note: This e-mail and any attachment are confidential and may
> contain trade secrets and may well also be legally privileged or otherwise
> protected from disclosure. If you have received it in error, you are on
> notice of its status. Please notify us immediately by reply e-mail and then
> delete this e-mail and any attachment from your system. If you are not the
> intended recipient please understand that you must not copy this e-mail or
> any attachment or disclose the contents to any other person. Thank you for
> your cooperation.
>
>
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k



More information about the ath10k mailing list