[PATCH 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY

[Krzysztof Kozlowski]

On 26/08/2022 22:20, Lucas Stach wrote:
> Add a DT binding for the HDMI PHY found on the i.MX8MP SoC.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  .../bindings/phy/fsl,imx8mp-hdmi-phy.yaml     | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
> new file mode 100644
> index 000000000000..2118f964cad4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,imx8mp-hdmi-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8MP HDMI PHY binding
> +
> +maintainers:
> +  - Lucas Stach <l.stach at pengutronix.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mp-hdmi-phy
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  clocks:
> +    minItems: 2

No need for minItems.

> +    maxItems: 2
> +

Rest looks ok, so with above:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Best regards,
Krzysztof