August 2022 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Aug 2 01:34:49 PDT 2022
Ending: Wed Aug 31 21:02:40 PDT 2022
Messages: 408

• [PATCH v2 3/3] dt-bindings: phy: qcom,usb-hs-phy: add definition for MSM8960   Krzysztof Kozlowski
• [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Markus Reichl
  • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Peter Geis
    • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Michael Riesch
      • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Peter Geis
      • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Michael Riesch
      • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Peter Geis
      • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Michael Riesch
      • [BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state   Markus Reichl
• [PATCH linux-next] phy: mapphone-mdm6600:using the pm_runtime_resume_and_get to simplify the code   cgel.zte at gmail.com
• [PATCH 0/2] phy: qcom: drop regulator loads   Johan Hovold
  • [PATCH 1/2] phy: qcom-qmp-combo: drop regulator loads   Johan Hovold
  • [PATCH 2/2] phy: qcom-edp: drop regulator loads   Johan Hovold
  • [PATCH 0/2] phy: qcom: drop regulator loads   Doug Anderson
• [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA   William Zhang
  • [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA   William Zhang
    • [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA   Florian Fainelli
• [PATCH v4 0/8] phy: Add support for Lynx 10G SerDes   Sean Anderson
  • [PATCH v4 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R   Sean Anderson
  • [PATCH v4 2/8] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
    • [PATCH v4 2/8] dt-bindings: phy: Add Lynx 10G phy binding   Rob Herring
      • [PATCH v4 2/8] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
  • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
    • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Krzysztof Kozlowski
      • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
      • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Krzysztof Kozlowski
      • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
      • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Krzysztof Kozlowski
      • [PATCH v4 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
  • [PATCH v4 4/8] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
  • [PATCH v4 5/8] arm64: dts: ls1046a: Add serdes bindings   Sean Anderson
  • [PATCH v4 6/8] arm64: dts: ls1088a: Add serdes bindings   Sean Anderson
  • [PATCH v4 7/8] arm64: dts: ls1046ardb: Add serdes bindings   Sean Anderson
  • [PATCH v4 8/8] [WIP] arm64: dts: ls1088ardb: Add serdes bindings   Sean Anderson
  • [PATCH v4 0/8] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH] phy: qcom: edp: Postpone clk_set_rate until the PLL is up   Bjorn Andersson
• ARMADA espressobin SATA drive detection failure   Pali Rohár
  • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
    • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Marek Behún
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Marek Behún
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
      • ARMADA espressobin SATA drive detection failure   Shinichiro Kawasaki
      • ARMADA espressobin SATA drive detection failure   Pali Rohár
• [PATCH] phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845   Bjorn Andersson
  • [PATCH] phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845   Vinod Koul
• [PATCH 0/5] phy: qcom: edp: Introduce SC8280XP support   Bjorn Andersson
  • [PATCH 1/5] dt-bindings: phy: qcom-edp: Add SC8280XP PHY compatibles   Bjorn Andersson
    • [PATCH 1/5] dt-bindings: phy: qcom-edp: Add SC8280XP PHY compatibles   Krzysztof Kozlowski
  • [PATCH 2/5] phy: qcom: edp: Generate unique clock names   Bjorn Andersson
  • [PATCH 3/5] phy: qcom: edp: Perform lane configuration   Bjorn Andersson
  • [PATCH 4/5] phy: qcom: edp: Introduce support for DisplayPort   Bjorn Andersson
  • [PATCH 5/5] phy: qcom: edp: Add SC8280XP eDP and DP PHYs   Bjorn Andersson
  • [PATCH 0/5] phy: qcom: edp: Introduce SC8280XP support   Vinod Koul
• [PATCH v2 0/4] phy: qcom-qmp: Add SC8280XP USB PHYs   Bjorn Andersson
  • [PATCH v2 1/4] dt-bindings: phy: qcom,qmp: Add compatible for SC8280XP USB phys   Bjorn Andersson
    • [PATCH v2 1/4] dt-bindings: phy: qcom,qmp: Add compatible for SC8280XP USB phys   Krzysztof Kozlowski
  • [PATCH v2 2/4] phy: qcom-qmp-combo: Parameterize swing and pre_emphasis tables   Bjorn Andersson
  • [PATCH v2 3/4] phy: qcom-qmp: Add SC8280XP USB3 UNI phy   Bjorn Andersson
  • [PATCH v2 4/4] phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys   Bjorn Andersson
  • [PATCH v2 0/4] phy: qcom-qmp: Add SC8280XP USB PHYs   Vinod Koul
• [PATCH] dt-bindings: phy: Drop Pratyush Yadav   Krzysztof Kozlowski
  • [PATCH] dt-bindings: phy: Drop Pratyush Yadav   Rob Herring
  • [PATCH] dt-bindings: phy: Drop Pratyush Yadav   Michael Walle
    • [PATCH] dt-bindings: phy: Drop Pratyush Yadav   Krzysztof Kozlowski
• [PATCH 0/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY   Samuel Holland
  • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Samuel Holland
    • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Krzysztof Kozlowski
      • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Samuel Holland
      • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Krzysztof Kozlowski
    • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Paul Kocialkowski
      • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Samuel Holland
    • [PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property   Rob Herring
  • [PATCH 2/8] ARM: dts: sun8i: a33: Add DPHY interrupt   Samuel Holland
  • [PATCH 3/8] arm64: dts: allwinner: a64: Add DPHY interrupt   Samuel Holland
  • [PATCH 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant   Samuel Holland
    • [PATCH 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant   Krzysztof Kozlowski
    • [PATCH 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant   Paul Kocialkowski
      • [PATCH 4/8] dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant   Samuel Holland
  • [PATCH 5/8] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional   Samuel Holland
  • [PATCH 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last   Samuel Holland
    • [PATCH 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last   Paul Kocialkowski
      • [PATCH 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last   Samuel Holland
      • [PATCH 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last   Paul Kocialkowski
  • [PATCH 7/8] phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook   Samuel Holland
  • [PATCH 8/8] phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant   Samuel Holland
• [RFC 0/4] rockchip-dsi for rk3568   Chris Morgan
  • [RFC 3/4] drm/rockchip: dsi: add rk3568 support   Chris Morgan
  • [RFC 4/4] phy/rockchip: inno-dsidphy: Add support for rk3568   Chris Morgan
  • [RFC 0/4] rockchip-dsi for rk3568   Peter Geis
• [RFC 1/4] dt-bindings: display: rockchip-dsi: add rk3568 compatible   Chris Morgan
  • [RFC 1/4] dt-bindings: display: rockchip-dsi: add rk3568 compatible   Rob Herring
• [RFC 2/4] dt-bindings: phy: phy-rockchip-inno-dsidphy: add compatible for rk3568   Chris Morgan
  • [RFC 2/4] dt-bindings: phy: phy-rockchip-inno-dsidphy: add compatible for rk3568   Rob Herring
• [PATCH AUTOSEL 5.19 57/64] phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks   Sasha Levin
• [PATCH AUTOSEL 5.18 49/56] phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks   Sasha Levin
• [PATCH AUTOSEL 5.15 41/46] phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks   Sasha Levin
• [PATCH 0/2] usb: tegra: power down UTMI pad   Jim Lin
  • [PATCH 1/2] phy: tegra: xusb: add utmi pad power on/down ops   Jim Lin
  • [PATCH 2/2] usb: gadget: tegra: Reduce pad power   Jim Lin
• [RFC PATCH] phy: phy-mtk-tphy: Make USB PHY work on MT6735   Yassine Oudjana
  • [RFC PATCH] phy: phy-mtk-tphy: Make USB PHY work on MT6735   Chunfeng Yun
• [PATCH v2 0/2] Add support for QSGMII mode   Siddharth Vadapalli
  • [PATCH v2 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Siddharth Vadapalli
    • [PATCH v2 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Rob Herring
      • [PATCH v2 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Siddharth Vadapalli
  • [PATCH v2 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Siddharth Vadapalli
• [PATCH v2 0/2] usb: tegra: power down UTMI pad   Jim Lin
  • [PATCH v2 1/2] phy: tegra: xusb: add utmi pad power on/down ops   Jim Lin
  • [PATCH v2 2/2] usb: gadget: tegra: Reduce pad power   Jim Lin
• [PATCH] MAINTAINERS: Update email of Neil Armstrong   Neil Armstrong
  • [PATCH] MAINTAINERS: Update email of Neil Armstrong   Rob Herring
• [PATCH v2] dt-bindings: phy: Update Pratyush Yadav's email   Krzysztof Kozlowski
  • [PATCH v2] dt-bindings: phy: Update Pratyush Yadav's email   Pratyush Yadav
    • [PATCH v2] dt-bindings: phy: Update Pratyush Yadav's email   Krzysztof Kozlowski
• [PATCH 0/4] mfd/phy/remoteproc: dt-bindings: syscon: be specific   Krzysztof Kozlowski
  • [PATCH 1/4] dt-bindings: phy: hisilicon,hi3660-usb3: simplify example   Krzysztof Kozlowski
  • [PATCH 2/4] dt-bindings: phy: hisilicon,hi3670-usb3: simplify example   Krzysztof Kozlowski
  • [PATCH 3/4] dt-bindings: remoteproc: qcom,pil-info: add missing imem compatible   Krzysztof Kozlowski
  • [PATCH 4/4] dt-bindings: mfd: syscon: require specific compatible also for simple-mfd   Krzysztof Kozlowski
• [PATCH linux-phy 0/4] mvebu a3720 comphy: Fix serdes transmit amplitude   Marek Behún
  • [PATCH linux-phy 1/4] string.h: Add str_has_proper_prefix()   Marek Behún
  • [PATCH linux-phy 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Marek Behún
  • [PATCH linux-phy 3/4] phy: marvell: phy-mvebu-a3700-comphy: Support changing tx amplitude for ethernet   Marek Behún
    • [PATCH linux-phy 3/4] phy: marvell: phy-mvebu-a3700-comphy: Support changing tx amplitude for ethernet   Marek Behún
  • [PATCH linux-phy 4/4] arm64: dts: armada-3720-turris-mox: Change comphy tx amplitude for 2500base-x mode   Marek Behún
• [PATCH linux-phy v2 0/4] mvebu a3720 comphy: Fix serdes transmit amplitude   Marek Behún
  • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Marek Behún
    • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Andy Shevchenko
      • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Marek Behún
      • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Andy Shevchenko
      • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Marek Behún
      • [PATCH linux-phy v2 1/4] string.h: Add str_has_proper_prefix()   Marek Behún
  • [PATCH linux-phy v2 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Marek Behún
    • [PATCH linux-phy v2 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Andy Shevchenko
      • [PATCH linux-phy v2 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Marek Behún
      • [PATCH linux-phy v2 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Andy Shevchenko
      • [PATCH linux-phy v2 2/4] device property: Add {fwnode/device}_get_tx_p2p_amplitude()   Marek Behún
  • [PATCH linux-phy v2 3/4] phy: marvell: phy-mvebu-a3700-comphy: Support changing tx amplitude for ethernet   Marek Behún
  • [PATCH linux-phy v2 4/4] arm64: dts: armada-3720-turris-mox: Change comphy tx amplitude for 2500base-x mode   Marek Behún
• [PATCH v3 0/6] Add the iMX8MP PCIe support   Richard Zhu
  • [PATCH v3 1/6] reset: imx7: Add the iMX8MP PCIe PHY PERST support   Richard Zhu
    • [PATCH v3 1/6] reset: imx7: Add the iMX8MP PCIe PHY PERST support   Philipp Zabel
      • [PATCH v3 1/6] reset: imx7: Add the iMX8MP PCIe PHY PERST support   Hongxing Zhu
      • [PATCH v3 1/6] reset: imx7: Add the iMX8MP PCIe PHY PERST support   Lorenzo Pieralisi
      • [PATCH v3 1/6] reset: imx7: Add the iMX8MP PCIe PHY PERST support   Hongxing Zhu
  • [PATCH v3 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding   Richard Zhu
    • [PATCH v3 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding   Rob Herring
      • [PATCH v3 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding   Hongxing Zhu
      • [PATCH v3 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding   Hongxing Zhu
  • [PATCH v3 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Richard Zhu
  • [PATCH v3 4/6] arm64: dts: imx8mp: add the iMX8MP PCIe support   Richard Zhu
  • [PATCH v3 5/6] arm64: dts: imx8mp-evk: Add PCIe support   Richard Zhu
  • [PATCH v3 6/6] PCI: imx6: Add the iMX8MP PCIe support   Richard Zhu
  • [PATCH v3 0/6] Add the iMX8MP PCIe support   Marek Vasut
    • [PATCH v3 0/6] Add the iMX8MP PCIe support   Hongxing Zhu
      • [PATCH v3 0/6] Add the iMX8MP PCIe support   Marek Vasut
  • [PATCH v3 0/6] Add the iMX8MP PCIe support   Richard Leitner
    • [PATCH v3 0/6] Add the iMX8MP PCIe support   Hongxing Zhu
  • [PATCH v3 0/6] Add the iMX8MP PCIe support   Alexander Stein
    • [PATCH v3 0/6] Add the iMX8MP PCIe support   Hongxing Zhu
• [PATCH 0/4] Add support for Toshiba TC358746   Marco Felsch
  • [PATCH 4/4] media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver   Marco Felsch
  • [PATCH 0/4] Add support for Toshiba TC358746   Marco Felsch
• [PATCH 1/4] phy: dphy: refactor get_default_config   Marco Felsch
• [PATCH 2/4] phy: dphy: add support to calculate the timing based on hs_clk_rate   Marco Felsch
• [PATCH 3/4] media: dt-bindings: add bindings for Toshiba TC358746   Marco Felsch
  • [PATCH 3/4] media: dt-bindings: add bindings for Toshiba TC358746   Rob Herring
• [PATCH] phy: move from strlcpy with unused retval to strscpy   Wolfram Sang
  • [PATCH] phy: move from strlcpy with unused retval to strscpy   Jernej Škrabec
  • [PATCH] phy: move from strlcpy with unused retval to strscpy   Vinod Koul
• [PATCH 1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII   Chunfeng Yun
  • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
    • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
      • [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
  • [PATCH 3/7] phy: phy-mtk-tphy: add property to set pre-emphasis   Chunfeng Yun
  • [PATCH 4/7] phy: phy-mtk-tphy: disable hardware efuse when set INTR   Chunfeng Yun
  • [PATCH 5/7] phy: phy-mtk-tphy: disable gpio mode for all usb2 phys   Chunfeng Yun
  • [PATCH 6/7] phy: phy-mtk-tphy: set utmi 0 register in init() ops   Chunfeng Yun
  • [PATCH 7/7] phy: phy-mtk-tphy: fix the phy type setting issue   Chunfeng Yun
  • [PATCH 1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII   Rob Herring
  • [PATCH 1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII   Nícolas F. R. A. Prado
    • [PATCH 1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII   Chunfeng Yun
• [PATCH v3 0/2] Add support for QSGMII mode   Siddharth Vadapalli
• [PATCH v3 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Siddharth Vadapalli
  • [PATCH v3 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Rob Herring
    • [PATCH v3 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200   Siddharth Vadapalli
• [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Siddharth Vadapalli
  • [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Roger Quadros
    • [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Siddharth Vadapalli
      • [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Roger Quadros
      • [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Siddharth Vadapalli
      • [PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200   Roger Quadros
• [PATCH 0/3] Add support for the RK356x variant of the Inno CSI DPHY   Michael Riesch
• [PATCH] phy: rockchip-inno-usb2: Return zero after otg sync   Peter Geis
  • [PATCH] phy: rockchip-inno-usb2: Return zero after otg sync   Samuel Holland
    • [PATCH] phy: rockchip-inno-usb2: Return zero after otg sync   Peter Geis
  • [PATCH] phy: rockchip-inno-usb2: Return zero after otg sync   Heiko Stübner
• [PATCH v1 0/2] Fix the wrong order of phy callbacks   Richard Zhu
  • [PATCH v1 2/2] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()   Richard Zhu
  • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Alexander Stein
    • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Hongxing Zhu
  • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Ahmad Fatoum
    • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Hongxing Zhu
      • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Ahmad Fatoum
      • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Hongxing Zhu
      • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Bjorn Helgaas
      • [PATCH v1 0/2] Fix the wrong order of phy callbacks   Hongxing Zhu
• [PATCH v1 1/2] PCI: imx6: Fix the wrong order of phy_init() and phy_power_on()   Richard Zhu
• [PATCH v1 0/1] Convert phy-ocelot-serdes documentation to YAML   Colin Foster
  • [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML   Colin Foster
    • [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML   Krzysztof Kozlowski
      • [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML   Colin Foster
    • [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML   Rob Herring
      • [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML   Colin Foster
• [PATCH 1/3] dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy   Heiko Stübner
• [PATCH 2/3] phy: rockchip: add support for the rk356x variant to rockchip-inno-csidphy   Heiko Stübner
• [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync   Peter Geis
  • [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync   Heiko Stübner
  • [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync   Michael Riesch
    • [PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync   Peter Geis
• [PATCH] dt-bindings: phy: Add missing (unevaluated|additional)Properties on child nodes   Rob Herring
  • [PATCH] dt-bindings: phy: Add missing (unevaluated|additional)Properties on child nodes   Krzysztof Kozlowski
  • [PATCH] dt-bindings: phy: Add missing (unevaluated|additional)Properties on child nodes   Vinod Koul
• [PATCH v3 2/3] drm/msm/hdmi: make hdmi_phy_8996 OF clk provider   Abhinav Kumar
• [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync   Peter Geis
• [PATCH v1 1/4] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Manivannan Sadhasivam
• [PATCH v1 2/4] phy: qcom-qmp-pcie: support separate tables for EP mode   Manivannan Sadhasivam
• [PATCH v1 3/4] PCI: qcom: Setup PHY to work in RC mode   Manivannan Sadhasivam
  • [PATCH v1 3/4] PCI: qcom: Setup PHY to work in RC mode   Manivannan Sadhasivam
• [PATCH v2 0/6] PCI: qcom: Support using the same PHY for both RC and EP   Dmitry Baryshkov
  • [PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Dmitry Baryshkov
    • [PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Vinod Koul
      • [PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Dmitry Baryshkov
    • [PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Johan Hovold
      • [PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part   Dmitry Baryshkov
  • [PATCH v2 3/6] phy: qcom-qmp-pcie: support separate tables for EP mode   Dmitry Baryshkov
  • [PATCH v2 4/6] PCI: qcom: Setup PHY to work in RC mode   Dmitry Baryshkov
  • [PATCH v2 5/6] PCI: qcom-ep: Setup PHY to work in EP mode   Dmitry Baryshkov
    • [PATCH v2 5/6] PCI: qcom-ep: Setup PHY to work in EP mode   Vinod Koul
  • [PATCH v2 6/6] phy: qcom-qmp-pcie: Support SM8450 PCIe1 PHY in EP mode   Dmitry Baryshkov
• [PATCH v2 1/6] phy: qcom-qmp-pcie: drop if (table) conditions   Dmitry Baryshkov
• [PATCH v5 0/5] RK3568 PCIe V3 support   Frank Wunderlich
  • [PATCH v5 1/5] dt-bindings: phy: rockchip: add PCIe v3 phy   Frank Wunderlich
  • [PATCH v5 2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf   Frank Wunderlich
  • [PATCH v5 3/5] phy: rockchip: Support PCIe v3   Frank Wunderlich
  • [PATCH v5 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes   Frank Wunderlich
  • [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Frank Wunderlich
    • [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Krzysztof Kozlowski
      • Aw: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Frank Wunderlich
      • Aw: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Krzysztof Kozlowski
      • Aw: Re: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Frank Wunderlich
      • Aw: Re: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro   Krzysztof Kozlowski
• [PATCH net-next] phy: lan966x: add support for QUSGMII   Maxime Chevallier
  • [PATCH net-next] phy: lan966x: add support for QUSGMII   patchwork-bot+netdevbpf at kernel.org
• [PATCH v3 3/3] arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node   Dmitry Baryshkov
• [PATCH 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY   Lucas Stach
  • [PATCH 2/2] phy: freescale: add Samsung HDMI PHY   Lucas Stach
    • [PATCH 2/2] phy: freescale: add Samsung HDMI PHY   Krzysztof Kozlowski
  • [PATCH 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY   Krzysztof Kozlowski
• [PATCH v2 1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII   Chunfeng Yun
  • [PATCH v2 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
    • [PATCH v2 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
      • [PATCH v2 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Chunfeng Yun
      • [PATCH v2 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis   Krzysztof Kozlowski
• [PATCH v2 3/7] phy: phy-mtk-tphy: add property to set pre-emphasis   Chunfeng Yun
  • [PATCH v2 3/7] phy: phy-mtk-tphy: add property to set pre-emphasis   AngeloGioacchino Del Regno
• [PATCH v2 4/7] phy: phy-mtk-tphy: disable hardware efuse when set INTR   Chunfeng Yun
  • [PATCH v2 4/7] phy: phy-mtk-tphy: disable hardware efuse when set INTR   AngeloGioacchino Del Regno
• [PATCH v2 5/7] phy: phy-mtk-tphy: disable gpio mode for all usb2 phys   Chunfeng Yun
• [PATCH v2 6/7] phy: phy-mtk-tphy: set utmi 0 register in init() ops   Chunfeng Yun
• [PATCH v2 7/7] phy: phy-mtk-tphy: fix the phy type setting issue   Chunfeng Yun
  • [PATCH v2 7/7] phy: phy-mtk-tphy: fix the phy type setting issue   AngeloGioacchino Del Regno
• [PATCH v4 0/6] Add iMX8MP PCIe support   Richard Zhu
  • [PATCH v4 1/6] reset: imx7: Fix the iMX8MP PCIe PHY PERST support   Richard Zhu
  • [PATCH v4 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding   Richard Zhu
  • [PATCH v4 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Richard Zhu
  • [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support   Richard Zhu
    • [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support   Lucas Stach
      • [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support   Hongxing Zhu
  • [PATCH v4 5/6] arm64: dts: imx8mp-evk: Add PCIe support   Richard Zhu
  • [PATCH v4 6/6] PCI: imx6: Add iMX8MP PCIe support   Richard Zhu
  • [PATCH 1/2] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets   Lucas Stach
    • [PATCH 2/2] fixup! phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Lucas Stach
      • [PATCH 2/2] fixup! phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Vinod Koul
  • [PATCH v4 0/6] Add iMX8MP PCIe support   Lucas Stach
    • [PATCH v4 0/6] Add iMX8MP PCIe support   Hongxing Zhu
      • [PATCH v4 0/6] Add iMX8MP PCIe support   Lucas Stach
      • [PATCH v4 0/6] Add iMX8MP PCIe support   Hongxing Zhu
• [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support   Pali Rohár
  • [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support   Shinichiro Kawasaki
  • [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support   Vinod Koul
• [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
  • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Vinod Koul
    • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
  • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Vinod Koul
    • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
      • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Vinod Koul
      • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
      • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Vinod Koul
      • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Dmitry Baryshkov
      • [PATCH v3 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
• [PATCH v1 1/2] doc: dt-binding: mxs-usb-phy: fix fsl,tx-cal-45-dn-ohms max and min value   Frank Li
  • [PATCH v1 2/2] usb: phy: mxs: fix MXS_PHY_TX_CAL45_MIN and MXS_PHY_TX_CAL45_MAX   Frank Li
  • [PATCH v1 1/2] doc: dt-binding: mxs-usb-phy: fix fsl,tx-cal-45-dn-ohms max and min value   Krzysztof Kozlowski
• [PATCH 0/7] phy: ti: phy-j721e-wiz: Add support for j7200-wiz-10g   Vinod Koul
• [PATCH v3 1/3] clk: asm9260: use new helper for fixed rate clock creation   Vinod Koul
• [PATCH 3/6] dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM6375   Vinod Koul
• [PATCH] phy: tegra: xusb: check the return value of devm_kzalloc() in tegra_xusb_setup_usb_role_switch()   Vinod Koul
• [PATCH] phy: tegra: xusb: Only warn once reset problems in .remove()   Vinod Koul
• [PATCH RESEND v2] dt-bindings: phy: samsung,ufs-phy: match clock items   Vinod Koul
• [PATCH v5 0/7] Add the iMX8MP PCIe support   Richard Zhu
  • [PATCH v5 1/7] dt-binding: phy: Add iMX8MP PCIe PHY binding   Richard Zhu
  • [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add PCIe support   Richard Zhu
    • [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add PCIe support   Marcel Ziswiler
      • [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add PCIe support   Hongxing Zhu
  • [PATCH v5 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets   Richard Zhu
    • [PATCH v5 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets   Lucas Stach
      • [PATCH v5 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets   Hongxing Zhu
  • [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Richard Zhu
    • [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Lucas Stach
      • [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Hongxing Zhu
      • [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Lucas Stach
      • [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support   Hongxing Zhu
  • [PATCH v5 7/7] PCI: imx6: Add iMX8MP PCIe support   Richard Zhu
• [PATCH v5 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support   Richard Zhu
• [PATCH v5 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support   Richard Zhu
  • [PATCH v5 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support   Philipp Zabel
    • [PATCH v5 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support   Hongxing Zhu
• [PATCH v4 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Johan Hovold
  • [PATCH v4 03/30] dt-bindings: phy: qcom,qmp: drop redundant descriptions   Johan Hovold
  • [PATCH v4 04/30] dt-bindings: phy: qcom,qmp: fix child node description   Johan Hovold
  • [PATCH v4 06/30] dt-bindings: phy: qcom,qmp: clean up example   Johan Hovold
  • [PATCH v4 08/30] dt-bindings: phy: add qcom,msm8996-qmp-pcie-phy schema   Johan Hovold
  • [PATCH v4 09/30] dt-bindings: phy: qcom,msm8996-qmp-pcie: add missing child node schema   Johan Hovold
  • [PATCH v4 10/30] dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate PIPE clock names   Johan Hovold
  • [PATCH v4 11/30] dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate reset names   Johan Hovold
  • [PATCH v4 12/30] dt-bindings: phy: add QMP PCIe PHY schema   Johan Hovold
  • [PATCH v4 13/30] dt-bindings: phy: qcom,qmp-pcie: add missing child node schema   Johan Hovold
  • [PATCH v4 14/30] dt-bindings: phy: qcom,qmp-pcie: deprecate PIPE clock name   Johan Hovold
  • [PATCH v4 15/30] dt-bindings: phy: add QMP UFS PHY schema   Johan Hovold
  • [PATCH v4 16/30] dt-bindings: phy: qcom,qmp-ufs: add missing SM8450 clock   Johan Hovold
  • [PATCH v4 17/30] dt-bindings: phy: qcom,qmp-ufs: add missing SM8150 power domain   Johan Hovold
  • [PATCH v4 18/30] dt-bindings: phy: qcom,qmp-ufs: add missing child node schema   Johan Hovold
  • [PATCH v4 19/30] dt-bindings: phy: add QMP USB PHY schema   Johan Hovold
  • [PATCH v4 20/30] dt-bindings: phy: qcom,qmp-usb: add missing child node schema   Johan Hovold
  • [PATCH v4 21/30] dt-bindings: phy: qcom,qmp-usb: deprecate PIPE clock name   Johan Hovold
  • [PATCH v4 22/30] dt-bindings: phy: qcom,qmp-usb: add missing qcom,sc7180-qmp-usb3-phy schema   Johan Hovold
  • [PATCH v4 23/30] dt-bindings: phy: qcom,qmp-usb3-dp: fix bogus clock-cells property   Johan Hovold
  • [PATCH v4 24/30] dt-bindings: phy: qcom,qmp-usb3-dp: deprecate USB PIPE clock name   Johan Hovold
  • [PATCH v4 25/30] phy: qcom-qmp-pcie: drop pipe clock lane suffix   Johan Hovold
  • [PATCH v4 26/30] phy: qcom-qmp-combo: drop unused lane reset   Johan Hovold
  • [PATCH v4 27/30] phy: qcom-qmp-combo: drop pipe clock lane suffix   Johan Hovold
  • [PATCH v4 28/30] phy: qcom-qmp-pcie-msm8996: drop pipe clock lane suffix   Johan Hovold
  • [PATCH v4 29/30] phy: qcom-qmp-pcie-msm8996: drop reset lane suffix   Johan Hovold
  • [PATCH v4 30/30] phy: qcom-qmp-usb: drop pipe clock lane suffix   Johan Hovold
  • [PATCH v4 00/30] phy: qcom,qmp: fix dt-bindings and deprecate lane suffix   Vinod Koul
• [PATCH v4 01/30] dt-bindings: phy: qcom,qmp: fix bogus clock-cells property   Johan Hovold
• [PATCH v4 02/30] dt-bindings: phy: qcom,qmp: sort compatible strings   Johan Hovold
• [PATCH v4 05/30] dt-bindings: phy: qcom,qmp: clean up descriptions   Johan Hovold
• [PATCH v4 07/30] dt-bindings: phy: qcom,qmp: drop child-node comment   Johan Hovold
• [PATCH v1 1/1] usb: phy: mxs: apply board calibration value base on chip trim value   Frank Li
  • [PATCH v1 1/1] usb: phy: mxs: apply board calibration value base on chip trim value   Krzysztof Kozlowski
    • [EXT] Re: [PATCH v1 1/1] usb: phy: mxs: apply board calibration value base on chip trim value   Frank Li
• [PATCH] phy: amlogic: use devm_clk_get_enabled() to simplify the code   Heiner Kallweit
  • [PATCH] phy: amlogic: use devm_clk_get_enabled() to simplify the code   Neil Armstrong
• [PATCH v11 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters   Bjorn Andersson
  • [PATCH v11 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters   Krishna Kurapati PSSNV
• [net-next PATCH v2] net: phy: Add 1000BASE-KX interface mode   Sean Anderson
  • [net-next PATCH v2] net: phy: Add 1000BASE-KX interface mode   kernel test robot
• [PATCH v2] phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()   Richard Zhu
• cn9130-crb PCI support   Tim Harvey
• [PATCH v6 0/7] Add the iMX8MP PCIe support   Richard Zhu
  • [PATCH v6 3/7] arm64: dts: imx8mp-evk: Add PCIe support   Richard Zhu
  • [PATCH v6 4/7] reset: imx7: Fix the iMX8MP PCIe PHY PERST support   Richard Zhu
  • [PATCH v6 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets   Richard Zhu
  • [PATCH v6 6/7] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support   Richard Zhu
  • [PATCH v6 7/7] PCI: imx6: Add i.MX8MP PCIe support   Richard Zhu
• [PATCH v6 1/7] dt-binding: phy: Add iMX8MP PCIe PHY binding   Richard Zhu
• [PATCH v6 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support   Richard Zhu

Last message date: Wed Aug 31 21:02:40 PDT 2022
Archived on: Wed Aug 31 21:21:33 PDT 2022

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...