[PATCH v2 2/6] phy: qcom-qmp-pcie: split register tables into primary and secondary part

[Vinod Koul]

On 25-08-22, 13:50, Dmitry Baryshkov wrote:
> SM8250 configuration tables are split into two parts: the common one and
> the PHY-specific tables. Make this split more formal. Rather than having
> a blind renamed copy of all QMP table fields, add separate struct
> qmp_phy_cfg_tables and add two instances of this structure to the struct
> qmp_phy_cfg. Later on this will be used to support different PHY modes
> (RC vs EP).

This lgtm with once nit

> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 141 +++++++++++++----------
>  1 file changed, 83 insertions(+), 58 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index c84846020272..60cbd2eae346 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1346,34 +1346,33 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
>  
>  struct qmp_phy;
>  
> -/* struct qmp_phy_cfg - per-PHY initialization config */
> -struct qmp_phy_cfg {
> -	/* phy-type - PCIE/UFS/USB */
> -	unsigned int type;
> -	/* number of lanes provided by phy */
> -	int nlanes;
> -
> -	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> +struct qmp_phy_cfg_tables {
>  	const struct qmp_phy_init_tbl *serdes_tbl;
>  	int serdes_tbl_num;
> -	const struct qmp_phy_init_tbl *serdes_tbl_sec;
> -	int serdes_tbl_num_sec;
>  	const struct qmp_phy_init_tbl *tx_tbl;
>  	int tx_tbl_num;
> -	const struct qmp_phy_init_tbl *tx_tbl_sec;
> -	int tx_tbl_num_sec;
>  	const struct qmp_phy_init_tbl *rx_tbl;
>  	int rx_tbl_num;
> -	const struct qmp_phy_init_tbl *rx_tbl_sec;
> -	int rx_tbl_num_sec;
>  	const struct qmp_phy_init_tbl *pcs_tbl;
>  	int pcs_tbl_num;
> -	const struct qmp_phy_init_tbl *pcs_tbl_sec;
> -	int pcs_tbl_num_sec;
>  	const struct qmp_phy_init_tbl *pcs_misc_tbl;
>  	int pcs_misc_tbl_num;
> -	const struct qmp_phy_init_tbl *pcs_misc_tbl_sec;
> -	int pcs_misc_tbl_num_sec;
> +};
> +
> +/* struct qmp_phy_cfg - per-PHY initialization config */
> +struct qmp_phy_cfg {
> +	/* phy-type - PCIE/UFS/USB */
> +	unsigned int type;
> +	/* number of lanes provided by phy */
> +	int nlanes;
> +
> +	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> +	struct qmp_phy_cfg_tables primary;
> +	/*
> +	 * Init sequence for PHY blocks, providing additional register
> +	 * programming. Unless required it can be left omitted.
> +	 */
> +	struct qmp_phy_cfg_tables secondary;

since this is optional but always defined, we would waste memory here,
can we make this a pointer and initialize to null when secondary is not
present

-- 
~Vinod