[PATCH v4 0/6] Add iMX8MP PCIe support
Hongxing Zhu
hongxing.zhu at nxp.com
Tue Aug 30 00:52:27 PDT 2022
> -----Original Message-----
> From: Lucas Stach <l.stach at pengutronix.de>
> Sent: 2022年8月30日 15:46
> To: Hongxing Zhu <hongxing.zhu at nxp.com>; p.zabel at pengutronix.de;
> bhelgaas at google.com; lorenzo.pieralisi at arm.com; robh at kernel.org;
> shawnguo at kernel.org; vkoul at kernel.org; alexander.stein at ew.tq-group.com;
> marex at denx.de; richard.leitner at linux.dev
> Cc: linux-phy at lists.infradead.org; devicetree at vger.kernel.org;
> linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; kernel at pengutronix.de; dl-linux-imx
> <linux-imx at nxp.com>
> Subject: Re: [PATCH v4 0/6] Add iMX8MP PCIe support
>
> Am Dienstag, dem 30.08.2022 um 02:58 +0000 schrieb Hongxing Zhu:
> > > -----Original Message-----
> > > From: Lucas Stach <l.stach at pengutronix.de>
> > > Sent: 2022年8月29日 23:20
> > > To: Hongxing Zhu <hongxing.zhu at nxp.com>; p.zabel at pengutronix.de;
> > > bhelgaas at google.com; lorenzo.pieralisi at arm.com; robh at kernel.org;
> > > shawnguo at kernel.org; vkoul at kernel.org;
> > > alexander.stein at ew.tq-group.com; marex at denx.de;
> > > richard.leitner at linux.dev
> > > Cc: linux-phy at lists.infradead.org; devicetree at vger.kernel.org;
> > > linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> > > linux-kernel at vger.kernel.org; kernel at pengutronix.de; dl-linux-imx
> > > <linux-imx at nxp.com>
> > > Subject: Re: [PATCH v4 0/6] Add iMX8MP PCIe support
> > >
> > > Hi Richard,
> > >
> > > instead of review comments I sent you a two patches to rework things
> > > more to my liking. Hope you agree with the approach.
> > >
> > > One question, though: did you test this with devices with Gen2/3
> > > speeds? The Marvell WiFi module on my EVK board only links with
> > > Gen1, while it claims
> > > Gen2 speed in the LnkCap register. However, it does seem to come up
> > > with
> > > Gen1 as the target link speed in LnkCtl2, so maybe the device is at fault
> here.
> > Hi Lucas:
> > Thanks for your help on this series.
> > I'm agree with your approach, and let blk-ctrl driver do the hsiomix resets.
> > Can I include the #1 patch into this series, and rebase the 2# fixup!
> > patch
> > into the phy changes patch with your sign-off?
> >
> Sure, that's why I sent them this way. Feel free to include them in your series
> with my sign-off.
Got that, thanks a lot.
>
> > Yes, I did the Gen3 NVEM device tests on i.MX8MP EVK board.
> > The Gen3 works fine.
> > Logs:
> > "
> > [ 1.808033] phy phy-32f00000.pcie-phy.1: phy_power_on was called
> before phy_init
> > [ 1.822609] imx6q-pcie 33800000.pcie: iATU unroll: enabled
> > [ 1.836620] imx6q-pcie 33800000.pcie: iATU regions: 4 ob, 4 ib, align
> 64K, limit 16G
> > [ 1.950427] imx6q-pcie 33800000.pcie: PCIe Gen.1 x1 link up
> > [ 2.058138] imx6q-pcie 33800000.pcie: PCIe Gen.3 x1 link up
> > [ 2.063731] imx6q-pcie 33800000.pcie: Link up, Gen3
> > [ 2.068619] imx6q-pcie 33800000.pcie: PCIe Gen.3 x1 link up
> > "
> Thanks for the confirmation.
>
> Also can you please reorder the series, to have the DT changes at the end?
Okay, would reorder the DT changes at the begin in next version.
Best Regards
Richard Zhu
>
> Regards,
> Lucas
>
> >
> > Best Regards
> > Richard Zhu
> > >
> > > Regards,
> > > Lucas
> > >
> > > Am Montag, dem 29.08.2022 um 16:15 +0800 schrieb Richard Zhu:
> > > > Based on the 6.0-rc1 of the pci/next branch.
> > > > This series adds the i.MX8MP PCIe support and tested on i.MX8MP
> > > > EVK board when one PCIe NVME device is used.
> > > >
> > > > - i.MX8MP PCIe has reversed initial PERST bit value refer to
> > > i.MX8MQ/i.MX8MM.
> > > > Add the PHY PERST explicitly for i.MX8MP PCIe PHY.
> > > > - Add the i.MX8MP PCIe PHY support in the i.MX8M PCIe PHY driver.
> > > > And share as much as possible codes with i.MX8MM PCIe PHY.
> > > > - Add the i.MX8MP PCIe support in binding document, DTS files, and
> > > > PCIe
> > > > driver.
> > > >
> > > > Main changes v3-->v4:
> > > > - Regarding Phillip's suggestions, add fix tag into the first commit.
> > > > - Add Reviewed and Tested tags.
> > > >
> > > > Main changes v2-->v3:
> > > > - Fix the schema checking error in the PHY dt-binding patch.
> > > > - Inspired by Lucas, the PLL configurations might not required
> > > > when
> > > > external OSC is used as PCIe referrence clock. It's true. Remove
> > > > all
> > > > the HSIO PLL bit manipulations, and PCIe works fine on i.MX8MP
> > > > EVK
> > > board
> > > > with one NVME device is used.
> > > > - Drop the #4 patch of v2, since it had been applied by Rob.
> > > >
> > > > Main changes v1-->v2:
> > > > - It's my fault forget including Vinod, re-send v2 after include
> > > > Vinod
> > > > and linux-phy at lists.infradead.org.
> > > > - List the basements of this patch-set. The branch, codes changes and so
> on.
> > > > - Clean up some useless register and bit definitions in #3 patch.
> > > >
> > > > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 16
> > > +++++++--
> > > > arch/arm64/boot/dts/freescale/imx8mp-evk.dts |
> 53
> > > +++++++++++++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi |
> 46
> > > ++++++++++++++++++++++++-
> > > > drivers/pci/controller/dwc/pci-imx6.c | 17
> > > +++++++++-
> > > > drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 150
> > >
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
> > > ------------------
> > > > drivers/reset/reset-imx7.c | 1
> +
> > > > 6 files changed, 232 insertions(+), 51 deletions(-)
> > > >
> > > > [PATCH v4 1/6] reset: imx7: Fix the iMX8MP PCIe PHY PERST support
> > > > [PATCH v4 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding [PATCH
> > > > v4 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY [PATCH v4
> > > > 4/6]
> > > > arm64: dts: imx8mp: Add iMX8MP PCIe support [PATCH v4 5/6] arm64:
> dts:
> > > > imx8mp-evk: Add PCIe support [PATCH v4 6/6] PCI: imx6: Add iMX8MP
> > > > PCIe support
> > >
> >
>
More information about the linux-phy
mailing list