[PATCH 1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property

[Rob Herring]

On Fri, 12 Aug 2022 02:55:56 -0500, Samuel Holland wrote:
> The sun6i DPHY can generate several interrupts, mostly for reporting
> error conditions, but also for detecting BTA and UPLS sequences.
> Document this capability in order to accurately describe the hardware.
> 
> The DPHY has no interrupt number provided in the vendor documentation
> because its interrupt line is shared with the DSI controller.
> 
> Fixes: c25b84c00826 ("dt-bindings: display: Convert Allwinner DSI to a schema")
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
> 
>  .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml           | 4 ++++
>  1 file changed, 4 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.example.dtb: d-phy at 1ca1000: 'oneOf' conditional failed, one must be fixed:
	'interrupts' is a required property
	'interrupts-extended' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.