[PATCH v2] phy: rockchip-inno-usb2: Return zero after otg sync
Peter Geis
pgwipeout at gmail.com
Tue Aug 23 07:47:28 PDT 2022
The otg sync state patch reuses the ret variable, but fails to set it to
zero after use. This leads to a situation when the otg port is in
peripheral mode where the otg phy aborts halfway through setup. It also
fails to account for a failure to register the extcon notifier. Fix this
by using our own variable and skipping otg sync in case of failure.
Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
Reported-by: Markus Reichl <m.reichl at fivetechno.de>
Reported-by: Michael Riesch <michael.riesch at wolfvision.net>
Signed-off-by: Peter Geis <pgwipeout at gmail.com>
Tested-by: Michael Riesch <michael.riesch at wolfvision.net>
Tested-by: Markus Reichl <m.reichl at fivetechno.de>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 0b1e9337ee8e..d579a22c61df 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
{
- int ret;
+ int ret, id;
rport->port_id = USB2PHY_PORT_OTG;
rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
@@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
EXTCON_USB_HOST, &rport->event_nb);
if (ret)
dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ goto out;
if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
/* do initial sync of usb state */
- ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
- extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
}
}
--
2.25.1
More information about the linux-phy
mailing list