[PATCH v3 2/2] phy: ti: gmii-sel: Add support for CPSW5G GMII SEL in J7200
Siddharth Vadapalli
s-vadapalli at ti.com
Sun Aug 21 23:56:31 PDT 2022
Each of the CPSW5G ports in J7200 support additional modes like QSGMII.
Add a new compatible for J7200 to support the additional modes.
In TI's J7200, each of the CPSW5G ethernet interfaces can act as a
QSGMII or QSGMII-SUB port. The QSGMII interface is responsible for
performing auto-negotiation between the MAC and the PHY while the rest of
the interfaces are designated as QSGMII-SUB interfaces, indicating that
they will not be taking part in the auto-negotiation process.
To indicate the interface which will serve as the main QSGMII interface,
add a property "ti,qsgmii-main-ports", whose value indicates the
port number of the interface which shall serve as the main QSGMII
interface. The rest of the interfaces are then assigned QSGMII-SUB mode by
default.
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
drivers/phy/ti/phy-gmii-sel.c | 40 ++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index d0ab69750c6b..270083606b14 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -22,6 +22,12 @@
#define AM33XX_GMII_SEL_MODE_RMII 1
#define AM33XX_GMII_SEL_MODE_RGMII 2
+/* J72xx SoC specific definitions for the CONTROL port */
+#define J72XX_GMII_SEL_MODE_QSGMII 4
+#define J72XX_GMII_SEL_MODE_QSGMII_SUB 6
+
+#define PHY_GMII_PORT(n) BIT((n) - 1)
+
enum {
PHY_GMII_SEL_PORT_MODE = 0,
PHY_GMII_SEL_RGMII_ID_MODE,
@@ -43,6 +49,7 @@ struct phy_gmii_sel_soc_data {
u32 features;
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
bool use_of_data;
+ u64 extra_modes;
};
struct phy_gmii_sel_priv {
@@ -53,6 +60,7 @@ struct phy_gmii_sel_priv {
struct phy_gmii_sel_phy_priv *if_phys;
u32 num_ports;
u32 reg_offset;
+ u32 qsgmii_main_ports;
};
static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -88,10 +96,17 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII;
break;
+ case PHY_INTERFACE_MODE_QSGMII:
+ if (!(soc_data->extra_modes & BIT(PHY_INTERFACE_MODE_QSGMII)))
+ goto unsupported;
+ if (if_phy->priv->qsgmii_main_ports & BIT(if_phy->id - 1))
+ gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII;
+ else
+ gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII_SUB;
+ break;
+
default:
- dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
- if_phy->id, phy_modes(submode));
- return -EINVAL;
+ goto unsupported;
}
if_phy->phy_if_mode = submode;
@@ -123,6 +138,11 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
}
return 0;
+
+unsupported:
+ dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
+ if_phy->id, phy_modes(submode));
+ return -EINVAL;
}
static const
@@ -188,6 +208,13 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
.regfields = phy_gmii_sel_fields_am654,
};
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
+ .use_of_data = true,
+ .regfields = phy_gmii_sel_fields_am654,
+ .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+};
+
static const struct of_device_id phy_gmii_sel_id_table[] = {
{
.compatible = "ti,am3352-phy-gmii-sel",
@@ -209,6 +236,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
.compatible = "ti,am654-phy-gmii-sel",
.data = &phy_gmii_sel_soc_am654,
},
+ {
+ .compatible = "ti,j7200-cpsw5g-phy-gmii-sel",
+ .data = &phy_gmii_sel_cpsw5g_soc_j7200,
+ },
{}
};
MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
@@ -350,6 +381,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
const struct of_device_id *of_id;
struct phy_gmii_sel_priv *priv;
+ u32 main_ports = 1;
int ret;
of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
@@ -363,6 +395,8 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
priv->dev = &pdev->dev;
priv->soc_data = of_id->data;
priv->num_ports = priv->soc_data->num_ports;
+ of_property_read_u32_array(node, "ti,qsgmii-main-ports", &main_ports, 1);
+ priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports);
priv->regmap = syscon_node_to_regmap(node->parent);
if (IS_ERR(priv->regmap)) {
--
2.25.1
More information about the linux-phy
mailing list