[PATCH] phy: amlogic: use devm_clk_get_enabled() to simplify the code
Heiner Kallweit
hkallweit1 at gmail.com
Tue Aug 30 10:16:07 PDT 2022
Simplify the code by using devm_clk_get_enabled().
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
.../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 32 ++++---------------
1 file changed, 6 insertions(+), 26 deletions(-)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index 54d65a6f0..d2a1da8d9 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -388,7 +388,6 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
struct phy_g12a_usb3_pcie_priv *priv;
struct phy_provider *phy_provider;
void __iomem *base;
- int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -408,43 +407,24 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
if (IS_ERR(priv->regmap_cr))
return PTR_ERR(priv->regmap_cr);
- priv->clk_ref = devm_clk_get(dev, "ref_clk");
+ priv->clk_ref = devm_clk_get_enabled(dev, "ref_clk");
if (IS_ERR(priv->clk_ref))
return PTR_ERR(priv->clk_ref);
- ret = clk_prepare_enable(priv->clk_ref);
- if (ret)
- return ret;
-
priv->reset = devm_reset_control_array_get_exclusive(dev);
- if (IS_ERR(priv->reset)) {
- ret = PTR_ERR(priv->reset);
- goto err_disable_clk_ref;
- }
+ if (IS_ERR(priv->reset))
+ return PTR_ERR(priv->reset);
priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
- if (IS_ERR(priv->phy)) {
- ret = PTR_ERR(priv->phy);
- dev_err_probe(dev, ret, "failed to create PHY\n");
- goto err_disable_clk_ref;
- }
+ if (IS_ERR(priv->phy))
+ return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
phy_set_drvdata(priv->phy, priv);
dev_set_drvdata(dev, priv);
phy_provider = devm_of_phy_provider_register(dev,
phy_g12a_usb3_pcie_xlate);
- if (IS_ERR(phy_provider)) {
- ret = PTR_ERR(phy_provider);
- goto err_disable_clk_ref;
- }
-
- return 0;
-
-err_disable_clk_ref:
- clk_disable_unprepare(priv->clk_ref);
-
- return ret;
+ return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
--
2.37.2
More information about the linux-phy
mailing list