Please update board-2.bin for QCA9888

[Valo, Kalle]

Ben Greear <greearb at candelatech.com> writes:

> On 03/08/2017 11:21 PM, Valo, Kalle wrote:
>> Ben Greear <greearb at candelatech.com> writes:
>>
>>> Newer 9886 (which use the 9888 firmware it seems) NICs will not
>>> boot unless you use the board-2.bin from the codeaura repo.
>>>
>>> Kalle:  Could you update your repo to the latest from codeaura so that it is
>>> easy to pull the latest board file into LEDE?
>>>
>>> If you have reason not to, please let me know.
>>
>> I'm not involved with codeaurora repositories so I don't know what file
>> you are talking about. What's the URL?
>>
>
> git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware
>
> [greearb at ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin
> -rw-rw-r--. 1 greearb greearb 60660 Mar  2 16:20 ath10k/QCA9888/hw2.0/board-2.bin
>
> [greearb at ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin
> 4fffcdf246cea4a4fd5ba67730262563  ath10k/QCA9888/hw2.0/board-2.bin
>
> I actually tested an older version of that file, but I assume the more
> recent one works
> fine too.  I don't have a 9886/8 system available for testing at the moment.

Ok, thanks. I'll ask internally why nobody has submitted that to me.

-- 
Kalle Valo