[PATCH v5 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets

[Lucas Stach]

Am Dienstag, dem 30.08.2022 um 15:46 +0800 schrieb Richard Zhu:
> From: Lucas Stach <l.stach at pengutronix.de>
> 
> Dessert the PHY reset when powering up the domain and put it back
> into reset when the domain is powered down.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>

According to patch submission guidelines you need to add your own sign-
off when integrating this patch into your series. Please add in the
next revision.

Regards,
Lucas

> ---
>  drivers/soc/imx/imx8mp-blk-ctrl.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c
> index 4ca2ede6871b..6c939d68ba9a 100644
> --- a/drivers/soc/imx/imx8mp-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
> @@ -18,6 +18,8 @@
>  #define GPR_REG0		0x0
>  #define  PCIE_CLOCK_MODULE_EN	BIT(0)
>  #define  USB_CLOCK_MODULE_EN	BIT(1)
> +#define  PCIE_PHY_APB_RST	BIT(4)
> +#define  PCIE_PHY_INIT_RST	BIT(5)
>  
>  struct imx8mp_blk_ctrl_domain;
>  
> @@ -75,6 +77,10 @@ static void imx8mp_hsio_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
>  	case IMX8MP_HSIOBLK_PD_PCIE:
>  		regmap_set_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
>  		break;
> +	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
> +		regmap_set_bits(bc->regmap, GPR_REG0,
> +				PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
> +		break;
>  	default:
>  		break;
>  	}
> @@ -90,6 +96,10 @@ static void imx8mp_hsio_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
>  	case IMX8MP_HSIOBLK_PD_PCIE:
>  		regmap_clear_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
>  		break;
> +	case IMX8MP_HSIOBLK_PD_PCIE_PHY:
> +		regmap_clear_bits(bc->regmap, GPR_REG0,
> +				  PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
> +		break;
>  	default:
>  		break;
>  	}