ath10k QCA988x firmware not supporting monitor mode
KAVITA MATHUR
kavitam at cdot.in
Wed Mar 1 02:25:19 PST 2017
Hi,
Thanks a lot..
Now I am able to set monitor mode after applying the patch and latest firmware.
Thanks & Regards,
Kavita
On Wed, 1 Mar 2017 10:52:42 +0530, Mohammed Shafi Shajakhan wrote
> On Wed, Mar 01, 2017 at 10:38:48AM +0530, KAVITA MATHUR wrote:
> >
> >
> > Hi!
> >
> > We are using Atheros QCA9880 mPCIe module with ath10k drivers and firmware.
> >
> > Kernel: 3.12
> > Backports: 4.4
> > Firmware:10.2.4.70.59-2
>
> [shafi] worth trying updated firmware
>
https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA988X/hw2.0/
>
> >
> > We are not able to run the wlan1 interface in monitor mode. The following error comes
> > when we do
> > iw phy phy1 interface add wlan1 type monitor
> > ifconfig wlan1 up
>
> [shafi] can you please confirm the below fix is already available
> (its cced to stable though)
> https://patchwork.kernel.org/patch/8481281/
>
> and if you see still see the issue in latest backports
> http://buildbot.w1.fi/backports-wireless-testing/
>
> please revert back
>
> >
> > ath10k_pci 0001:03:00.0: firmware crashed! (uuid n/a)
> > ath10k_pci 0001:03:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff sub 0000:0000) fw
> > 10.2.4.70.59-2 fwapi 5 bdapi 1 htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0
> > hwcrypto 1 features no-p2p,raw-mode
> > ath10k_pci 0001:03:00.0: debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> > ath10k_pci 0001:03:00.0: firmware register dump:
> > ath10k_pci 0001:03:00.0: [00]: 0x4100016C 0x00000000 0x0097F8D5 0x00000000
> > ath10k_pci 0001:03:00.0: [04]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [08]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [12]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [16]: 0x00000000 0x00000000 0x00000000 0x0097F8D5
> > ath10k_pci 0001:03:00.0: [20]: 0x00000000 0x00401930 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [24]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [28]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [32]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [36]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [40]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [44]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [48]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [52]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: [56]: 0x00000000 0x00000000 0x00000000 0x00000000
> > ath10k_pci 0001:03:00.0: failed to set 2g txpower 0: -108
> > ath10k_pci 0001:03:00.0: failed to setup tx power 0: -108
> > ath10k_pci 0001:03:00.0: failed to recalc tx power: -108
> > ------------[ cut here ]------------
> > WARNING: at fb83c3b8 [verbose debug info unavailable]
> > Modules linked in: ath10k_pci(O) ath10k_core(O) mac80211(O) ath(O) cfg80211(O) compat(O)
> > uio_pdrv_genirq
> > CPU: 0 PID: 17173 Comm: ifconfig Tainted: G O 3.12.37-rt51+ #23
> > task: e6415500 ti: ef02a000 task.ti: ef02a000
> > NIP: fb83c3b8 LR: fb83c3a8 CTR: c00788f0
> > REGS: ef02bcb0 TRAP: 0700 Tainted: G O (3.12.37-rt51+)
> > MSR: 00029002 <CE,EE,ME> CR: 84008482 XER: 20000000
> >
> > GPR00: fb83c3a8 ef02bd60 e6415500 ffffff94 eb865a40 00000152 00000000 00000000
> > GPR08: 00000000 00000001 00000000 00021002 84ad2e42 10025578 10100000 00000000
> > GPR16: 00000000 1000acb4 1001d264 1001d264 1001d1f8 ef98200c 00000000 e0e44000
> > GPR24: e0e44480 ffffffff 00000001 00000000 e0e44704 e0e40000 ffffff94 ef7ccba0
> > NIP [fb83c3b8] ieee80211_add_virtual_monitor+0xd8/0x1c0 [mac80211]
> > LR [fb83c3a8] ieee80211_add_virtual_monitor+0xc8/0x1c0 [mac80211]
> > Call Trace:
> > [ef02bd60] [fb83c3a8] ieee80211_add_virtual_monitor+0xc8/0x1c0 [mac80211] (unreliable)
> > [ef02bd80] [fb83d168] ieee80211_do_open+0x4e8/0xa30 [mac80211]
> > [ef02bdc0] [c04d73a8] __dev_open+0xe8/0x160
> > [ef02bdf0] [c04d76a0] __dev_change_flags+0xa0/0x180
> > [ef02be10] [c04d785c] dev_change_flags+0x1c/0x70
> > [ef02be30] [c057d930] devinet_ioctl+0x600/0x8e0
> > [ef02be90] [c04ba6f4] sock_ioctl+0x224/0x2e0
> > [ef02beb0] [c0115150] do_vfs_ioctl+0x410/0x7a0
> > [ef02bf10] [c0115520] SyS_ioctl+0x40/0x80
> > [ef02bf40] [c000fb04] ret_from_syscall+0x0/0x3c
> > --- Exception: c01 at 0xff4ff8c
> > LR = 0xffed2c0
> > Instruction dump:
> > 39200008 913d038c 7fa3eb78 93dd000c 4bffe349 7fe3fb78 7fa4eb78 4bfee2cd
> > 7c690034 5529d97e 7c7e1b78 69290001 <0f090000> 2f890000 7fa3eb78 40de00a0
> > ---[ end trace c9df4859ac192be7 ]---
> > ieee80211 phy1: Hardware restart was requested
> > SIOCSIFFLAGS: Cannot send after transport endpoint shutdown
> >
> > Please help me to set monitor mode on WiFi node.
> >
> > Disclaimer:
> >
> > ----------
> >
> > This email and any files transmitted with it are confidential and intended solely for
> >
> > the use of the individual or entity to whom they are addressed. If you are not the
> >
> > intended recipient you are notified that disclosing, copying, distributing or taking
> >
> > any action in reliance on the contents of this information is strictly prohibited. The
> >
> > sender does not accept liability for any errors or omissions in the contents of this
> >
> > message, which arise as a result
> > ------- End of Forwarded Message -------
> >
> >
> > Thanks & Regards,
> > कविता माथुर Kavita Mathur
> > वरिष्ठ अनुसंधान अभियंता Senior Research Engineer
> > सी-डॉट C-DOT
> > इलैक्ट्रॉनिक्स सिटी फेज़ I Electronics City Phase I
> > होसूर रोड, बेंगलूरु Hosur Road, Bengaluru – 560100
> > फोन Ph 080-28529896
> > Disclaimer:
> > ----------
> > This email and any files transmitted with it
> >
> >
> > _______________________________________________
> > ath10k mailing list
> > ath10k at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/ath10k
Thanks & Regards,
कविता माथुर Kavita Mathur
वरिष्ठ अनुसंधान अभियंता Senior Research Engineer
सी-डॉट C-DOT
इलैक्ट्रॉनिक्स सिटी फेज़ I Electronics City Phase I
होसूर रोड, बेंगलूरु Hosur Road, Bengaluru – 560100
फोन Ph 080-28529896
Disclaimer:
----------
This email and any files transmitted with it
More information about the ath10k
mailing list