[BUG BISECT] phy: rockchip-inno-usb2: Sync initial otg state
Markus Reichl
m.reichl at fivetechno.de
Tue Aug 2 05:39:34 PDT 2022
Hi,
with linux-next-20220728 rk3399-roc-pc does not boot.
Bisecting pointed to this commit.
By reverting this commit the board boots again.
[ 2.398700] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
[ 2.399517] Mem abort info:
[ 2.399772] ESR = 0x0000000096000004
[ 2.400114] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.400594] SET = 0, FnV = 0
[ 2.400873] EA = 0, S1PTW = 0
[ 2.401161] FSC = 0x04: level 0 translation fault
[ 2.401602] Data abort info:
[ 2.401864] ISV = 0, ISS = 0x00000004
[ 2.402212] CM = 0, WnR = 0
[ 2.402484] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000001376000
[ 2.403071] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 2.403687] Internal error: Oops: 96000004 [#1] SMP
[ 2.404130] Modules linked in: ip_tables x_tables ipv6 xhci_plat_hcd xhci_hcd
dwc3 rockchipdrm drm_cma_helper analogix_dp dw_hdmi realtek drm_display_helper
dwc3_of_simple dw_mipi_dsi ehci_platform ohci_platform ohci_hcd ehci_hcd
drm_kms_helper dwmac_rk syscopyarea sysfillrect stmmac_platform sysimgblt
fb_sys_fops usbcore stmmac pcs_xpcs drm phylink drm_panel_orientation_quirks
[ 2.407155] CPU: 4 PID: 71 Comm: kworker/4:6 Not tainted
5.19.0-rc8-next-20220728 #437
[ 2.407868] Hardware name: Firefly ROC-RK3399-PC Mezzanine Board (DT)
[ 2.408448] Workqueue: events rockchip_usb2phy_otg_sm_work
[ 2.408958] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.411634] pc : rockchip_usb2phy_otg_sm_work+0x50/0x330
[ 2.414332] lr : process_one_work+0x1d8/0x380
[ 2.416948] sp : ffff800009373d60
[ 2.419406] x29: ffff800009373d60 x28: 0000000000000000 x27: 0000000000000000
[ 2.422199] x26: ffff0000f779fcb8 x25: ffff0000f77a3a05 x24: 000000000000000c
[ 2.424978] x23: 0000000000000000 x22: ffff0000010c8258 x21: ffff80000888ec10
[ 2.427768] x20: ffff0000010c82f0 x19: 000000000000000c x18: 0000000000000001
[ 2.430604] x17: 000000040044ffff x16: 00400034b5503510 x15: 0000000000000000
[ 2.433390] x14: ffff000000708000 x13: ffff8000eec96000 x12: 0000000034d4d91d
[ 2.436185] x11: 0000000000000000 x10: 0000000000000a10 x9 : ffff000001aa7a74
[ 2.438958] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff000001aa7a74
[ 2.441668] x5 : 000073746e657665 x4 : 000000000000002f x3 : ffff00000356c808
[ 2.444407] x2 : ffff800009373da4 x1 : 000000000000e2ac x0 : ffff80000888eb34
[ 2.447190] Call trace:
[ 2.449557] rockchip_usb2phy_otg_sm_work+0x50/0x330
[ 2.452169] process_one_work+0x1d8/0x380
[ 2.454684] worker_thread+0x170/0x4e0
[ 2.457056] kthread+0xd8/0xdc
[ 2.459354] ret_from_fork+0x10/0x20
[ 2.461728] Code: 91037015 295be001 f9403c77 b940e413 (f94006e0)
[ 2.464338] ---[ end trace 0000000000000000 ]---
Am 22.06.22 um 02:31 schrieb Peter Geis:
> The initial otg state for the phy defaults to device mode. The actual
> state isn't detected until an ID IRQ fires. Fix this by syncing the ID
> state during initialization.
>
> Fixes: 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ")
> Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 6711659f727c..6e44069617df 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1162,6 +1162,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> EXTCON_USB_HOST, &rport->event_nb);
> if (ret)
> dev_err(rphy->dev, "register USB HOST notifier failed\n");
> +
> + if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> + /* do initial sync of usb state */
> + ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> + }
> }
>
> out:
Gruß,
--
Markus Reichl
More information about the linux-phy
mailing list